Registrace

Překládáme náš obchod do češtiny! 

Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Kategorie
Zobrazit další
Podmínky filtrování

Vymazat vše

OKAZAKI SEIKO Carbide Square End Mills

42 položek
* Informace o dnech dodání, přepravních nákladech a cenách
Seznam
Fotografie
Porovnat specifikace
  • 1
    • SED2LA Long Square End Mill, 2-Flute, OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SED2LA Long Square End Mill, 2-Flute, OK Coated

      SED2LA, Long square end mill, 2-flute, OK coating-The long design enables milling of deep cavities-Sharp helix angle (45 to 60°).
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]15 ～ 802Long-Neck SquareTiAlN6 ～ 2070 ～ 150-
      Cena (bez DPH) od:
      86.26 €
      Cena včetně DPH:
      102.65 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SED2M Medium Square End Mill, 2-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SED2M Medium Square End Mill, 2-Flute, Non-Coated

      A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ～ 12General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ～ 362SquareNon-Coated4 ～ 1245 ～ 75-
      Cena (bez DPH) od:
      33.40 €
      Cena včetně DPH:
      39.75 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated

      The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]15 ～ 804High HelicalTiAlN6 ～ 2070 ～ 150-
      Cena (bez DPH) od:
      95.41 €
      Cena včetně DPH:
      113.54 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated

      [Features] Slim carbide end mill with 4 cutting edges.Resists chipping and can be used in a wide range of applications, from general steel to stainless steel.The slim shank design allows flexible adjustment of projection length.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      5 ～ 22General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]8 ～ 324High HelicalNon-Coated4 ～ 2070 ～ 150-
      Cena (bez DPH) od:
      75.07 €
      Cena včetně DPH:
      89.33 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • BED2 Brazed Square End Mill, 2-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      BED2 Brazed Square End Mill, 2-Flute, Non-Coated

      Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      20 ～ 50General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]32 ～ 632SquareNon-Coated20 ～ 42115 ～ 160-
      Cena (bez DPH) od:
      156.14 €
      Cena včetně DPH:
      185.81 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • BPD4 Brazed Square End Mill, 4-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      BPD4 Brazed Square End Mill, 4-Flute, Non-Coated

      Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      20 ～ 50General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]32 ～ 634SquareNon-Coated20 ～ 42115 ～ 160-
      Cena (bez DPH) od:
      238.54 €
      Cena včetně DPH:
      283.86 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • BED2L Brazed Long Square End Mill, 2-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      BED2L Brazed Long Square End Mill, 2-Flute, Non-Coated

      Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      20 ～ 50General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]55 ～ 1252Long-Neck SquareNon-Coated20 ～ 42140 ～ 240-
      Cena (bez DPH) od:
      308.14 €
      Cena včetně DPH:
      366.69 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • BPD4L Brazed Long Square End Mill, 4-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      BPD4L Brazed Long Square End Mill, 4-Flute, Non-Coated

      Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      20 ～ 50General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]55 ～ 1254Long-Neck SquareNon-Coated20 ～ 42140 ～ 240-
      Cena (bez DPH) od:
      347.22 €
      Cena včetně DPH:
      413.19 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • BPD4U Brazed Extra-Long Square End Mill, 4-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      BPD4U Brazed Extra-Long Square End Mill, 4-Flute, Non-Coated

      Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      20 ～ 50General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]85 ～ 1504Long-Neck SquareNon-Coated25 ～ 42185 ～ 265-
      Cena (bez DPH) od:
      477.19 €
      Cena včetně DPH:
      567.86 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SAD2 Square End Mill for Aluminium, 2-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SAD2 Square End Mill for Aluminium, 2-Flute, Non-Coated

      Endmill for aluminum with sharp corners and a blade for aluminum.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ～ 12Aluminum[◎] / Copper[○]3 ～ 322SquareNon-Coated4 ～ 1245 ～ 75-
      Cena (bez DPH) od:
      34.41 €
      Cena včetně DPH:
      40.95 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SAD2D Square End Mill for Aluminium, 2-Flute, Pure DLC-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SAD2D Square End Mill for Aluminium, 2-Flute, Pure DLC-Coated

