Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Blade diameter (D)(φ)
  • R Size(mm)
  • work material
  • Blade length (ℓ)(mm)
  • Number of flutes(sheet)
  • Type
  • Výrobce
  • UNION TOOL Carbide Radius End Mills(Machining Application:Side)

    • HLRS 4-Flute Long-Neck Radius
      • SLEVA

      UNION TOOL

      HLRS 4-Flute Long-Neck Radius

      [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Rigidity-oriented blade shape provides long life even when machining high hardness materials· Capable of stable machining for both dry and wet type· New HARDMAX coating adopted to improve oxidation resistance.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.8 ~ 60.05 ~ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○] / Copper[○]0.48 ~ 4.84Long-Neck Radius50 ~ 1204 ~ 62 ~ 48
      Cena (bez DPH) od:
      55.58 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • HLRS2000 HM Coated 2 Flute Long-Neck Radius
      • SLEVA
      • Volume Discount

      UNION TOOL

      HLRS2000 HM Coated 2 Flute Long-Neck Radius

      [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Capable of cutting everything from raw materials to high-hardness materials· Capable of stable, long-life machining for both dry and wet type
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.4 ~ 60.05 ~ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.4 ~ 62Long-Neck Radius50 ~ 1204 ~ 61 ~ 60
      Cena (bez DPH) od:
      43.45 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • CRRS UT Coated 4-Flute Radius
      • SLEVA
      • Volume Discount

      UNION TOOL

      CRRS UT Coated 4-Flute Radius

      [Features]· Suitable for everything from raw materials to 55 HRC, the UTCOAT provides a long life· Variable split, high torsion and positive rake angle design enables stable machining· A blade design that reduces the cutting resistance in helical and inclined use, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ~ 120.3 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]2 ~ 124Long-Neck Radius60 ~ 1204 ~ 126 ~ 36
      Cena (bez DPH) od:
      85.32 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • HRRS, HM Coated 4-Flute Short Shank Radius

        UNION TOOL

        HRRS, HM Coated 4-Flute Short Shank Radius

        [Features]· Unique corner rounding creates larger cutting depth and pick feed than with a ball· The seamless corner radius shape reduces cutting resistance and chattering· High hardness materials up to 65 HRC can also be machined
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ~ 120.3 ~ 4Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○]2 ~ 124Long-Neck Radius45 ~ 753 ~ 126 ~ 36
        Cena (bez DPH) od:
        76.10 €
        Cena včetně DPH:
        90.56 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • HRRS, HM Coated 4-Flute Radius

          UNION TOOL

          HRRS, HM Coated 4-Flute Radius

          [Features]· Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool· The optimized corner radius size enables processing with larger feed than conventional· Seamless Corner Radius Shape· High hardness materials up to 65 HRC can also be machined
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ~ 120.3 ~ 4Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○]2 ~ 124Long-Neck Radius70 ~ 1203 ~ 126 ~ 36
          Cena (bez DPH) od:
          76.38 €
          Cena včetně DPH:
          90.89 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius
          • SLEVA

          UNION TOOL

          HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius

          [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Capable of cutting everything from raw materials to high-hardness materials· Capable of stable, long-life machining for both dry and wet type
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          0.2 ~ 60.05 ~ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Copper[◎]0.2 ~ 62Long-Neck Radius50 ~ 1004 ~ 60.5 ~ 30
          Cena (bez DPH) od:
          60.34 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • CPRS25NSP Two-Flute Long-Neck Radius for Processing Aluminium / Resin, 25° Torsion

            UNION TOOL

            CPRS25NSP Two-Flute Long-Neck Radius for Processing Aluminium / Resin, 25° Torsion

            [Features]· For Machining Aluminum/Resin· Non-coated, R0.1 corner radius, long-neck radius· Subtle corner rounding suppresses lasting bottom cutter marks
            Více informací
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            2 ~ 120.1High Hardness Steel: to HRC65[○] / Aluminum[◎] / Resin[◎]3 ~ 162Long-Neck Radius38 ~ 903 ~ 126 ~ 35
            Cena (bez DPH) od:
            45.16 €
            Cena včetně DPH:
            53.74 €
            Běžné datum odeslání:
            9 pracovních dnů
            Konfigurovat
          • C-CRS UT Coated 2-Flute Radius

              UNION TOOL

              C-CRS UT Coated 2-Flute Radius

              [Features]· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)· Available with an extensive lineup of corner radii
              Více informací
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              3 ~ 60.3 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]10 ~ 152Radius45 ~ 506-
              Cena (bez DPH) od:
              88.62 €
              Cena včetně DPH:
              105.46 €
              Běžné datum odeslání:
              7 pracovních dnů
              Konfigurovat
            • CNRS 4-Flute Radius for Difficult-to-Machine Materials

                UNION TOOL

                CNRS 4-Flute Radius for Difficult-to-Machine Materials

                [Features]· High Efficiency 4-Flute Radius for Machining Titanium / Super Heat Resistant Alloy· Life-span increasing UT coating suitable for heat resistant and difficult to cut materials· Variable split, high torsion and positive rake angle design enables stable machining· A blade design that reduces the cutting resistance in helical and inclined use, etc.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                6 ~ 121 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]16 ~ 264Radius90 ~ 1206 ~ 12-
                Cena (bez DPH) od:
                131.63 €
                Cena včetně DPH:
                156.64 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • CPRS30N Two-Flute Long-Neck Radius for Processing Aluminium / Resin, 30° Torsion

                  UNION TOOL

                  CPRS30N Two-Flute Long-Neck Radius for Processing Aluminium / Resin, 30° Torsion

                  [Features]· For Machining Aluminum/Resin· Non-Coated Long-Neck Radius· Surface roughness was emphasized in the design of this tool
                  Více informací
                  Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                  4 ~ 100.3 ~ 0.8Aluminum[◎] / Copper[○] / Resin[◎]5 ~ 122Long-Neck Radius50 ~ 806 ~ 1010 ~ 36
                  Cena (bez DPH) od:
                  54.21 €
                  Cena včetně DPH:
                  64.51 €
                  Běžné datum odeslání:
                  9 pracovních dnů
                  Konfigurovat
                • CRS40HSP High Efficiency 3-Flute Long Neck Radius 40° Twist

                    UNION TOOL

                    CRS40HSP High Efficiency 3-Flute Long Neck Radius 40° Twist

                    [Features]· High Efficiency 3-Flute Long Neck Radius (Short Blade)· 40° Torsion· Supports materials from SUS to pre-hardened and hardened steel (60 HRC)
                    Více informací
                    Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                    3 ~ 120.1 ~ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Graphite[○] / Resin[○]4 ~ 153Long-Neck Radius38 ~ 1203 ~ 127 ~ 54
                    Cena (bez DPH) od:
                    70.40 €
                    Cena včetně DPH:
                    83.78 €
                    Běžné datum odeslání:
                    9 pracovních dnů
                    Konfigurovat
                  • CRS20HSP High Efficiency 4-Flute Long Neck Radius 20° Twist

                      UNION TOOL

                      CRS20HSP High Efficiency 4-Flute Long Neck Radius 20° Twist

                      [Features]· High-rigidity 4-flute radius 8 (for high-hardness materials). 20° torsion.
                      Více informací
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      2  ~ 12 0.2 ~ 1.2General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / Cast Iron[◎]2.5 ~ 15 4Long-Neck Radius50 ~ 756 ~ 125 ~ 30
                      Cena (bez DPH) od:
                      48.20 €
                      Cena včetně DPH:
                      57.36 €
                      Běžné datum odeslání:
                      9 pracovních dnů
                      Konfigurovat