OSG Chamfering / Centering Tools（Single blade, two blades：Single blade）

TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS

By adopting of sharp high helix, clean working surface with less burr can be obtained.

End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

V coating enables longer lasting life than TIN-NC-LDS

Available tip angles are 90° (45° chamfer), 120°, and 130° (EX GOLD drill centering for slope / curved surfaces).

90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.

90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.

By adopting of sharp high helix, clean working surface with less burr can be obtained.

Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.

Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

By adopting of sharp high helix, clean working surface with less burr can be obtained.

V coating applied powder high speed XPM corner rounding cutter.

Compared to conventional products, high-speed cutting is possible and a wide range of operations such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High speed steel and carbide series are available.

Compared to conventional products, high-speed cutting is possible and a wide range of machining such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

Leading long shank drill with powder metal high speed steel XPM as base material, with 90° V-coated point angle. Ideal for chamfering deep parts.

High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

[Specifications]· Tip angle tolerance is 90° ±1°.

[Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.