YAMAWA MFG Screw-Hole-Related Tools（work material：Quenched and tempered steel (25 to 35 HRC)）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Hand Tap HT (Cutting Tap)
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.- Volume Discount
- Stock
Starting from∗ ： 6.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX
YAMAWA MFG
Suitable for tapping high carbon steel like S55C etc. Has undergone oxidation treatment.- Volume Discount
Starting from∗ ： 11.36 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Flute Tap SP (N-SP)
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.- Volume Discount
Starting from∗ ： 8.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Titanium coating point tab PO-V (N-PO-V)
YAMAWA MFG
Coated point tap suitable for low carbon steel to high carbon steel machining.
[Features]
· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
[Applications]
· Can process both synchronously and asynchronously.
· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).- Volume Discount
Starting from∗ ： 25.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Plus Series Spiral Tap +SP (N+SP)
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).- Volume Discount
Starting from∗ ： 17.48 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap PO(N-PO)
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.- Volume Discount
Starting from∗ ： 15.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Hand Tap for Difficult-to-Cut Materials EH-HT
YAMAWA MFG
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.- Volume Discount
Starting from∗ ： 16.23 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP
YAMAWA MFG
Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on carbon steel and alloy steel, processing in vertical and horizontal directions.- Volume Discount
Starting from∗ ： 36.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL
YAMAWA MFG
We have adopted the side through-hole shape by dry machining and ultra-high-speed machining.- Volume Discount
Starting from∗ ： 36.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS
YAMAWA MFG
Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the vertical direction processing.- Volume Discount
Starting from∗ ： 36.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP
YAMAWA MFG
Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the horizontal direction processing.- Volume Discount
Starting from∗ ： 36.15 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
MC - Helical Cutter MC-HLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.Starting from∗ ： 253.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel Hand Tap SU-HT
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 5 m/min or less is recommended.
[Applications]
Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.- Volume Discount
Starting from∗ ： 8.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap for Titanium Alloy, for Through Hole ZET-P
YAMAWA MFG
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.- Volume Discount
Starting from∗ ： 21.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap for Titanium Alloy ZET-B
YAMAWA MFG
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.- Volume Discount
Starting from∗ ： 21.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap for Nickel Base Alloy ZEN-B
YAMAWA MFG
A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.- Volume Discount
Starting from∗ ： 21.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Hand Tap for Left-Hand Threads HT(LH)
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.- Volume Discount
Starting from∗ ： 21.36 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Coating Spiral Tap AU+ SP
YAMAWA MFG
Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.- Volume Discount
Starting from∗ ： 21.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Plus Series Point Tap +PO (N+PO)
YAMAWA MFG
* N+SP will be replaced with +SP as soon as there is no more in stock.- Volume Discount
Starting from∗ ： 10.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Shank Spiral Tap LS-SP(LS-N-SP)
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.- Volume Discount
Starting from∗ ： 19.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Shank Titanium Coated Spiral Tap LS-SP-V(LS-N-SP-V)
YAMAWA MFG
* LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.- Volume Discount
Starting from∗ ： 37.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Shank Titanium Coated Point Tap LS-PO-V(LS-N-PO-V)
YAMAWA MFG
* LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.- Volume Discount
Starting from∗ ： 37.13 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Spiral Tap for High Speed F-SP
YAMAWA MFG
Capable of 20/MIN ~ 30/MIN high-speed processing. Use of medium or low speeds at 15M/MIN or less will cause a poor shape and poor emission of chips, causing trouble to occur.- Volume Discount
Starting from∗ ： 29.58 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Spiral Tap For High Carbon Steel HC+SP / HC-SP
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C.- Volume Discount
Starting from∗ ： 10.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap For High Carbon Steel HC+PO / HC-PO
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C.- Volume Discount
Starting from∗ ： 10.27 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Short Spiral Tap for Deep Holes S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.- Volume Discount
Starting from∗ ： 299.16 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Short Point Tap for Deep Holes S-PO
YAMAWA MFG
A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Short thread length gives low frictional resistance.
· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.- Volume Discount
Starting from∗ ： 12.65 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide MC - Helical Cutter MC-CSLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.Starting from∗ ： 295.34 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP
YAMAWA MFG
Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.- Volume Discount
Starting from∗ ： 13.71 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap for Difficult-to-Cut Materials EH-PO
YAMAWA MFG
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.- Volume Discount
Starting from∗ ： 14.05 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SU Roll Tap SURZ
YAMAWA MFG
[Features]
· A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
· The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
· Demonstrates effectiveness for roll tap machining of stainless steel.
· Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.- Volume Discount
Starting from∗ ： 37.44 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL
YAMAWA MFG
[Features]
· Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).
· Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.
· Adopts an original groove shape that realizes stable scrap discharge at medium speeds.
· Improves the surface roughness of female threads.- Volume Discount
Starting from∗ ： 37.30 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 128.63 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Spiral Tap For Medium-Hardness Carbon Steel MHSP
YAMAWA MFG
[Features]
· Ideal for S48C to S55C forged products and thermally refined materials (20 to 30 HRC).
· Manufactured with abrasion-resistant high-speed steel and a special coating for a longer service life.
· The special shape of the threaded section helps prevent the chipping of the section which is fully-threaded, reducing tapping torque and frictional resistance while also maintaining its thread guiding capability.
· The overall length is set so that an appropriate amount of tool protrusion is secured to prevent the ejected cutting chips interfering with the holder.- Volume Discount
Starting from∗ ： 42.84 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX | HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP | HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL | HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS | HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP | Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL | ||||||||||||||||||||||||||||
| Starting from∗ | 6.44 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 11.36 € *Unit price with basic configuration Volume Discount | 8.94 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 25.02 € *Unit price with basic configuration Volume Discount | 17.48 € *Unit price with basic configuration Volume Discount | 15.26 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 16.23 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 253.22 € *Unit price with basic configuration | 8.89 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 21.37 € *Unit price with basic configuration Volume Discount | 21.37 € *Unit price with basic configuration Volume Discount | 21.37 € *Unit price with basic configuration Volume Discount | 21.36 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 21.66 € *Unit price with basic configuration Volume Discount | 10.30 € *Unit price with basic configuration Volume Discount | 19.63 € *Unit price with basic configuration Volume Discount | 37.13 € *Unit price with basic configuration Volume Discount | 37.13 € *Unit price with basic configuration Volume Discount | 29.58 € *Unit price with basic configuration Volume Discount | 10.27 € *Unit price with basic configuration Volume Discount | 10.27 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 299.16 € *Unit price with basic configuration Volume Discount | 12.65 € *Unit price with basic configuration Volume Discount | 295.34 € *Unit price with basic configuration | 13.71 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 14.05 € *Unit price with basic configuration Volume Discount | 37.44 € *Unit price with basic configuration Volume Discount | 37.30 € *Unit price with basic configuration Volume Discount | 128.63 € *Unit price with basic configuration | 42.84 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | 8 Days | Same day | 6 Days | 8 Days | Same day | Same day | 8 Days | 8 Days | 8 Days | 7 Days | 8 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 7 Days | 6 Days | Same day | 8 Days | 8 Days | 8 Days | Same day | 8 Days | 8 Days | 8 Days | 8 Days | 7 Days |
