SANKYO DIAMOND INDUSTRIAL Diamond Cutters（Application：For concrete, mortar）

?* Information on days to ship and prices

• 

  Dry Cup (for Building Materials)

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Best suited for rough surface grinding of concrete and stone.

  • Volume Discount

  Starting from∗ ：	88.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Dry Shaper (for Building Materials)

  SANKYO DIAMOND INDUSTRIAL

  Grinding of concrete, brick, block and stone. Biting into stones and concrete is prevented with resin embedding. Ideal for finishing and flat grinding.

  • Volume Discount

  Starting from∗ ：	130.95 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Dry Saver (for Stone)

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. The embedded resin suppresses any biting into concrete or stone materials. Ideal for finishing and flat grinding.

  • Volume Discount

  Starting from∗ ：	200.65 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Dry Surfacer

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. For cutting both concrete and stone. 3 times longer life. Cross-shaped tip increases grinding power and also improves durability.

  • Volume Discount

  Starting from∗ ：	135.79 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Dry Surfacer Ace

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
  
  [Features]
  · Workability is improved with surfacer sharpness intact.
  · Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
  · Lighter main unit: Main unit is lightweight while still maintaining substrate strength. Weight reduced by 13%.
  · Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.

  • Volume Discount

  Starting from∗ ：	128.06 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Dry Surfacer Ace DX

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
  
  [Features]
  · It has an improved lifetime.
  · Grinding of granite also has distinctively sharp performance.
  · Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
  · Lighter main unit: Main unit has been made lighter while still maintaining substrate strength. Weight reduced by 13%.
  · Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.

  • Volume Discount

  Starting from∗ ：	125.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Dry Surfacer Ace Light

  SANKYO DIAMOND INDUSTRIAL

  Grinding concrete, bricks, blocks, and stone materials. Suitable for minor work. Affordable pricing.
  
  [Features]
  · Suitable for minor work. Affordable pricing.
  · Equipped with shockless flange: The shockless flange absorbs and reduces vibration. Vibration caused by the manual technique is cut by 60%.
  · Lighter main unit: Main unit has been made lighter while still maintaining substrate strength. Weight reduced by 13%.
  · Improved convenience in attaching/detaching: By designing the wrench hole for attaching/detaching according to each manufacturer, it can be reliably installed and removed using the wrench included with the disc grinder.

  • Volume Discount

  Starting from∗ ：	81.26 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Concrete Cutting GH950 358X30.

  SANKYO DIAMOND INDUSTRIAL

  Cuts rebar reinforced concrete, resin concrete and high-strength concrete. Laser turbo blade that boasts a superb cutting edge. A diamond tip was designed and developed for cutting electrical poles (with steel bars).

  • Volume Discount

  Starting from∗ ：	646.68 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  R Cutter

  SANKYO DIAMOND INDUSTRIAL

  Used for cutting interlocking blocks, concrete, bricks, and blocks. Revolutionary Round-cutting Diamond Cutter

  • Volume Discount

  Starting from∗ ：	188.49 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Inazuma LJ 305 mm X30.5

  SANKYO DIAMOND INDUSTRIAL

  Cutting of blocks and secondary concrete products. Razor blade with emphasis on cutting feel used for standard type for both engine cutter and electric cutters.

  • Volume Discount

  Starting from∗ ：	149.80 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Craftsmanship, RIM

  SANKYO DIAMOND INDUSTRIAL

  For cutting concrete and blocks. A standard masterpiece, which is the pride of Sankyo Diamond. Rim type standard product that finishes cut cleanly

  • Volume Discount

  Starting from∗ ：	83.43 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Craftsmanship (Segment)

  SANKYO DIAMOND INDUSTRIAL

  For cutting concrete and blocks. A standard masterpiece, which is the pride of Sankyo Diamond. Segmented type standard product with emphasis on sharpness

  • Volume Discount

  Starting from∗ ：	80.95 €
  Min. Shipping Days ：	16 Days

  *Unit price with basic configuration

• 

  Craftsmanship RIM (Flange)

  SANKYO DIAMOND INDUSTRIAL

  For cutting concrete and blocks. Ideal for cutting edges. You can cut even right-angle sections nice and straight without interference from the locknut.

  • Volume Discount

  Starting from∗ ：	109.31 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Block Craftsman

  SANKYO DIAMOND INDUSTRIAL

  Cutting block, red brick, and concrete. Economy type that is convenient for simple cutting. Good finish with blocks, mortar, red bricks and concrete. Amazing long life.

