Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
OSG Screw-Hole-Related Tools（Hole type：For blind hole）
Hand Taps (11)
Spiral Taps (29)
Point Taps (1)
Roll Taps (19)
Taps for Pipes (38)
Thread Cutters (6)
Thread-Cutting-Related Tools (2)
Dies
Modification/Removal Tools (1)
107 položek
* Informace o dnech dodání, přepravních nákladech a cenách
- SLEVA
- Volume Discount
OSG
A Tap Series, Spiral Tap, A-SFT
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified 1-8UNC ～ M56 0.25 ～ 5.5 1.5P ～ 2.5P Powder high-speed steel / Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:16.04 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- SLEVA
- Volume Discount
OSG
Taper Tap Series for Pipes General Applications TPT
For use when machining tapered female threads for pipes. Long threaded type used primarily for connecting pipe-shaped itemsVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R7/8 11 ～ 28 2.5P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Tap for pipes For blind hole N/A KonfigurovatCena (bez DPH) od:17.00 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- SLEVA
- Volume Discount
- Stock
OSG
Spiral Tap Series, General Purpose EX-SFT
Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified 1UN ～ M56 0.25 ～ 48 2.5P ～ 3P Vanadium High-Speed Steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:7.97 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- Volume Discount
OSG
Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT
Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the SurfaceVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 2.5P ～ 5P Powder high-speed steel Quenched and tempered steel (45 to 55 HRC)[◎] Hand Tap For blind hole Available KonfigurovatCena (bez DPH) od:26.47 €Cena včetně DPH:31.50 €Běžné datum odeslání:8 pracovních dnů
- SLEVA
- Volume Discount
OSG
Groove-Free Tap Series, Tin Coated, TIN-NRT
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified No0UN ～ M20 0.25 ～ 80 2P ～ 4P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Roll tap For blind hole Available KonfigurovatCena (bez DPH) od:17.52 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- SLEVA
- Volume Discount
OSG
Groove-Free Tap Series X Performer S-XPF
When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts * M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M1 ～ M45 0.2 ～ 4.5 2P ～ 4P Powder high-speed steel / Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] Roll tap For blind hole Available KonfigurovatCena (bez DPH) od:19.66 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
OSG
Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M20 0.5 ～ 2.5 1.5P ～ 3P Carbide Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] Hand Tap For blind hole N/A KonfigurovatCena (bez DPH) od:88.83 €Cena včetně DPH:105.71 €Běžné datum odeslání:6 pracovních dnů
OSG
Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT
Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) TappingVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M20 0.4 ～ 2.5 3P Carbide High Hardness Steel (50-60 HRC)[◎] Hand Tap For blind hole Available KonfigurovatCena (bez DPH) od:83.15 €Cena včetně DPH:98.95 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT
Allows internal threading of stainless steel with a water soluble cutting fluid.Tool material: Vanadium high speed steelHole type: For blind holesMaterial: General steel/stainless steel.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M24 0.4 ～ 3 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:17.56 €Cena včetně DPH:20.90 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, for Stainless EX-SUS-SFT
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified / Whitworth 1UN ～ M42 0.4 ～ 48 2.5P ～ 3P Vanadium High-Speed Steel Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:8.81 €Cena včetně DPH:10.48 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT
Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tapVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M36 0.4 ～ 4 2.5P Vanadium High-Speed Steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:14.47 €Cena včetně DPH:17.22 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spatter Removal Tap Series, for Female Thread Repair / Removal of Weld Spatters, SR-HT
Ideal for removing weld spatter and cutting chips inside the internal thread.Tool material: vanadium high-speed steelCoating: surface treatment, uncoatedNumber of threads on chamfer: 5PAccuracy (grade) 0.06Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M5 ～ M12 0.8 ～ 1.25 5P Vanadium High-Speed Steel - Modification/removal Tool For blind hole N/A KonfigurovatCena (bez DPH) od:8.39 €Cena včetně DPH:9.98 €Běžné datum odeslání:6 pracovních dnů
- SLEVA
- Volume Discount
OSG
Hand Tap Series, for Difficult-to-Machine Material, CPM-HT
Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forgingVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M48 0.5 ～ 5 2P ～ 5P Powder high-speed steel High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] Hand Tap For blind hole N/A KonfigurovatCena (bez DPH) od:11.08 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
OSG
Taper Tap Series for Pipes Spiral Fluted SFT-TPT
It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] Tap for pipes For blind hole N/A KonfigurovatCena (bez DPH) od:24.17 €Cena včetně DPH:28.76 €Běžné datum odeslání:6 pracovních dnů
