OMRON PLC (Input/Output Units)（Representative Standard：CSA）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
NX Series Position Interface Pulse Output Unit NX-PG0□□□
OMRON
Positioning control with pulse outputs to command stepper motor drives and other pulse input motor drives
■ Features
· The MC Function Module of the NJ/NX/NY5 Controller allows you to
connect with as many axes as the NJ/NX/NY5 Controller can control
· High-speed remote I/O control with communications cycle as fast as 125 μs*1
· Multiple stepping motors and servo motors can be operated in synchronization by
using synchronous I/O refreshing or task period prioritized refreshing*2
· Latching (2 external latch inputs)
· Open collector pulse outputs up to 500 kHz
or line driver pulse outputs up to 4 MHz
· Line driver output models with 2 or 4 channels
*1 When using the NX-EC01□□ together with the NX701-□□□□ and NX-ECC203.
* *2 Task period prioritized refreshing is available when the NX-ECC203 is used together.Starting from∗ ： 463.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 371.47 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Programmable Controller CP1L Expansion I / O Unit
OMRON
Programmable Controller CP1L Expansion I/O UnitStarting from∗ ： 359.07 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NX Series Digital Output Unit NX-OD Transistor Output Unit
OMRON
Digital output unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
■ Features
· Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
· Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
· Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time stamping input method,
and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
controller's control period
· The use of a removable terminal block improves system maintainability
· The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
greatly reduce the time required for wiring work
· A unit width of only 12 mm realizes space saving (connector type 30 mm)
· 2-, 4-, 8-, 16- and 32-output-contact types are available, enabling the I/O configuration that best suits your equipment
· Connect to the CJ Series using the EtherNet/IP couplerStarting from∗ ： 136.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,402.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 318.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 806.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 784.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 371.47 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 1,318.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 2,193.33 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 628.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 445.60 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NX Series Digital Output Unit NX-OC Relay Output Unit
OMRON
Digital output unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
■ Features
· Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
· Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
· Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time stamping input method,
and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
controller's control period
· The use of a removable terminal block improves system maintainability
· The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
greatly reduce the time required for wiring work
· A unit width of only 12 mm realizes space saving (connector type 30 mm)
· 2-, 4-, 8-, 16- and 32-output-contact types are available, enabling the I/O configuration that best suits your equipment
· Connect to the CJ Series using the EtherNet/IP couplerStarting from∗ ： 134.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX Series Digital Input Unit NX-ID DC Input Unit
OMRON
Digital input unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
■ Features
· Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
· Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
· Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time-stamping input method,
and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
controller's control period
· The use of a removable terminal block improves system maintainability
· The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
greatly reduce the time required for wiring work
· A unit width of only 12 mm realizes space saving (connector type 30 mm)
· 4-, 8-, 16- and 32-input-contact types are available, enabling the I/O configuration that best suits your equipment
· Connect to the CJ Series using the EtherNet/IP coupler- Volume Discount
Starting from∗ ： 163.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NX Series Incremental Encoder Input Unit NX-EC0□□□
OMRON
Enables more precise timing control by synchronizing the encoder data with the time data
■ Features
· Open-collector-output type and line-driver-output type incremental encoders can be connected
· High-speed remote I/O control with communications cycle as fast as 125 μs*1
· Free-run refreshing, synchronous I/O refreshing, or
task period prioritized refreshing*2 with the NX1P2 CPU Unit or EtherCAT Coupler Unit
· The MC Function Module of the NJ/NX/NY5 Controllers allows the encoder
to be used as a motion axis
· Latching (1 internal signal and 2 input signals from external devices)
· Pulse period measurement
· 32-bit counters (80000000 to 7FFFFFFF HEX)
· Maximum counting rate: 4 MHz (Line receiver: 4 MHz; Open collector: 500 kHz)
· Time stamping
· Maximum and minimum counter value setting
· Connect to the CJ PLC using the EtherNet/IP coupler
*1 When using the NX-EC01□□ together with the NX701-□□□□ and NX-ECC203.