  • Volume Discount

  Starting from∗ ：	28.93 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  SD Protect Mark II

  SANKYO DIAMOND INDUSTRIAL

  For cutting concrete products in general, reinforced concrete, tiles, bricks, blocks, mortar, ALC. Medium aperture blade for the famous SD cutters

  • Volume Discount

  Starting from∗ ：	303.00 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  SD Segment

  SANKYO DIAMOND INDUSTRIAL

  Best-selling SD cutter evolving from the segment type. It emphasizes tool life. With emphasis on safety.
  
  [Features]
  · Waveform substrate: Prevents heat buildup in substrate, ensuring stable cutting performance.
  · 4 Tips: Takes the strong points of both rimmed and segmented types to provide sharper cutting performance and a cleaner finish.
  · Diamond layer [8 mm] improves service life.
  · Cracking is prevented with oval key hole and chamfering.
  · Features a rounded chip to prevent chip splintering.

  • Volume Discount

  Starting from∗ ：	102.38 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  SD Cutter 8X

  SANKYO DIAMOND INDUSTRIAL

  The evolved SD Cutter type has a diamond layer that has been increased 8 fold. Diamond Cutter Recognized by Work Site Professionals
  
  [Features]
  · It has prioritized sharpness. SD Cutter: An evolved SD Cutter Type in which the diamond layer has been increased 8 fold.
  · Waveform substrate provides cooling effect, improving cutting performance and extending life.
  · Super Long Selling Item An iconic model of the diamond cutter recognized by all work site professionals.
  · Superior product usable in wide applications with cutting performance and durability.

  • Volume Discount

  Starting from∗ ：	86.19 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cutting Master

  SANKYO DIAMOND INDUSTRIAL

  Excellent sharpness. Short chip turbo segment with excellent sharpness. Diagonal slits: The ejection effect on cutting chips prevents heat accumulation, and the cutting ability is maintained. Short tip: Radiates heat and reduces substrate runout. Improved safety. Rounded edge: The chip angle is rounded to prevent chip splintering and improve safety.

  • Volume Discount

  Starting from∗ ：	95.72 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Laser S1 Cutter 105

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · Has the highest cutting speed level in the industry.
  · Hardened board: Board has been heat treated to increase board strength.
  · New wave substrate: Increased rigidity with wave shape of quenched substrate.
  · Laser welding: Improves the strength of the joints by laser welding chips and circuit boards.
  · High strength glue: Adopts a newly developed glue to have a strong tip even if the blade is thin.
  · Turbo-tip: The area of contact with the workpiece is small, cutting resistance is suppressed, and sharpness is improved. The sharpness of the blade is maintained stably by preventing the diamond layer from overheating and by clearing the cut chips.
  · Diagonal slits: The ejection effect on cutting chips prevents heat accumulation in the diamond layer, and the cutting ability is maintained stably.

  • Volume Discount

  Starting from∗ ：	99.93 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Laser S1 Cutter 125

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · Has the highest cutting speed level in the industry.
  · Hardened board: Board has been heat treated to increase board strength.
  · New wave substrate: Increased rigidity with wave shape of quenched substrate.
  · Laser welding: Improves the strength of the joints by laser welding chips and circuit boards.
  · High strength glue: Adopts a newly developed glue to have a strong tip even if the blade is thin.
  · Turbo-tip: The area of contact with the workpiece is small, cutting resistance is suppressed, and sharpness is improved. The sharpness of the blade is maintained stably by preventing the diamond layer from overheating and by clearing the cut chips.
  · Diagonal slits: The ejection effect on cutting chips prevents heat accumulation in the diamond layer, and the cutting ability is maintained stably.

  • Volume Discount

  Starting from∗ ：	103.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Sankyo Laser Turbo 8X

  SANKYO DIAMOND INDUSTRIAL

  Ideal for cutting concrete and granite. Highly safe. Laser welding: Improves the strength by laser welding chips and circuit boards. Hardened board: Adopts a heat treated board for increased board strength. Enhanced sharpness. Can cut granite: High durability for cutting granite thanks to high-strength bonding and laser welding.

  • Volume Discount

  Starting from∗ ：	102.52 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Diamond Cutter Hero

  SANKYO DIAMOND INDUSTRIAL

  Dual cutter for cutting concrete and granite. Excellent sharpness. With diagonal slits, the ejection effect on cutting chips prevents heat accumulation, and the cutting ability is maintained.
  
