Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Shaft end shape (left)
  • Shaft end shape (right)
  • Spline shaft outer diameter D(φ)
  • CAD
  • Spline Shaft

    Splines are parts that transmit power through the movement of interlocking grooved rotary shafts. Since splines transmit power by meshing together many tooth surfaces, they have superior load transmission ability and alignment relative to fasteners such as screws, pins, keys or mechanical locks. The main types of splines are square splines (with linear and parallel groove side surfaces), involute splines (with zig-zag tooth shapes in circular arrangements) and ball splines (that generate linear motion from rolling steel balls placed in the grooves). Splines that can transmit large torques are used in a variety of mechanisms such as automotive and high-speed rolling stock transmissions, propeller shafts, transportation equipment and machine tools. There are a wide range of applications, so an extensive lineup of product types and shapes are available.
      • Ball Splines / Standard

          MISUMI

          Ball Splines / Standard

          Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
          With key type / Flange TypeStandardStandardSolid6 ~ 30.8Medium TorqueEN 1.3505 Equiv. / Stainless Steel (EN 1.4125 Equiv.)1 ~ 2Standard
          Běžné datum odeslání:
          9 pracovních dnů
          Konfigurovat
        • Toothed Shafts DIN 5480
          • Volume Discount

          MAEDLER

          Toothed Shafts DIN 5480

          Material: Steel C45, milled. Toothed shafts with profile DIN 5480, toothed on the complete length. For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding hubs and flanged hubs DIN 5480. Module 1.25. Pressure angle 30°.Tolerance 8f.
          Více informací
          Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
          ---------
          Cena (bez DPH) od:
          711.36 €
          Běžné datum odeslání:
          4 pracovních dnů
          Konfigurovat
        • Hubs for Toothed Shafts DIN 5480
          • Volume Discount

          MAEDLER

          Hubs for Toothed Shafts DIN 5480

          Material: Steel 16MnCr5.Sleeves for toothed shafts with profile DIN 5480. For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding shafts DIN 5480. Module 1.25. Pressure angle 30°.Tolerance 9H.
          Více informací
          Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
          ---------
          Cena (bez DPH) od:
          49.09 €
          Běžné datum odeslání:
          4 pracovních dnů
          Konfigurovat
        • Ball Splines / One End Stepped

            MISUMI

            Ball Splines / One End Stepped

            Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
            With key type / Flange TypeSteppedStandardSolid6 ~ 30.8Medium TorqueEN 1.3505 Equiv. / Stainless Steel (EN 1.4125 Equiv.)1 ~ 2Standard
            Běžné datum odeslání:
            9 pracovních dnů
            Konfigurovat
          • Ball Splines / Both Ends Tapped

              MISUMI

              Ball Splines / Both Ends Tapped

              Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
              With key type / Flange TypeFemale ThreadFemale ThreadSolid6 ~ 30.8Medium TorqueEN 1.3505 Equiv. / Stainless Steel (EN 1.4125 Equiv.)1 ~ 2Standard
              Běžné datum odeslání:
              9 pracovních dnů
              Konfigurovat
            • Economy Ball Spline Double Type

                NSB

                Economy Ball Spline Double Type

                [Features]· Can transmit torque while performing linear motion.· A compact and affordable ball spline.* Stickers are applied to both sides.
                Více informací
                Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                Flange TypeStandardStandard-30.8High TorqueEN 1.3505 Equiv.-Long
                Běžné datum odeslání:
                21 pracovních dnů
                Konfigurovat
              • Ball Splines / Both Ends Tapped

                  MISUMI

                  Ball Splines / Both Ends Tapped

                  Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                  With key type / Flange TypeFemale ThreadStandardSolid6 ~ 30.8Medium TorqueEN 1.3505 Equiv. / Stainless Steel (EN 1.4125 Equiv.)1Standard
                  Běžné datum odeslání:
                  9 pracovních dnů
                  Konfigurovat
                • Needle Bearing Guide Sets

                    MISUMI

                    Needle Bearing Guide Sets

                    Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                    ---Polygonal axis6 ~ 16----
                    Běžné datum odeslání:
                    9 pracovních dnů
                    Konfigurovat
                  • Spline Nut
                    • SLEVA
                    • Volume Discount

