YUKIWA SEIKO Tooling-Related Equipment

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

Manual-Type Tailstock

YUKIWA SEIKO

The pneumatic tailstock TSA/TSB series is a manual type basic tailstock (press cup). For machining 60°center holes close to the end face of a workpiece.

Starting from^∗ ：	598.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Side Spindle

YUKIWA SEIKO

[Features]
· Use side spindle SS series to support one end of the jig when performing multi-surface machining with a C-type jig.

Starting from^∗ ：	1,644.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Pneumatic Tailstock

YUKIWA SEIKO

The pneumatic tailstock TPA/TPB series is an air-driven type basic tailstock (press cup).

Starting from^∗ ：	2,076.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Chuck Flange

YUKIWA SEIKO

[Features]
· For the chuck flange CF series, install the chuck flange between the table surfaces if attaching the scroll chuck to the CNC circular table or index plate.

Starting from^∗ ：	137.28 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lock Nut

YUKIWA SEIKO

[Features]
This product pursues high performance and high quality.
Compatible collets: SG6,SG8,SG10,SG12,SG16,SG20,SG25,SG32
-Compatible spanners: FS20,FS26,FS33,FS36,FS42,FS50,FS62,FS76.

Volume Discount

Starting from^∗ ：	63.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super G1 Chuck Runout Adjuster Zero Finder

YUKIWA SEIKO

Supports a standard holder and achieves zero adjustment of the blade tip runout accuracy.

[Features]
· A controller that reduces cutting edge runout to effectively zero for the high accuracy Super G1 Chuck.
· Zerodas is a revolutionary product that does not sacrifice the balance of the holder and vibration of the blade base to ensure vibration of the cutting edge.
· Achieves zero cutting edge runout accuracy.
· Standard holder supported.
· Simple Operation, Attaching and Detaching

Starting from^∗ ：	317.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

NY Lock Nut

YUKIWA SEIKO

[Features]
A NY-H type lock nut for EY tool holder.
-Type: M-type / H-type / F-type
-Supported collets: EY11,EY12,EY16,EY20,EY25,EY32

Volume Discount

Starting from^∗ ：	76.77 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Pull Stud

YUKIWA SEIKO

JBS and MAS standard draw studs.
The shape of the draw stud is manufactured to JIS and MAS standards.
Special sizes not listed above can be manufactured.

Volume Discount

Starting from^∗ ：	34.91 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Manual Locking System YHL-C For HSK Holder

YUKIWA SEIKO

[Features]
· Clamping and unclamping can be performed with a 120° rotation operation, enabling single-action holder replacement.

Starting from^∗ ：	1,746.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Manual Type Index Heads

YUKIWA SEIKO

High precision and speedy one-touch operation. Powerfully supports labor-saving.

Starting from^∗ ：	2,108.87 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Collet Adapter

YUKIWA SEIKO

It is easy to open and close the chuck. Simply insert the attached lever into the hole of the cap outer diameter and turn it. Easy to attach and detach workpieces.

Starting from^∗ ：	250.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

YUKIWA SEIKS Spring Collet

YUKIWA SEIKO

[Features]
· The spring collet YSS series easily and accurately chucks round workpieces in machining that uses a circular table or indexing table.

Starting from^∗ ：	111.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flanged Center

YUKIWA SEIKO

[Features]
· Can be easily used by attaching to a round table or index head table surface.

Starting from^∗ ：	339.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Wrench for Coolant Seal Screw

YUKIWA SEIKO

[Features]
-Coolant seal screw spanner compatible with CSE/CSH type.