  [Features]
  · Ideal for cutting concrete and granite.
  · Excellent sharpness. Diagonal slits: The ejection effect on cutting chips prevents heat accumulation, and the cutting ability is maintained.
  · Short tip: Radiates heat and reduces substrate runout.
  · Diamond layer: Deepening the slit grooves on the diamond layer improves chip discharge performance is and enhances sharpness.
  · Improved safety.
  · Rounded edge: The chip angle is rounded to prevent chip splintering and improve safety.

  • Volume Discount

  Starting from∗ ：	142.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Diamond Cutter Master Swordsman

  SANKYO DIAMOND INDUSTRIAL

  Dual cutter for cutting concrete and granite. Achieves a clean surface finish. Minimal resistance with the material being cut, achieving a clean finish. Can also be used with air tools. With emphasis on safety. Little resistance against the base plate during cutting and thus safe. Excellent sharpness. Unevenly distributed grooves in the diamond layer are used. Reduces substrate vibration and enhances sharpness.

  • Volume Discount

  Starting from∗ ：	79.12 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Dry Cutter

  SANKYO DIAMOND INDUSTRIAL

  Repairing cracks in concrete and mortar, cutting pilot grooves for caulking injection

  • Volume Discount

  Starting from∗ ：	171.78 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Blue Inazuma EH

  SANKYO DIAMOND INDUSTRIAL

  Cuts rebar reinforced concrete and concrete secondary products (fume pipes, U grooves). Excellent cutting quality even with the laser turbo type low torque developed only for electric motor type equipment.

  • Volume Discount

  Starting from∗ ：	247.45 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Red Inazuma

  SANKYO DIAMOND INDUSTRIAL

  Cuts rebar reinforced concrete and concrete secondary products (fume pipes, U grooves). Can cut under conditions most ideal for the engine model. Laser turbo type.

  • Volume Discount

  Starting from∗ ：	339.14 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Chip Welding U Cutter

  SANKYO DIAMOND INDUSTRIAL

  • Volume Discount

  Starting from∗ ：	110.33 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chip Welding V Cutter

  SANKYO DIAMOND INDUSTRIAL

  For the repairing of cracks on concrete, mortar and the like, and lower grooving for coking injection. The welding manufacturing method makes the processing speed is 1.5 times that of conventional products. Groove shape does not collapse until the end. Cut end is finished beautifully with the low vibration.

  • Volume Discount

  Starting from∗ ：	110.33 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  U Cut

  SANKYO DIAMOND INDUSTRIAL

  Repairing cracks in concrete and mortar, cutting pilot grooves for caulking injection

  • Volume Discount

  Starting from∗ ：	263.88 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Red Inazuma GL

  SANKYO DIAMOND INDUSTRIAL

  Cutting of blocks and secondary concrete products. Razor blade for standard engine cutter. Long life design.

  • Volume Discount

  Starting from∗ ：	160.23 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Red Inazuma GX

  SANKYO DIAMOND INDUSTRIAL

  Cutting of blocks and secondary concrete products. Razor blade for standard engine cutter. Long life design.
  
  [Features]
  · Can cut under conditions most ideal for the engine model.
  · Laser Turbo Type

  • Volume Discount

  Starting from∗ ：	247.45 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Japan Pro

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  It can be used for both asphalt and concrete, and can be used for cutting paved roads.
  [Features]
  A segment type that emphasises sharpness.

  • Volume Discount

  Starting from∗ ：	221.97 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Road Blade JAPAN

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  It can be used for both asphalt and concrete, and can be used to cut paved roads.
  [Features]
  A segment type that emphasises sharpness.

  Starting from∗ ：	221.97 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Road Blade JAPAN DX

  SANKYO DIAMOND INDUSTRIAL

  Pavement cutting, AR-A / for asphalt, SR-AC / for dual-use cutting of concrete and asphalt, SR-C / for concrete. Dedicated road cutter blade

  • Volume Discount

  Starting from∗ ：	252.10 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  Road Blade

  SANKYO DIAMOND INDUSTRIAL

  Pavement cutting, AR-A / for asphalt, SR-AC / for dual-use cutting of concrete and asphalt, SR-C / for concrete. Dedicated road cutter blade

  • Volume Discount

  Starting from∗ ：	347.80 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  RZ Protect MARK2