                    THK

                    Spline Nut

                    The nut and shaft are sold separately. Use together with THK nuts and shafts (DPM, DP, SS). The shaft is cut with no surface treatment.[Features]· The spline nut DPM type / DP type is a low-priced bearing where a special alloy has been die cut with a high precision splint shaft as the core.· Differs from conventional machine processed units, and has excellent abrasion resistance due to there still being the same chill layers that were formed on the sliding surface during the casting process.· The spline shaft used in combination with this can be roll-pressed to machine harden the surface, and provide the surface with a mirror surface finish, to achieve smooth sliding.· The spline cog has a special design with a large contact area and has concentricity that can automatically determine core when torque is incurred, so the torque...
                    Více informací
                    Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                    -StandardStandardPolygonal axis-----
                    Cena (bez DPH) od:
                    29.06 €
                    Speciální cena
                    Běžné datum odeslání:
                    Skladová položka: 1 pracovní den
                    Některé položky lze dodat ve stejný den
                    Konfigurovat
                  • Miniature Hexagonal Spline Single Nut (HTK) / Double Nut (HTKW) Series

                      OZAK

                      Miniature Hexagonal Spline Single Nut (HTK) / Double Nut (HTKW) Series

                      Miniature sizes (hexagonal shaft 3, 4, 5) are now standardized[Features]· Achieve reduced weight and smaller sizer for the machinery and devices· The resin nut (PPS resin) can be combined with the stainless steel shaft (SUS304) to obtain excellent corrosion resistance, which allows it to be used in a wide variety of environments.· The line up also includes standard products with non-backlash specifications (W series).
                      Více informací
                      Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                      Flange TypeStandardStandardPolygonal axis-Medium TorqueStainless Steel (EN 1.4301 Equiv.)-Standard
                      Běžné datum odeslání:
                      11 pracovních dnů
                      Konfigurovat
                    • One End Threaded / One End Stepped and Threaded / One End Tapped

                        MISUMI

                        One End Threaded / One End Stepped and Threaded / One End Tapped

                        Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                        With key type / Flange TypeStepped and ThreadedFemale ThreadSolid6 ~ 30.8Medium TorqueEN 1.3505 Equiv. / Stainless Steel (EN 1.4125 Equiv.)1 ~ 2Standard
                        Běžné datum odeslání:
                        9 pracovních dnů
                        Konfigurovat
                      • Flange Type Ball Spline LBF Type

                          THK

                          Flange Type Ball Spline LBF Type

                          Utilizes a flange to fixate the housing using a bolt, which makes assembly easy. Ideal for housings with small widths or where there are concerns of deformation associated with machining key grooves into the housing.
                          Více informací
                          Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                          Flange TypeStandardStandardSolid-High Torque-1 ~ 5Standard
                          Běžné datum odeslání:
                          35 pracovních dnů
                          Konfigurovat
                        • Flanged Hubs for Toothed Shafts DIN 5480
                          • Volume Discount

                          MAEDLER

                          Flanged Hubs for Toothed Shafts DIN 5480

                          Material: Steel C45.Flanged bolt-on hubs, for toothed shafts with profile DIN 5480. For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding shafts DIN 5480. The positon of the bore holes does not refer to the toothing. Module 1.25. Pressure angle 30°.Tolerance 9H.
                          Více informací
                          Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                          ---------
                          Cena (bez DPH) od:
                          92.57 €
                          Běžné datum odeslání:
                          4 pracovních dnů
                          Konfigurovat
                        • Splined shafts similar to DIN ISO 14 (24010)

                            NORELEM

                            Splined shafts similar to DIN ISO 14 (24010)

                            · Transmission of high torques while enabling simultaneous axial movement· Uninterrupted grain flow due to cold drawing· High strength
                            Více informací
                            Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                            ---------
                            Cena (bez DPH) od:
                            23.16 €
                            Běžné datum odeslání:
                            4 pracovních dnů
                            Konfigurovat
                          • Ball Splines / Both Ends Stepped

                              MISUMI

                              Ball Splines / Both Ends Stepped

                              Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                              With key type / Flange TypeSteppedSteppedSolid6 ~ 30.8Medium TorqueEN 1.7242 Equiv. / Stainless Steel (EN 1.4125 Equiv.)1Standard
                              Běžné datum odeslání:
                              9 pracovních dnů
                              Konfigurovat
                            • Flange Type Ball Spline LF Type

                                THK

                                Flange Type Ball Spline LF Type

                                Utilizes a flange to fixate the housing using a bolt, which makes assembly easy. Ideal for housings with small widths or where there are concerns of deformation associated with machining key grooves into the housing.
                                Více informací
                                Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                                Flange TypeStandardStandardSolid / Hollow / Hollow (thin)-Medium Torque-1 ~ 5Standard
                                Běžné datum odeslání:
                                20 pracovních dnů
                                Konfigurovat
                              • Ball Splines / Both Ends Stepped and Threaded

                                  MISUMI

                                  Ball Splines / Both Ends Stepped and Threaded

                                  Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                                  With key type / Flange TypeStepped and ThreadedStepped and ThreadedSolid6 ~ 30.8Medium TorqueEN 1.3505 Equiv. / Stainless Steel (EN 1.4125 Equiv.)1Standard
                                  Běžné datum odeslání:
                                  9 pracovních dnů
                                  Konfigurovat
                                • Ball Splines / Both Ends Stepped Tapped