Starting from^∗ ：	19.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Coolant Seal Screw

YUKIWA SEIKO

For Super G1 Chuck

[Features]
· Supports high pressure coolant with a coolant seal screw as part of the set

Starting from^∗ ：	52.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Length Adjustment Screw

YUKIWA SEIKO

For Super G1 Chuck

[Features]
· Absorbs tool inclination and provides stable runout accuracy by setting an APM type length adjustment screw

Volume Discount

Starting from^∗ ：	31.34 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Wrench for Length Adjustment Screw

YUKIWA SEIKO

[Features]
6 types of keys for coolant seal screws / length adjustment screws (APM type).
Compatible screws: APM6,APM8-1 (2)/APM10-1 (2)/APM12-1 (2)/APM16-1 (2),APM20-1 (2)/APM25-1 (2)/APM32

Starting from^∗ ：	23.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Hook Wrench

YUKIWA SEIKO

[Features]
This product pursues high performance and high quality.
Compatible main bodies: SGC6,SGC8,SGC10,SGC12,SGC16,SGC20,SGC25,SGC32
-Compatible lock nuts: SGN6,SGN8,SGN10,SGN12,SGN16,SGN20,SGN25,SGN32.

Starting from^∗ ：	13.67 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Coolant Duct

YUKIWA SEIKO

[Features]
-Coolant channel for HSK holder
[Features]
-Use by mounting in HSK shaft as coolant supply when using through coolant.

Starting from^∗ ：	89.31 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Coolant Duct Set Wrench

YUKIWA SEIKO

[Features]
Special accessories for HSK holders
2 types for HISO-TC90 Equiv.0A-SR/HEN 1.1625 Equiv.3A-SR

Starting from^∗ ：	134.28 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tool Clamp

YUKIWA SEIKO

[Features]
Special accessories for HSK holder
Main body can be fixed vertically or horizontally.

Starting from^∗ ：	372.93 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flange Holder Clamp Set

YUKIWA SEIKO

Clamping and unclamping can be done with a 120° rotation and the holder interchanged with a single action.

Starting from^∗ ：	1,431.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lock Nut Cover

YUKIWA SEIKO

[Features]
· Prevents adhesion of chips etc. on the screws of the holder body.
· Prevents oil scattering from groove portion of lock nut wrench

Starting from^∗ ：	22.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Wrench

YUKIWA SEIKO

[Features]
9 types of spanners for EY tool holder.
-Type: EFS,EKS.

Starting from^∗ ：	20.71 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Length Adjustment Screw with Sealing

YUKIWA SEIKO

[Features]
· A length adjustment screw with a urethane end face seal resistant to water-soluble and oil-based cutting fluids is incorporated, enabling processing without losing oil pressure.
· Replacing the length adjustment screw included in the BT shank, the EY chuck, and other standard components with this length adjustment screw plus seal allows lubrication to be sealed from the rear.
· Covers 5 mm or more oil hole drills: Ends of 5 to 20 mm oil hole drills can be sealed, enabling support of small diameter oil hole drills as well

Starting from^∗ ：	22.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Single-Ended Wrench

YUKIWA SEIKO

[Features]
Single spanner included with cutter
Available for PCH6, PCH10.

Starting from^∗ ：	25.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Pull Stud (with Center Hole)

YUKIWA SEIKO

Pull stud dedicated for center through type machining center.

[Features]
· Pull stud dedicated for center through type machining center

Volume Discount

Starting from^∗ ：	46.59 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Chuck Handle

YUKIWA SEIKO

For drill chuck

Volume Discount

Starting from^∗ ：	9.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Wrench with Torque Limiter

YUKIWA SEIKO

Since the recommended torque has been set, lock nuts will not be overtightened.

Starting from^∗ ：	217.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Locking Part

YUKIWA SEIKO

[Features]
Yukiwa Seiko, Tooling holder related equipment, locking parts (TQC25-SLP, TQC35-SLP)

Starting from^∗ ：	451.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Product Category
Applicable Manufacturing Machinery (main unit)
Spindle types
HSK type
Tool Type
Retainable blade diameter(mm)
Holder Length L(mm)
Coolant System

