Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
YAMAWA MFG
Carbide Tap for Ultra High Hardness Steel UH-CT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M2.5 | 0.45 | 5P | Carbide | High Hardness Steel (50-60 HRC)[○] | Point tap | For through hole / For blind hole | Available |
YAMAWA MFG
Stainless Steel Point Tap SU+PO / SU-PO
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M2.5 | 0.45 | 5P | High-speed steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] | Point tap | For through hole | N/A |
YAMAWA MFG
Spiral Tap for Stainless Steel SU+SP / SU-SP
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M2.5 | 0.45 | 2.5P | High-speed steel | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] | Spiral Tap | For blind hole | N/A |
YAMAWA MFG
Hand Tap for Left-Hand Threads HT(LH)
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Meter | M2.5 | 0.45 | 5P | High-speed steel | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Hand Tap | For through hole / For blind hole | N/A |