- SLEVA
- Volume Discount
OSG
Parallel Tap Series for Pipes General Applications SPT
For use when machining parallel female pipe taper threads and female pipe parallel threadsVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes G1 ～ G7/8 11 ～ 28 1.5P ～ 4P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For blind hole N/A KonfigurovatCena (bez DPH) od:14.96 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- Volume Discount
OSG
Groove-Free Tap Series VP New Roll VP-NRT
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified M1 ～ M12 0.25 ～ 56 2P ～ 4P Powder high-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] Roll tap For blind hole Available KonfigurovatBěžné datum odeslání:6 pracovních dnů
OSG
Taper Tap Series for Pipes TIN Coated Short Screws Long Shank TIN-LT-S-TPT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe Rc1/2 ～ Rc3/8 14 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For blind hole Available KonfigurovatCena (bez DPH) od:53.57 €Cena včetně DPH:63.75 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, High-Speed Synchronized Tap for Aluminium, HS-AL-SFT
Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M6 0.4 ～ 1 3P Vanadium High-Speed Steel Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:13.15 €Cena včetně DPH:15.65 €Běžné datum odeslání:6 pracovních dnů
- SLEVA
- Volume Discount
OSG
Spiral Tap Series, Short Chamfer Type, EX-SC-SFT
Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per InchVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M1 ～ M30 0.25 ～ 3.5 1.5P Vanadium High-Speed Steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:8.69 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
OSG
Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT
Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M10 0.5 ～ 1.5 3P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:32.98 €Cena včetně DPH:39.25 €Běžné datum odeslání:6 pracovních dnů
OSG
Spiral Tap Series, Carbide Spiral Tap OT-SFT
Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machineVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 1.5P ～ 2.5P Carbide Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:72.40 €Cena včetně DPH:86.16 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Planet Cutter Series NC-Planet Cutters WX-PNC
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified / Taper for Pipe - 1 ～ 28 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] Thread cutter For blind hole Available KonfigurovatCena (bez DPH) od:158.30 €Cena včetně DPH:188.38 €Běžné datum odeslání:6 pracovních dnů
OSG
Taper Tap Series for Pipes Spiral Fluted for Stainless Steel SUS-SFT-TPT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe G1/2 ～ G3/8 14 ～ 28 2.5P Vanadium High-Speed Steel Stainless Steel (JIS-SUS)[◎] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:29.78 €Cena včetně DPH:35.44 €Běžné datum odeslání:6 pracovních dnů
OSG
Taper Tap Series for Pipes Short Screws for Stainless EX-SUS-S-TPT
This is a short thread type used for machining tapered internal threads in pipes. It is suitable for hard-to-cut materials such as stainless steel.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Carbide Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Tap for pipes For blind hole N/A KonfigurovatCena (bez DPH) od:25.37 €Cena včetně DPH:30.19 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Parallel Tap Series for Pipes New Roll Tap NRT-SPT
[Features] A new thread former with overall lengths of 65 mm and 80 mm.[Features] It can be used for side mounting of pipe screws and deep hole machining.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes PF3/8 19 2.5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] Tap for pipes For blind hole N/A KonfigurovatCena (bez DPH) od:55.97 €Cena včetně DPH:66.60 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Groove-Free Tap Series IT New Roll IT-NRT
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified M1 ～ No4UN 0.25 ～ 56 2P Powder high-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] Roll tap For blind hole Available KonfigurovatCena (bez DPH) od:19.82 €Cena včetně DPH:23.59 €Běžné datum odeslání:6 pracovních dnů
- SLEVA
- Volume Discount
OSG
Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified M1 ～ No6UN 0.25 ～ 56 1P Powder high-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] Roll tap For blind hole Available KonfigurovatCena (bez DPH) od:19.89 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
OSG
Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified M1 ～ M12 0.25 ～ 56 2P ～ 4P Powder high-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] Roll tap For blind hole Available KonfigurovatCena (bez DPH) od:24.43 €Cena včetně DPH:29.07 €Běžné datum odeslání:6 pracovních dnů
OSG
Taper Tap Series for American Pipes for General Application (NPSF) SPT
Used for machining of parallel female pipe taper threads and female pipe parallel threadsVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes NPS1/16 27 4P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For blind hole N/A KonfigurovatCena (bez DPH) od:30.94 €Cena včetně DPH:36.82 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Machining Center Tap Series, Short Type for Machining Centers, EX-S-MCT