  SANKYO DIAMOND INDUSTRIAL

  Cuts rebar reinforced (10 mm bars) concrete, concrete and blocks. Runs straight. Perfect sharpness. Increased cutting performance and service life. Protect chip: Prevents wear on the substrate by extending the side chip. (Protector)

  • Volume Discount

  Starting from∗ ：	65.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SE Protect MARK2

  SANKYO DIAMOND INDUSTRIAL

  Cuts rebar reinforced (10 mm bars) concrete, concrete and blocks. Runs straight. Perfect sharpness. Increased cutting performance and service life. Protect chip: Prevents wear on the substrate by extending the side chip. (Protector)

  • Volume Discount

  Starting from∗ ：	68.35 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  SD Protect MARK2

  SANKYO DIAMOND INDUSTRIAL

  An excellent product with extremely good SD Cutter workability. Increased cutting performance and service life. Waveform substrate: Prevents heat buildup in substrate, ensuring stable cutting performance. Protect chip: Prevents wear on the substrate by extending the side chip. (Protector) Lifespan extended via [8 mm] diamond layer.

  • Volume Discount

  Starting from∗ ：	107.13 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Diamond Cutter RZ Protect Mark II (Dry Type)

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · Affordable version of the SD series. This type cuts deep and straight and produces clean finished cut sections.
  · By extending the side tips, the substrate is protected from wear.
  [Applications]
  · For cutting concrete, blocks, bricks, etc.

  • Volume Discount

  Starting from∗ ：	65.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Diamond Cutter SD Protect Mark II (Dry Type)

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · Designed specifically for high straight cutting performance. An updated version of the SD cutter with further improved workability and durability. A top-end item with 20% improved sharpness and a 20% improved service-life.
  · By extending the side tips, the substrate is protected from wear.
  · The side-surface tips help prevent abrasion to the substrate and improve its ability to cut straight.
  [Applications]
  · For cutting general types of concrete, tiles, bricks, ALC blocks, incombustible materials, FRP and hard PVC.

  • Volume Discount

  Starting from∗ ：	119.63 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Low Noise Night For Cutting Reinforced Concrete

  SANKYO DIAMOND INDUSTRIAL

  · Same sharpness but with an added low-noise function
  · Improved long life performance
  [Features]
  · Its special substrate reduces noise and prevents the generation of harsh high-pitched frequencies during cutting.
  · Uses high strength diamonds with the diamond later increased by 30%. Features a tip height of 8 mm.
  · By employing a turbo tip (uneven tip), the contact surface area with the work material is minimal, the resistance on the tip reduced and the cutting ability improved.
  [Applications]
  · For cutting reinforced (10-mm rebar) concrete and granite.
  

  • Volume Discount

  Starting from∗ ：	99.93 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Japan Kuroto (Pro) DX Silent For Cutting Asphalt & Concrete

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · Dedicated blade for road cutters
  · Reduced high frequencies
  · Same sharpness but with an added low noise function.
  [Applications]
  · For cutting paved roads
  · Asphalt/concrete cutting dual-use
  

  • Volume Discount

  Starting from∗ ：	240.51 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Renovating Tool Line Cut U

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · A screw-in type that is easily mountable to disk grinders and which ensures minimal line deviations when cutting.
  · The caulking material adhesive area is large for more reliable renovations.
  [Applications]
  · For repairing concrete, mortar and cracks and for cutting grooves for injecting caulking material.
  

  • Volume Discount

  Starting from∗ ：	130.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Renovating Tool Line Cut V

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · A screw-in type that is easily mountable to disk grinders and which ensures minimal line deviations when cutting.
  · The tip is V-shaped, giving it excellent cutting performance in cracks and improving working efficiency.
  [Applications]
  · For repairing concrete, mortar and cracks and for cutting grooves for injecting caulking material.
  

  • Volume Discount

  Starting from∗ ：	130.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Goketsu With Flange

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · Diagonal slit: Discharges cutting chips to prevent heat build-up and to maintain sharpness.
  · Short tip: Provides a heat dissipating effect and reduces the amount which the substrate shakes.
  · Diamond layer: The deeper slit grooves improve cutting chip discharge and sharpness.
  · Rounded edge: The tip edges are rounded to prevent chipping and to improve safety.
  [Applications]
  · For cutting reinforced (10-mm rebar) concrete, granite and blocks

  • Volume Discount

  Starting from∗ ：	123.19 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

Loading...