							Promotional pricing ends 30/11/2024	Promotional pricing ends 30/11/2024								Promotional pricing ends 30/11/2024		Promotional pricing ends 30/11/2024						Promotional pricing ends 30/11/2024
Brand	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO	YUKIWA SEIKO
Product Series	Manual-Type Tailstock	Side Spindle	Pneumatic Tailstock	Chuck Flange	Lock Nut	Super G1 Chuck Runout Adjuster Zero Finder	NY Lock Nut	Pull Stud	Manual Locking System YHL-C For HSK Holder	Manual Type Index Heads	Collet Adapter	YUKIWA SEIKS Spring Collet	Flanged Center	Wrench for Coolant Seal Screw	Coolant Seal Screw	Length Adjustment Screw	Wrench for Length Adjustment Screw	Hook Wrench	Coolant Duct	Coolant Duct Set Wrench	Tool Clamp	Flange Holder Clamp Set	Lock Nut Cover	Wrench	Length Adjustment Screw with Sealing	Single-Ended Wrench	Pull Stud (with Center Hole)	Chuck Handle	Wrench with Torque Limiter	Locking Part
Starting from^∗	598.66 € *Unit price with basic configuration	1,644.92 € *Unit price with basic configuration	2,076.10 € *Unit price with basic configuration	137.28 € *Unit price with basic configuration	63.17 € *Unit price with basic configuration Volume Discount	317.80 € *Unit price with basic configuration	76.77 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	34.91 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	1,746.26 € *Unit price with basic configuration	2,108.87 € *Unit price with basic configuration	250.83 € *Unit price with basic configuration	111.94 € *Unit price with basic configuration	339.23 € *Unit price with basic configuration	19.34 € *Unit price with basic configuration	52.79 € *Unit price with basic configuration	31.34 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	23.14 € *Unit price with basic configuration	13.67 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024	89.31 € *Unit price with basic configuration	134.28 € *Unit price with basic configuration	372.93 € *Unit price with basic configuration	1,431.04 € *Unit price with basic configuration	22.60 € *Unit price with basic configuration	20.71 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024	22.69 € *Unit price with basic configuration	25.80 € *Unit price with basic configuration	46.59 € *Unit price with basic configuration Volume Discount	9.85 € *Unit price with basic configuration Volume Discount	217.54 € *Unit price with basic configuration	451.19 € *Unit price with basic configuration
Min. Shipping Days ：	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Product Category	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Main Body	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories
Applicable Manufacturing Machinery (main unit)	-	-	-	-	-	-	-	-	Machining Centers	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Spindle types	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	HSK-A	HSK-A	-	-	-	-	-	-	-	-	-	-
HSK type	-	-	-	-	-	-	-	-	63	-	-	-	-	-	-	-	-	-	40 ～ 63	40 ～ 63	-	-	-	-	-	-	-	-	-	-
Tool Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Retainable blade diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holder Length L(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Coolant System	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Product Category
- Main Body
- Attachments/Accessories
Clear

Applicable Manufacturing Machinery (main unit)
- Machining Centers
- Generic Machine
Clear

Spindle types
- BT30
- BT40
- BT50
- HSK-A
- HSK-E
Clear

HSK type
25

32

40

50

63

100
Clear

Tool Type
- Drill
- Reamer
Clear

Retainable blade diameter(mm)
3

3~3.5

3–4

4

4~4.5

4–5

5

5～5.5

5–6

6

6 to 6.5

6–7

7

7～7.5

7–8

8

8~8.5

8–9

9

9～9.5

9–10

10

10～10.5

10~11

11

11～11.5

11~12

12

12～12.5

12~13

13～14

14~15

15~16

16～17

16.5

17～18

18

18~19

19～20

20

22

23

38

39
Clear

Holder Length L(mm)
20

25

43

44.1

50

53

54

54.6

60

74

85

95

150

162.5

164.5

169

180.5

182.5

186.5

193.5

200

335
Clear

Coolant System
- Center Through (Blade Through)
Clear

Narrow search by specifying Brand

- AMF (44)
- BIG KAISER (35)
- YUKIWA SEIKO (30)
- ESCO (17)
- TRUSCO NAKAYAMA (15)
- TAKURA KOGU (15)
- MANYO TOOLS (11)
- NORELEM (5)
- SHOWA TOOL (5)
- THE CUT (5)
- NIKKEN KOSAKUSHO (2)
- NT TOOL (2)
- NEW STRONG (2)
- GIGA SELECTION (1)
- SKC (1)
Clear