| Specifications |
| |||||||||||||||||||||||||||||||||
| Screw Types | Meter / Unified / Sewing Machine | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified / Whitworth | Meter | Meter | Meter | Meter / Whitworth | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter / Unified | Meter | Meter | Meter |
| Screw size (Nominal) | No.0-80UNF ～ M48 | M3 ～ M16 | M3 ～ M12 | M3 ～ M12 | M2.2 | No.10-32UNF ～ M24 | M5 ～ M8 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | 1015 ～ 32506N300M | M3 ～ M6 | M3 ～ M20 | M3 ～ M20 | M3 ～ M20 | M2.5 ～ M8 | M2 ～ M12 | M3 ～ M6 | 1'-8UNC ～ M36 | M3 ～ M12 | M3 ～ M12 | M3 ～ M12 | 1/2W12 ～ M30 | M1.4 ～ M24 | M39 ～ M45 | M2 ～ M42 | 06510X28R ～ 200505N300M | M3 ～ M24 | M3 ～ M24 | No.2 ～ No.6 | - | 3.5 ～ 9 | M8 ～ M16 |
| Pitch (P), Number of Threading(mm) | 0.2 ～ 7 | 0.5 ～ 2 | 0.5 ～ 1.25 | 0.5 ～ 1.75 | 0.45 | 0.75 ～ 2 | 0.8 ～ 1.25 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | - | 0.5 ～ 1 | 0.5 ～ 2.5 | 0.5 ～ 2.5 | 0.5 ～ 2.5 | 0.35 ～ 0.75 | 0.4 ～ 1.75 | 0.5 ～ 1 | 1 ～ 4 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 3 | 0.3 ～ 3 | 3.5 ～ 4.5 | 0.4 ～ 4.5 | 0.5 ～ 3 | 0.5 ～ 3 | 0.5 ～ 3 | 0.2 ～ 56 | - | 1 | 1 ～ 2 |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 2.5P | 2.5P | 5P | 2.5P | 5P | 5P | 2.5P | 5P | 2.5P | 2.5P | - | 1.5P ～ 4P | 5P | 3P | 3P | 5P | 2.5P | 5P | 2.5P | 2.5P | 5P | 2.5P | 2.5P | 5P | 2.5P | 5P | - | 3P | 4.5P | 2P | 5P ～ 7P | - | 2.5P |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | High-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Carbide | Cobalt HSS |
| work material | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[◎] | Quenched and tempered steel (25 to 35 HRC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] |
| Tap Type | Hand Tap | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Point tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Thread cutter | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Point tap | Thread cutter | Spiral Tap | Point tap | Roll tap | Spiral Tap | Thread cutter | Spiral Tap |
| Hole type | For through hole / For blind hole | For blind hole | For blind hole | For through hole | For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole | For blind hole | For blind hole | For through hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | For through hole | - | For blind hole |
| Coating Y/N | N/A | N/A | N/A | Available | N/A | N/A | N/A | Available | Available | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | Available | N/A | N/A | N/A | Available | Available | N/A | N/A | N/A | N/A | Available | N/A | N/A | Available | Available | Available | Available |
| Coating Type | - | - | - | TiN | - | - | - | TiCN | TiCN | TiCN | TiCN | TiN | - | - | - | - | - | TiN | - | - | - | TiN | TiN | - | - | - | - | TiAlN | - | - | Other | Other | Other | - |
| Overall Length (L)(mm) | 36 ～ 185 | 46 ～ 95 | 46 ～ 82 | 46 ～ 82 | 42 | 60 ～ 120 | 60 ～ 70 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 70 ～ 200 | 46 ～ 62 | 46 ～ 105 | 46 ～ 105 | 46 ～ 105 | 46 ～ 70 | 42 ～ 82 | 46 ～ 62 | 100 ～ 300 | 100 ～ 150 | 100 ～ 150 | 46 ～ 82 | 46 ～ 135 | 36 ～ 120 | 165 ～ 180 | 42 ～ 175 | 50 ～ 140 | 46 ～ 120 | 46 ～ 120 | - | - | - | 90 ～ 110 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Brand
-
- MISUMI (7)
- YAMAWA MFG (34)
- OSG (23)
- NACHI(FUJIKOSHI) (4)
- CARMEX (2)
- NS TOOL (2)
- SKC (2)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- TANOI MFG (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.