NABEYA BI-TECH V Belt Pulleys

?* Information on days to ship and prices

• • Promotional pricing

  

  Standard V-Pulley

  NABEYA BI-TECH

  "Shaft hole, keyway and push screw machining standardized."
  [Features]
  · Japan's first standard inch size product.
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Imbalance mass allowance on outer circumference is 0.2% of pulley mass or 3 g, whichever is larger.
  · Same accuracy as the balance prescribed in JIS B 1854-1987, "General use V-pulley".* M-type pulleys are exempt.
  [Applications]
  · Fans, etc.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	11.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ISOMEC SP Pulley

  NABEYA BI-TECH

  V pulley to international standards. Either general purpose V-belt, or narrow width V-belt can be used.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Can be attached and removed from shaft / positioned with hex or socket wrench. In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission is achieved.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	42.00 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ISOMEC Polydrive Pulley

  NABEYA BI-TECH

  V-belt pulley with high power transmission and large rotation ratio.
  [Features]
  · High transmission efficiency. ISO 9982 compliant.
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Makes it possible to design a high-transmission efficiency system with a small pulley diameter, short shaft distance and narrow pulley width.
  ・ Can be attached and removed from shaft and positioned with hex or socket wrench.
  · In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission can be achieved.
  · Set the imbalance tolerance on the outer circumference to 1 g or 0.1% of the total mass of the pulley and bushing, whichever is larger.
  · Balancing is adjusted using a balancing machine.
  [Applications]
  · Automobiles, manufacturing machinery, air-conditioning equipment, electric tools, household appliances, etc.

  2D / 3D CAD data available

  Starting from∗ ：	75.99 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  JIS V-Pulley, B Type

  NABEYA BI-TECH

  Full lineup of V-belt pulleys that conform to JIS B 1854.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway and push screw machining standardized.
  · Extensive product range. 650 size. A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
  [Applications]
  · Fans, etc.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	27.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ISOMEC Bushing

  NABEYA BI-TECH

  Safe and reliable fastening system. Responding to a design change is easy.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	21.99 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  JIS V-Pulley, C Type

  NABEYA BI-TECH

  Top-quality pulley, with materials, machining precision and balance accuracy exceeding JIS standards.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway and push screw machining standardized.
  · A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately.
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Imbalance tolerance on outer circumference is 0.1% of pulley mass.
  · Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
  [Applications]
  · Fans, etc.

  2D / 3D CAD data available

  Starting from∗ ：	54.37 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  JIS V-Pulley A Series

  NABEYA BI-TECH

  Highest quality pulley, with materials together with machining and balance accuracy exceeding JIS standards.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway, and set screw machining standardized.
  · Easy set-up
  · A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JISB1854-1987 "General use V-pulley")
  · Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.
  · Surface treatment, for improving corrosion resistance is a electrodeposition coating with beautiful finish.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	14.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Wedge Pulley

  NABEYA BI-TECH

  High-speed, high power transmission V-belt pulley that conforms with JIS B 1855.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.
  · Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.
  · 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").
  · Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass.
  [Applications]
  · Fans, etc.

  2D / 3D CAD data available

  Starting from∗ ：	16.74 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Variable Speed Pulley

  NABEYA BI-TECH

  Fine rotation ratio adjustment. Simple structure, precision machining. No rattling due to micro vibrations / shock loads.

  2D / 3D CAD data available

  Starting from∗ ：	74.34 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  JIS V-Pulley, D Type

  NABEYA BI-TECH

  Full lineup of V-belt pulleys that conform to JIS B 1854.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Shaft hole, keyway and push screw machining standardized.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
  · Imbalance tolerance on outer circumference is 0.1% of pulley mass.
  · Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
  [Applications]
  · Fans, etc.

  2D / 3D CAD data available

  Starting from∗ ：	712.96 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  VMG Groove Gauge for V-Pulley

  NABEYA BI-TECH

  Gauge for checking wear of pulley V-groove part. Orders can be made for individual shapes, or as a set for each groove shape. A gap has been provided between the gauge and the outer circumference of the pulley and the bottom of the V-groove. Early replacement is recommended for transmission efficiency.

  Starting from∗ ：	82.01 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Continuously Variable Transmission (Hagino Type)_W / L

  NABEYA BI-TECH

  [Features]
  · Rotation has continuously variable speed.
  · In the hagino type CVT, by placing a speed change pulley on the intermediate shaft and changing the position thereof, the rotational speed of the pulley on the driven side is changed utilizing the tension balance of the belt, allowing continuously variable transmission.
  · Alignment is automatically adjusted.
  · Both side disks and middle disks move freely on the shaft.
  · Alignment with the driving side pulley and the driven side pulley is automatically adjusted.
  · For this reason, the center of the belt is always held, and the belt is not strained.

  2D / 3D CAD data available

  Starting from∗ ：	219.70 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  ISOMEC Bushing / Bolt-on Hub

  NABEYA BI-TECH

  ISOMEC bushing can be used simply by connecting a bolt to the rotating body.

  Starting from∗ ：	68.69 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Vankin Pulley VK

  NABEYA BI-TECH

  Lightweight V-belt pulley made of sheet metal.
  [Features]
  · Rotation molding method imparts a rigidity suitable for light/moderate load transmission in general industrial machinery.
  · Pulley grooves are rounded with no sharp corners to avoid damage to the belt.
  · Lightweight, so the entire machine, including base, pillow block, etc., can be made lighter and more compact.
  [Applications]
  · Fans, etc.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	14.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ISOMEC Bushing / Adapter

  NABEYA BI-TECH

  ISOMEC bushing can be used simply by machining a straight hole into the rotating body.

  Starting from∗ ：	50.31 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

Loading...