YANASE Wheels with Shafts（Application：Polishing）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 13 Days or Less

?* Information on days to ship and prices

Flap Wheels with Shaft

YANASE

High-quality standard products that come in a vast variety of sizes and grain sizes.

[Features]
· A wide range of sizes and particle sizes with high quality.
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.

Volume Discount

Starting from^∗ ：	7.36 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Unilon Wheel with Shaft (Hard)

YANASE

Ideal for removal of scratches and rust. Can also be used for hairline finishing.

[Features]
· Selectable from abundant granularity and sizes.
· It removes burrs without scraping, with no secondary burrs.
· As it is soft, elastic and has good adaptability, it prevents fatigue.

Volume Discount

Starting from^∗ ：	9.84 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Unilon Wheel with Shaft

YANASE

Prevents over-scraping, and produces a uniform finished surface with no clogging.

[Features]
· Unilon's standard product.
· Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
· Its autogenous properties prevent clogging.
· Polishes without scratching.
· Finishes the surface without scraping the material.
· Flexible and fits perfectly to the curved surfaces.

Volume Discount

Starting from^∗ ：	14.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Cup Disc

YANASE

A product which can polish both bottom and side surfaces at the same time.

[Features]
· The tip (bottom) can also be used for added convenience.
· Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
· Unlikely to clog, allowing a uniform finish to be achieved throughout.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Excellent autogenous properties.
· Ideal for polishing flat surfaces, bottom surfaces and corners

Volume Discount

Starting from^∗ ：	15.36 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flap With Mugen Shaft

YANASE

[Features]
· Flap wheel that is easy to use and does not scratch the workpiece easily, since both sides are cap-less and metal fittings are not used.
· Tough abrasive cloth is used to achieve both grinding power and durability.
· The paper is flexible and resilient, for a tight fit with the workpiece when grinding.
· Deburring of metals and rust-removal.
· For general metal surface grinding, such as flat surfaces, curved surfaces and inner surfaces.
· Suitable for grinding in narrow parts that are difficult to reach with the tips of the flaps.

Volume Discount

Starting from^∗ ：	6.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Cushioning Cone

YANASE

Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.

Volume Discount

Starting from^∗ ：	1.60 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Cushioning Cone Holder

YANASE

Since the holder part is a sponge, the contact is soft, and prevents excessive grinding.

[Features]
· Attachment when using a cushioning cone.
· Superb elasticity with the dedicated sponge.

Volume Discount

Starting from^∗ ：	14.29 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single-Action Top with Shaft

YANASE

[Features]
· This is the product you always wanted.
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.
· One-touch shaft attachment

Volume Discount

Starting from^∗ ：	3.42 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Flexible Shaft 1

YANASE

[Features]
· Collet chuck type, for φ3/φ6.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.

Volume Discount

Starting from^∗ ：	181.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flexible Shaft 2

YANASE

[Features]
· A drill chuck type that can be used with up to φ8.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.

Volume Discount

Starting from^∗ ：	88.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flap Wheels with Shaft

YANASE

[Features]
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.

Volume Discount

Starting from^∗ ：	7.47 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

NEO Flap Wheel, P Type

YANASE

[Features]
· The core has been made smaller to wield longer usable flap length.
· The 6‑mm shaft model features a stepped shaft.
· The papers are block types, giving springiness, a longer life and improved grinding performance.

Volume Discount

Starting from^∗ ：	7.31 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Application
Type
Material
Outer Diameter(mm)
Width(mm)
Shaft Diameter(mm)
Particle Size(#)
Stationary Diameter(mm)
Screw Hole Diameter(mm)