*2 Task period prioritized refreshing is available when the NX-ECC203 is used together.Starting from∗ ： 575.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Number Of Inputs |
| Input Format |
| Rated Input Voltage(V) |
| Number of Outputs |
| Output Format |
| Rated load voltage(V) |
| Protection function |
| Connection Terminal |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON |
| Product Series | ||||||||||||||||
| Starting from∗ | 463.67 € *Unit price with basic configuration | 371.47 € *Unit price with basic configuration | 359.07 € *Unit price with basic configuration | 136.54 € *Unit price with basic configuration | 1,402.67 € *Unit price with basic configuration | 318.67 € *Unit price with basic configuration | 806.67 € *Unit price with basic configuration | 784.67 € *Unit price with basic configuration | 371.47 € *Unit price with basic configuration | 1,318.00 € *Unit price with basic configuration | 2,193.33 € *Unit price with basic configuration | 628.00 € *Unit price with basic configuration | 445.60 € *Unit price with basic configuration | 134.87 € *Unit price with basic configuration | 163.21 € *Unit price with basic configuration | 575.70 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 7 Days | 7 Days | 6 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 6 Days | 6 Days | 6 Days |
| Number Of Inputs | 32 | 8 ～ 64 | 8 ～ 12 | - | - | 1 ～ 8 | 16 | 16 ～ 32 | - | - | - | 16 ～ 96 | 10 | - | 16 | - |
| Input Format | DC input / Other | AC input | DC input | - | - | DC input | - | - | - | - | - | DC input / AC input / AC/DC input | - | - | DC input | Other |
| Rated Input Voltage(V) | 24 | 24 ～ 200 to 240 | - | - | - | 12–24 | 24 | 5 ～ 24 | - | - | - | 24 ～ 200 to 240 | - | - | 24 | - |
| Number of Outputs | - | - | 8 | 32 | - | 1 | - | 16 ～ 32 | 8 ～ 64 | - | - | 8 ～ 96 | 6 | - | - | - |
| Output Format | Other | - | Relay contact output / Transistor / source output / Transistor / sync output | Other | - | - | - | Transistor / source output / Transistor / sync output | Relay contact output / Triac output / Transistor / source output / Transistor / sync output | - | - | Relay contact output / Triac output / Transistor / source output / Transistor / sync output | Transistor / sync output | Relay contact output | - | Other |
| Rated load voltage(V) | - | - | - | - | - | 5 | - | - | - | - | - | - | - | - | - | - |
| Protection function | - | - | - | - | - | - | - | - | Output protection function | - | - | - | - | - | - | - |
| Connection Terminal | Terminal Block / Connector | - | Terminal Block | Terminal Block | - | Terminal Block / Connector | - | - | - | - | - | Terminal Block / Connector | - | Terminal Block | Terminal Block / Connector | Terminal Block |
| Representative Standard | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA | CSA |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Number Of Inputs
-
Input Format
- DC input
- AC input
- AC/DC input
- Other
-
Rated Input Voltage(V)
-
Number of Outputs
-
Output Format
- Relay contact output
- Triac output
- Transistor / source output
- Transistor / sync output
- Other
-
Rated load voltage(V)
-
Protection function
- None
- Output protection function
- Other
-
Connection Terminal
- Terminal Block
- Connector
-
Representative Standard
- CE
- UL
- CUL
- TUV
- CSA
- Other
Narrow search by specifying Brand
-
- OMRON (16)
- WATANABE ELECTRIC INDUSTRY (0)
- PHOENIX CONTACT (0)
- SIEMENS (0)
- IFM ELECTRONIC (0)
- EATON (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to PLC (Input/Output Units)
-
- PLC (CPU Units)
- PLC (Power Supply Units)
- PLC (Base Units)
- PLC (Software, Manuals)
- PLC Compatible Cables
- PLC Compatible Batteries
- PLC (Options, Others)
- PLC (Communication Units)
- PLC (Input/Output Units)
- PLC (Analog Units)
- PLC (Memory Units)
- PLC (Motion Controllers)
- PLC (Control Units)
- PLC (Wire-Saving Dedicated Units)
-
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.