With horizontal machining center, biting that is prone to chipping is easily controlled so the stable performance can be obtained.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 1.25 3P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Thread-Cutting-Related Tool For blind hole N/A KonfigurovatCena (bez DPH) od:12.91 €Cena včetně DPH:15.36 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, General Purpose Sewing Machine (SM) Screw, EX-SFT-SM
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Sewing Machine SM1/4 ～ SM15/64 20 ～ 56 2.5P Vanadium High-Speed Steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:10.88 €Cena včetně DPH:12.95 €Běžné datum odeslání:6 pracovních dnů
OSG
A Tap Series, Spiral Tap, Long Shank A-LT-SFT
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M24 0.25 ～ 3 2.5P Powder high-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:24.50 €Cena včetně DPH:29.16 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole MarginVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified - 0.25 ～ 32 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available KonfigurovatCena (bez DPH) od:101.50 €Cena včetně DPH:120.78 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT
Suitable for threading hardened steel up to 55 HRC.Material: High hardness steel up to 55 HRCFor coating / surface treatment / steelAccuracy (class) OH3Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 2.5P ～ 5P Carbide Quenched and tempered steel (45 to 55 HRC)[◎] Hand Tap For blind hole Available KonfigurovatCena (bez DPH) od:83.34 €Cena včetně DPH:99.17 €Běžné datum odeslání:6 pracovních dnů
OSG
Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT
In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 1.25 5P Powder high-speed steel Nickel-based alloy (Inconel, etc.)[◎] Point tap For blind hole Available KonfigurovatCena (bez DPH) od:28.34 €Cena včetně DPH:33.72 €Běžné datum odeslání:6 pracovních dnů
OSG
Insert Screw Tap Series, New Roll Tap for Non-Irons, Long Shank, HL-LT-B-NRT
When cutting aluminum (cast, rolled and forged) and other light alloys, this is suitable as a countermeasure for obstruction from metal shavings, or when the objective is extending the tap usage life.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 1.25 2P High-speed steel Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] Roll tap For blind hole Available KonfigurovatCena (bez DPH) od:42.36 €Cena včetně DPH:50.41 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Insert Screw Tap Series, Hand Tap HL-HT
Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Unified No8UN 32 5P High-speed steel Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] Hand Tap For blind hole N/A KonfigurovatCena (bez DPH) od:12.11 €Cena včetně DPH:14.41 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, Tin Coated, TIN-SFT
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M1.4 ～ M16 0.3 ～ 2 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:16.04 €Cena včetně DPH:19.09 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M16 0.5 ～ 2 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:23.77 €Cena včetně DPH:28.29 €Běžné datum odeslání:6 pracovních dnů
OSG
Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT
Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.Tool material: Powder metal high-speed steelThread type: MetricHole type: For blind holesMaterial: General steel / heat-treated steelCoating: Surface treatment for steel.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 2.5P Powder high-speed steel High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:17.33 €Cena včetně DPH:20.62 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, V Coated, V-SFT
Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M16 0.5 ～ 2 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:17.63 €Cena včetně DPH:20.98 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, for Aluminium, EX-AL-SFT
Suitable for tapping blind hole of nonferrous metal such as aluminum and its alloys, and die-castVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 1 2.5P Vanadium High-Speed Steel Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:15.96 €Cena včetně DPH:18.99 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT
Ideal for deep hole drilling of stainless steel beyond 2D.Working material: Stainless steel / copper / resinCoating: Surface treatment, steam oxide treatment.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2.6 ～ M10 0.45 ～ 1.5 2.5P Vanadium High-Speed Steel Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:10.88 €Cena včetně DPH:12.95 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M24 0.5 ～ 3 2.5P Vanadium High-Speed Steel Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:14.52 €Cena včetně DPH:17.28 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, Low Spiral LW-SFT
Debris is chopped into fine pieces and expelled backward thanks to the grooves with a weak twist, allowing for stable tapping. Also has good chipping resistance qualities.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M6 1 2.5P Vanadium High-Speed Steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A KonfigurovatCena (bez DPH) od:9.50 €Cena včetně DPH:11.30 €Běžné datum odeslání:6 pracovních dnů