                                    MISUMI

                                    Ball Splines / Both Ends Stepped Tapped

                                    Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                                    With key type / Flange TypeStepped and TappedStepped and TappedSolid8 ~ 30.8Medium TorqueEN 1.3505 Equiv. / Stainless Steel (EN 1.4125 Equiv.)1Standard
                                    Běžné datum odeslání:
                                    9 pracovních dnů
                                    Konfigurovat
                                  • Splined shafts, T5 profile (22007)

                                      NORELEM

                                      Splined shafts, T5 profile (22007)

                                      · Standard T-profile acc. to DIN 7721 T2· Trapezoidal toothing with metric pitch· For manufacturing your own toothed wheels
                                      Více informací
                                      Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                                      ----15.05 ~ 158.31----
                                      Cena (bez DPH) od:
                                      22.02 €
                                      Běžné datum odeslání:
                                      4 pracovních dnů
                                      Konfigurovat
                                    • Splined shafts, T10 profile (22007)

                                        NORELEM

                                        Splined shafts, T10 profile (22007)

                                        · Standard T-profile acc. to DIN 7721 T2· Trapezoidal toothing with metric pitch· For manufacturing your own toothed wheels
                                        Více informací
                                        Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                                        ----29.98 ~ 227.29----
                                        Cena (bez DPH) od:
                                        32.60 €
                                        Běžné datum odeslání:
                                        4 pracovních dnů
                                        Konfigurovat
                                      • NXO Slide
                                        • SLEVA
                                        • Volume Discount

                                        MIYOSHI KIKAI

                                        NXO Slide

                                        NX material: S-45C, OX material: STKM-13. Easy to re-position without rotating, and can cut at any position together with the sleeve shaft.[Features]· Easy to re-position without rotating.· Rotation transmission and expansion functionality.· Can cut at any position together with the sleeve shaft.
                                        Více informací
                                        Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                                        ---Polygonal axis-----
                                        Cena (bez DPH) od:
                                        21.85 €
                                        Speciální cena
                                        Běžné datum odeslání:
                                        Skladová položka: 1 pracovní den
                                        Některé položky lze dodat ve stejný den
                                        Konfigurovat
                                      • Splined shafts, AT5 profile (22008)

                                          NORELEM

                                          Splined shafts, AT5 profile (22008)

                                          · Standard AT profile · Trapezoidal toothing with metric pitch· For manufacturing your own toothed wheels
                                          Více informací
                                          Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                                          ----17.85 ~ 113.25----
                                          Cena (bez DPH) od:
                                          29.77 €
                                          Běžné datum odeslání:
                                          4 pracovních dnů
                                          Konfigurovat
                                        • Ball Splines / One End Stepped and Threaded

                                            MISUMI

                                            Ball Splines / One End Stepped and Threaded

                                            Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                                            With key type / Flange TypeStepped and ThreadedStandardSolid6 ~ 30.8Medium TorqueEN 1.3505 Equiv. / Stainless Steel (EN 1.4125 Equiv.)1Standard
                                            Běžné datum odeslání:
                                            9 pracovních dnů
                                            Konfigurovat
                                          • Toothed Shafts DIN 5480, Toothed on Partial Length
                                            • Volume Discount

                                            MAEDLER

                                            Toothed Shafts DIN 5480, Toothed on Partial Length

                                            Material: Steel C35K, milled.Toothed shafts with profile DIN 5480, toothed on partial length L1, with onesided solid shaft end. For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding hubs and flanged hubs DIN 5480. The smooth shaft ending with diameter tolerance h6 can be used as bearing seat.Module 1.25. Pressure angle 30°.Tolerance 8f.
                                            Více informací
                                            Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                                            ----14.75 ~ 24.75----
                                            Cena (bez DPH) od:
                                            100.16 €
                                            Běžné datum odeslání:
                                            4 pracovních dnů
                                            Konfigurovat
                                          • Splined shafts, AT10 profile (22008)

                                              NORELEM

                                              Splined shafts, AT10 profile (22008)

                                              · Standard AT profile · Trapezoidal toothing with metric pitch· For manufacturing your own toothed wheels
                                              Více informací
                                              Nut typeShaft end shape (left)Shaft end shape (right)TypeSpline shaft outer diameter D(φ)TorqueShaft materialNumber of nuts(pcs.)Nut length
                                              ----45.9 ~ 220.95----
                                              Cena (bez DPH) od:
                                              65.51 €
                                              Běžné datum odeslání:
                                              4 pracovních dnů
                                              Konfigurovat