Brand	YANASE	YANASE	YANASE	YANASE	YANASE	YANASE	YANASE	YANASE	YANASE	YANASE	YANASE	YANASE
Product Series	Flap Wheels with Shaft	Unilon Wheel with Shaft (Hard)	Unilon Wheel with Shaft	Cup Disc	Flap With Mugen Shaft	Cushioning Cone	Cushioning Cone Holder	Single-Action Top with Shaft	Flexible Shaft 1	Flexible Shaft 2	Flap Wheels with Shaft	NEO Flap Wheel, P Type
Starting from^∗	7.36 € *Unit price with basic configuration Volume Discount	9.84 € *Unit price with basic configuration Volume Discount	14.95 € *Unit price with basic configuration Volume Discount	15.36 € *Unit price with basic configuration Volume Discount	6.41 € *Unit price with basic configuration Volume Discount	1.60 € *Unit price with basic configuration Volume Discount	14.29 € *Unit price with basic configuration Volume Discount	3.42 € *Unit price with basic configuration Volume Discount	181.38 € *Unit price with basic configuration Volume Discount	88.36 € *Unit price with basic configuration Volume Discount	7.47 € *Unit price with basic configuration Volume Discount	7.31 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	5 Days	5 Days	5 Days	5 Days	6 Days	5 Days	8 Days	8 Days	5 Days	6 Days	5 Days	9 Days
Application	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing	Polishing
Type	Flap with shaft	Flap with shaft	Flap with shaft	Flap with shaft	Flap with shaft	Paper	Holder	Flap with shaft	-	-	Flap with shaft	Flap with shaft
Material	-	-	-	-	-	-	-	-	-	-	-	-
Outer Diameter(mm)	10 ～ 30	10 ～ 25	50 ～ 100	10 ～ 25	25 ～ 50	-	Tip diameter ø14; Large end diameter φ20	10 ～ 25	-	-	10 ～ 125	20
Width(mm)	10	13 ～ 25	25	20 ～ 25	25	-	50	10 ～ 25	-	-	10 ～ 30	25
Shaft Diameter(mm)	3	3 ～ 6	6	3 ～ 6	6	-	6	-	-	-	3 ～ 6	6
Particle Size(#)	80 ～ 180	600 ～ 1500	120 ～ 600	60 ～ 100	60 ～ 240	80 ～ 150	-	60 ～ 240	-	-	40 ～ 600	60
Stationary Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-
Screw Hole Diameter(mm)	-	-	-	-	-	-	-	3 ～ 6	-	-	-	-

Filter by:

Narrow search by specifying spec./dim.

Application
- Polishing
- Polishing
Clear

Type
- Flap with shaft
- Band
- Drum
- Paper
- Holder
- Holder (Drum)
Clear

Material
- Cotton
- Sisal
- Flannel
- Buff
- Felt
Clear

Outer Diameter(mm)
2.1

3

4

5

6

⌀6

6,8,10,12

6.1

7

8

⌀8

8–13

8.1

9

9.5

10

⌀10

11

12

⌀12

12.1

12.7

13

⌀13

14

⌀14

Tip diameter ø14; Large end diameter φ20

15

⌀15

15.1

17

⌀17

19

19.1

20

⌀20

21

⌀21

22

⌀22

22.1

23

23.8

25

⌀25

25.1

25.4

28

30

⌀30

30.1

32

38

40

⌀40

45

50

⌀50

60

75

80

100

125
Clear

Width(mm)
1.5

2

3

3.5

4

5

05

6

7

8

9

10

11

12

13

14

15

15,18,20

16

17

18

19

20

21

22

23

24

25

26

27

30

32

35

40

45

50

60

150
Clear

Shaft Diameter(mm)
1.3

⌀1.3

2.34

⌀2.34

3

⌀3.0

3.2

6

⌀6.0

6.3

6.35

10

13
Clear

Particle Size(#)
10,000

36

40

60

80

80、120、220

100

100/240/400/800/1500/3000

120

150

180

200

240

240 equivalent

320

400

600

800

1000

1500

3000

Hard

Soft

Super hard
Clear

Stationary Diameter(mm)
10

15

20

25

30

40

50
Clear

Screw Hole Diameter(mm)
3

M3

Screw: M3

6

M6

M7(P0.75)
Clear

Narrow search by specifying Brand

- MISUMI (4)
- Cost Efficient Products ()
- ICHIGUCHI (28)
- NAKANISHI (22)
- TRUSCO NAKAYAMA (22)
- YANASE (12)
- MINITOR (9)
- NIHON SEIMITSU KIKAI KOSAKU (4)
- MURAKO (4)
- KURODA BRUSH (3)
- OFFICE MINE (3)
- SUMFLEX (3)
- DREMEL (2)
- SUN POWER(TAIYO SHOKAI) (2)
- H & H (1)
- NEWREGISTON (1)
- UHT (1)
Clear

Narrow search by specifying CAD data type

- 2D
- 3D
Clear

YANASE Wheels with Shafts（Application：Polishing）

Flap Wheels with Shaft

Unilon Wheel with Shaft (Hard)

Unilon Wheel with Shaft

Cup Disc

Flap With Mugen Shaft

Cushioning Cone

Cushioning Cone Holder

Single-Action Top with Shaft

Flexible Shaft 1

Flexible Shaft 2

Flap Wheels with Shaft

NEO Flap Wheel, P Type

Filter by:

Narrow search by specifying spec./dim.

Application

Type

Material

Outer Diameter(mm)

Width(mm)

Shaft Diameter(mm)

Particle Size(#)

Stationary Diameter(mm)

Screw Hole Diameter(mm)

Narrow search by specifying Brand

Narrow search by specifying CAD data type

Categories related to Wheels with Shafts

Způsob platby

Výroba na vyžádání

Změnit zobrazení

Certifikáty

MISUMI ve světě

Sociální média

Právní upozornění