      The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ～ 12Aluminum[◎] / Copper[◎]3 ～ 322SquareDLC4 ～ 1245 ～ 75-
      Cena (bez DPH) od:
      55.76 €
      Cena včetně DPH:
      66.35 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SAE3 High-Helix End Mill for Aluminium, 3-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SAE3 High-Helix End Mill for Aluminium, 3-Flute, Non-Coated

      High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20Aluminum[◎] / Copper[○]10 ～ 453High HelicalNon-Coated6 ～ 2045 ～ 105-
      Cena (bez DPH) od:
      50.67 €
      Cena včetně DPH:
      60.30 €
      Běžné datum odeslání:
      8 pracovních dnů
      Konfigurovat
    • SAE3D High-Helix End Mill for Aluminium, 3-Flute, Pure DLC-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SAE3D High-Helix End Mill for Aluminium, 3-Flute, Pure DLC-Coated

      The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20Aluminum[◎] / Copper[◎]10 ～ 453High HelicalDLC6 ～ 2045 ～ 105-
      Cena (bez DPH) od:
      82.18 €
      Cena včetně DPH:
      97.79 €
      Běžné datum odeslání:
      8 pracovních dnů
      Konfigurovat
    • SAE3L Long High-Helix End Mill for Aluminium, 3-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SAE3L Long High-Helix End Mill for Aluminium, 3-Flute, Non-Coated

      A long shank type, it also features neck relief, enabling deep engraving operation.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20Aluminum[◎] / Copper[○]10 ～ 453High HelicalNon-Coated6 ～ 2070 ～ 80015 ～ 80
      Cena (bez DPH) od:
      71.01 €
      Cena včetně DPH:
      84.50 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SAE3LD Long High-Helix End Mill for Aluminium, 3-Flute, Pure DLC-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SAE3LD Long High-Helix End Mill for Aluminium, 3-Flute, Pure DLC-Coated

      Long high helical endmill for aluminum, 3-flute, pure DLC coating
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20Aluminum[◎] / Copper[◎]10 ～ 453High HelicalDLC6 ～ 2070 ～ 80015 ～ 80
      Cena (bez DPH) od:
      110.69 €
      Cena včetně DPH:
      131.72 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SED2 Square End Mill, 2-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SED2 Square End Mill, 2-Flute, Non-Coated

      An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.4 ～ 32General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1 ～ 552SquareNon-Coated4 ～ 3245 ～ 130-
      Cena (bez DPH) od:
      33.40 €
      Cena včetně DPH:
      39.75 €
      Běžné datum odeslání:
      7 pracovních dnů
      Konfigurovat
    • SED2L Long Square End Mill, 2-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SED2L Long Square End Mill, 2-Flute, Non-Coated

      SED2L, Long square end mill, 2-flute, uncoated-The long design enables milling of deep cavities.-Sharp helix angle (45 to 60°).
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]15 ～ 802Long-Neck SquareNon-Coated6 ～ 2070 ～ 150-
      Cena (bez DPH) od:
      63.88 €
      Cena včetně DPH:
      76.02 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • SED2MA Medium Square End Mill, 2-Flute, OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SED2MA Medium Square End Mill, 2-Flute, OK Coated

      A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ～ 12General Steel[◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]4 ～ 362SquareTiAlN4 ～ 1245 ～ 75-
      Cena (bez DPH) od:
      48.65 €
      Cena včetně DPH:
      57.89 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SED4 Square End Mill, 4-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SED4 Square End Mill, 4-Flute, Non-Coated

      An end mill with an abundant range of blade diameters which can be used for machining non-ferrous materials through to steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ～ 32General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]6 ～ 554SquareNon-Coated4 ～ 3245 ～ 130-
      Cena (bez DPH) od:
      33.40 €
      Cena včetně DPH:
      39.75 €
      Běžné datum odeslání:
      7 pracovních dnů
      Konfigurovat
    • SED4A Square End Mill, 4-Flute, OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SED4A Square End Mill, 4-Flute, OK Coated

      A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ～ 32General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]6 ～ 554SquareTiAlN4 ～ 3245 ～ 130-
      Cena (bez DPH) od:
      48.65 €
      Cena včetně DPH:
      57.89 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • SED4MA Medium Square End Mill, 4-Flute, OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SED4MA Medium Square End Mill, 4-Flute, OK Coated

      A 4-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]12 ～ 364SquareTiAlN6 ～ 1245 ～ 75-
      Cena (bez DPH) od:
      52.71 €
      Cena včetně DPH:
      62.72 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SEE3 High-Helix End Mill, 3-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SEE3 High-Helix End Mill, 3-Flute, Non-Coated

      3-flute type with high-torsion grooves enables everything from rough machining to finishing
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]10 ～ 453High HelicalNon-Coated6 ～ 2045 ～ 105-
      Cena (bez DPH) od:
      45.60 €
      Cena včetně DPH:
      54.26 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SEE4 High-Helix End Mill, 4-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SEE4 High-Helix End Mill, 4-Flute, Non-Coated

      An end mill with a high-torsion blade that reduces cutting resistance, which can be used for machining non-ferrous materials through to steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 25General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]10 ～ 504High HelicalNon-Coated6 ～ 2545 ～ 120-
      Cena (bez DPH) od:
      45.60 €
      Cena včetně DPH:
      54.26 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated
      • Volume Discount

      OKAZAKI SEIKO

      SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

      End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]10 ～ 454High HelicalFor High Hardness (Silicon Group)6 ～ 2045 ～ 105-
      Cena (bez DPH) od:
      49.66 €
      Cena včetně DPH:
      59.10 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated

      The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]15 ～ 804High HelicalNon-Coated6 ～ 2070 ～ 150-
      Cena (bez DPH) od:
      71.01 €
      Cena včetně DPH:
      84.50 €
      Běžné datum odeslání:
      7 pracovních dnů
      Konfigurovat
    • SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated

      The reverse step design eliminates shank interference when performing mold pocket processing.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      5 ～ 22General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]8 ～ 324High HelicalTiAlN4 ～ 2070 ～ 150-
      Cena (bez DPH) od:
      99.47 €
      Cena včetně DPH:
      118.37 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated
      • Volume Discount

      OKAZAKI SEIKO

      SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated

      Unique blade type and OK hard coating enable high speed machining of high hardness materials up to 65 HRC.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 20General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]15 ～ 456SquareFor High Hardness (Silicon Group)6 ～ 2050 ～ 105-
      Cena (bez DPH) od:
      87.27 €
      Cena včetně DPH:
      103.85 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated
      • Volume Discount

      OKAZAKI SEIKO

      SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated

      Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 20General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]15 ～ 456SquareFor High Hardness (Silicon Group)6 ～ 2080 ～ 150-
      Cena (bez DPH) od:
      108.56 €
      Cena včetně DPH:
      129.19 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SPSED2A SP Series Square End Mill 2-Flute OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SPSED2A SP Series Square End Mill 2-Flute OK Coated

      A 2-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ～ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]2.5 ～ 452SquareTiAlN4 ～ 2545 ～ 120-
      Cena (bez DPH) od:
      15.09 €
      Cena včetně DPH:
      17.96 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • SPSED4A SP Series Square End Mill 4-Flute OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SPSED4A SP Series Square End Mill 4-Flute OK Coated

      A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      5 ～ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]15 ～ 254SquareTiAlN6 ～ 1250 ～ 75-
      Cena (bez DPH) od:
      25.26 €
      Cena včetně DPH:
      30.06 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

      A multi-purpose 3-flute high torsion end mill with support from rough machining to finish machining.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]10 ～ 453High HelicalTiAlN6 ～ 2045 ～ 105-
      Cena (bez DPH) od:
      23.22 €
      Cena včetně DPH:
      27.63 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated

      It is a high-torsion blade that reduces cutting resistance, realizing a finished surface with low tilt.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]10 ～ 504High HelicalTiAlN6 ～ 2545 ～ 120-
      Cena (bez DPH) od:
      23.22 €
      Cena včetně DPH:
      27.63 €
      Běžné datum odeslání:
      7 pracovních dnů
      Konfigurovat
    • SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat
      • Volume Discount

      OKAZAKI SEIKO

      SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat

      Its unique roughing shape and the effect of OK coating enable heavy cutting and high speed machining.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      5 ～ 25General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]12 ～ 454RoughingTiAlN4 ～ 2550 ～ 120-
      Cena (bez DPH) od:
      72.02 €
      Cena včetně DPH:
      85.70 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • SRE3 Roughing End Mill for Aluminium, 3-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SRE3 Roughing End Mill for Aluminium, 3-Flute, Non-Coated

      High torsion roughing endmill ideal for roughing aluminum material.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 20Aluminum[◎] / Copper[○]15 ～ 453RoughingNon-Coated6 ～ 2050 ～ 105-
      Cena (bez DPH) od:
      112.82 €
      Cena včetně DPH:
      134.26 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SRE3D Roughing End Mill for Aluminium, 3-Flute, Pure DLC-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SRE3D Roughing End Mill for Aluminium, 3-Flute, Pure DLC-Coated

      The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 20Aluminum[◎] / Copper[◎]15 ～ 453RoughingDLC6 ～ 2050 ～ 105-
      Cena (bez DPH) od:
      129.87 €
      Cena včetně DPH:
      154.55 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SPSEE3ZA SP Series Roughing Mill 3 Flutes / OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SPSEE3ZA SP Series Roughing Mill 3 Flutes / OK Coated

      A non-stepped vertical feed reinforced end mill that enables vertical feeding going straight on to grooving.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ～ 20General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]4 ～ 403SquareTiAlN4 ～ 2045 ～ 105-
      Cena (bez DPH) od:
      24.25 €
      Cena včetně DPH:
      28.86 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • SPSEE4GA SP Series Steel Power Mill 4 Flutes / OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SPSEE4GA SP Series Steel Power Mill 4 Flutes / OK Coated

      End mill with a unique reinforced blade type with good chip discharge properties that enables heavy duty cutting and high speed machining.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]10 ～ 454SquareTiAlN6 ～ 2045 ～ 105-
      Cena (bez DPH) od:
      29.32 €
      Cena včetně DPH:
      34.89 €
      Běžné datum odeslání:
      8 pracovních dnů
      Konfigurovat
    • SPSRD3ZA SP Series Roughing Mill 3 Flutes / OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SPSRD3ZA SP Series Roughing Mill 3 Flutes / OK Coated

      A multi-purpose roughing end mill with the enhanced vertical feed performance of the Zakkuri Mill.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      5 ～ 20General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]12 ～ 403RoughingTiAlN6 ～ 2050 ～ 10515 ～ 36
      Cena (bez DPH) od:
      74.06 €
      Cena včetně DPH:
      88.13 €
      Běžné datum odeslání:
      8 pracovních dnů
      Konfigurovat
    • SEE4VH 4 Flutes
      • Volume Discount

      OKAZAKI SEIKO

      SEE4VH 4 Flutes

      Endmill with a variable division shape which greatly reduces chattering. The OK hard coating enables machining of high-hardness materials.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 20Quenched and tempered steel[○]10 ～ 454SquareFor High Hardness (Silicon Group)6 ～ 2045 ～ 10513 ～ 55
      Cena (bez DPH) od:
      49.66 €
      Cena včetně DPH:
      59.10 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA
      • Volume Discount

      OKAZAKI SEIKO

      Zakkuri Mill (with Slim Shank) 3-Flute / OK Coat Premium SEE3ZTA

      [Features]· Carbide end mills for plunge milling that enable non-step plunge cut feed, and further fluting as is.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      18General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]--High HelicalTiAlN---
      Cena (bez DPH) od:
      84.22 €
      Cena včetně DPH:
      100.22 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SP Series Vibration-Proof Mill 4-Flute / OK Coat Premium SPSEE4VA
      • Volume Discount

      OKAZAKI SEIKO

      SP Series Vibration-Proof Mill 4-Flute / OK Coat Premium SPSEE4VA

      [Features]End mills that can drastically reduce chattering thanks to their unequally divided shape.
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      -General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]-4SquareTiAlN---
      Cena (bez DPH) od:
      26.27 €
      Cena včetně DPH:
      31.26 €
      Běžné datum odeslání:
      8 pracovních dnů
      Konfigurovat
    • Go-riki Roughing End Mill 4-Flute / OK Coat Premium SRE4GA
      • Volume Discount

      OKAZAKI SEIKO

      Go-riki Roughing End Mill 4-Flute / OK Coat Premium SRE4GA

      [Features]· Reduced cutting resistance and enhanced durability thanks to the synergistic effect of its unique vibration damping structure and OK coat
      Více informací
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      -General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]-4RoughingTiAlN---
      Cena (bez DPH) od:
      101.46 €
      Cena včetně DPH:
      120.74 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
  • 1

    • Kategorie související s Carbide Square End Mills