Indexing Plungers（Page 2）

Filter products by: Type

537

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Index Bolt With Mounting Flange, Horizontal

HALDER

[Features]
· Use washers (For example, ISO7092) for mounting.
· On types with locks, rotate the knob 90 degrees to stop the notch moving.
On types with holding mechanisms, pull the knob and rotate it approximately 70 degrees to keep the pin in its withdrawn state.
· Operating temperature range: -30 to +80°C.
· Up to 100°C on types with rings.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.10 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Index Plungers, Mini Indexes, Basic Type

HALDER

[Features]
· Small index bolts are particularly well suited for mounting to thin objects.
· On items with hold mechanisms, pull out the knob and rotate it 30° to hold.
· Operating temperature range: -30 to 80°C.
· Mounting method: screw in the screw area on the main body, then lift up the knob and use the hexagonal section to tighten it.
· Increased screw size.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.70 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Index Bolt Without Hexagon Collar

HALDER

[Features]
· For index holes.
· Operating temperature range: -30 to +80°C.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.63 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Index Bolt With Hexagon Collar Locking / Standard knob / Screw-In / EH 22120

HALDER

[Features]
· For index holes.
· Pull the knob and rotate 90 degrees to fix the pin in place in a withdrawn state using the notch.
· Operating temperature range is from -30 to +80°C.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	11.25 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Stainless Steel, with knob, with and without rest position

GANTER

GN 717 Stainless Steel-Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.52 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit

GANTER

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.08 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plungers Form R (03092)

NORELEM

· Indexing plungers facilitate indexing and locking

· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use

· High stability

· Key ring to operate the indexing plungers

· Material: steel or stainless steel

Select to compare

Configure now
Starting from^∗ ：	6.25 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Indexing Plungers / Switch Lever / Fine Thread

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	39.04 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Indexing Plungers / Resin Knob

MISUMI

[Features] The pin can be pushed in and out manually with a knob or lever. Suitable for temporary positioning of workpieces.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	18.00 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Index Bolt With Hexagon Collar 22120

HALDER

[Features]
· For index holes.
· Operating temperature range is from -30 to +80°C.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.70 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Mounting Block For Index Plungers And Bolts

HALDER

[Features]
· Can be used for mounting external diameter screw M12, M16 and M20 index bolts, and for expanding their applications.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	15.53 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Index Bolts Simple Finish

HALDER

[Features]
· Simple shape that does not require much space.
· Only for use in situations that do not require a high degree of precision.
· Operating temperature range: from -30 to +80°C, and up to +250°C on types with rings.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.15 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Cam action indexing plungers, Steel, with locking function

GANTER

The groove on GN 721.1 cam action indexing plungers ensures that the locking pin remains in its withdrawn position.
For opposing cam action indexing plungers the left or right-handed types allow practical use, that is the same setting of the lock.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	18.28 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Indexing plungers with T-Handle

GANTER

Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	9.50 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Locking plungers, PUSH-PUSH locking mechanism

GANTER

The indexing pin in the locking plungers GN 514 is moved via a so-called cardioid mechanism.

This mechanism means that the indexing pin is both extended and retracted alone by pressing the operating button (PUSH-PUSH locking mechanism).

Please note that the indexing pin cannot absorb any axial forces and that it retracts virtually by spring action; the indexing pin must therefore remain free and easy to move.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.76 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Spring bolts, Steel / Plastic knob

GANTER

The plunger of the spring bolts GN 313 does not protrude in the inoperative position.
It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	9.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Indexing plungers with long plastic knob

GANTER

Stainless Steel-Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.28 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

PMT.200 - Lever indexing plungers -Rest position SUPER-technopolymer body

ELESA

Lever indexing plungers with rest in retracted position with threaded body in glass fibre reinforced polyamide-based SUPER-technopolymer, plunger in hardened and burnished steel or AISI 303 stainless steel, glass fibre reinforced polyamide-based self-lubricating technopolymer lever, AISI 302 stainless steel spring and fibre reinforced polyamide-based SUPER-technopolymer locking nut.
They are used when a rapid backward movement of the plunger is required.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.91 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plungers stainless steel Form A (03089)

NORELEM

Select to compare

Configure now
Starting from^∗ ：	18.06 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Indexing Plungers, PBX

NABEYA BI-TECH

Indexing plungers integrated with a mounting flange. Suitable for mounting to panel surfaces on equipment/devices, etc.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	17.32 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Plungers

TOSHIN CASTER

Simple, sturdy structure for easy, safe locking/unlocking. Optimal for equipment that performs positioning or height adjustment.

[Features]
- Lever-type indexing plunger with simple structure, high strength, and safe design.
- When locked, the design prevents it from coming off due to accidental shock or contact.
- When unlocked, the lever can be pulled up, retracted, and retained on the opposite side.
- Whether locked or unlocked, the lever will not get in the way.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Index Plungers For Thin-Walled Pieces

HALDER

[Features]
· Index bolt for through holes in thin sheets.
· A fixing sleeve can be used to mount sheets 1 to 5 mm thick
· For types with locks, pulling the knob and rotating it 90 degrees locks the mechanism with the notch.
· For this element, depending on the thickness of the opposing part, the pin may not fit fully into the notch, even if the knob is pulled all the way out.
· Operating temperature range: from -30 to +80°C.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.08 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Index Bolts With Flange

HALDER

[Features]
· For index holes.
· With flanges for mounting in a horizontal position.
· Mounting holes feature double grease seals and thus can be mounted in both directions.
· The operating temperature range of the plastic cap is from -30 to +80°C.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	33.40 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Spring latches with flange for surface mounting / GN 722.2

GANTER

Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	13.78 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Stainless Steel-Spring latches with flange for surface mounting

GANTER

Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	31.88 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing plunger stainless steel with remote actuation (K1502)

KIPP

[Specifications]
・Locknut: with locknut
・Body Material: Stainless Steel

[Features]
・Actuation possible in inaccessible assembly spaces
・Ergonomically optimised actuating position possible
・Actuation possible even when safety distances are required
・Easy replacement of wear parts
・Flexible connection of an actuating element

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	39.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Indexing plungers Form D (K0338)

KIPP

· Indexing plungers facilitate indexing and locking

· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use

· High stability

· Easy handling

· Material: steel or stainless steel

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	8.81 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Indexing Plunger PXX

NABEYA BI-TECH

Indexing or positioning pin. Good abrasion resistance.

[Features]
- Indexing or positioning pin.
- New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
- If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
- Use a locking service for fixing indexing plungers.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	19.55 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Index Plunger (With No Knob) (SDX-N)

IMAO CORPORATION

The operating unit can be remotely operated by connecting with screws. There is no hexagonal part so it can be mounted in a small space. Available in steel and stainless steel.

[Features]
- A hand operated spring plunger where you pull the knob and the nose retracts to easily release the positioning, while if the knob is released, it reverts to the original state by the force of the internal spring.
- If performing remote operation, it can be joined with the operation screw part.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	17.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Index Plunger (Nose Lock Model) (NDXN-L-ASUS)

IMAO CORPORATION

This has the nose-locking style that keeps the pin in a retracted state. It is all made of stainless steel so it is optimal for locations requiring rust resistance and for use in clean environments. It is available in two types, the nose hardening type and no-bake type.

[Features]
- It is a hand operated index plunger. Pull the knob and the nose retracts and the position release is easily done, let go of the knob and the nose returns to the original state by the force of the internal spring.
- The nose locking type can be locked (fixed) by rotating the knob 90° while it is pulled and the nose is retracted.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	46.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Indexing Plungers Flange Type IPF

KONISHI MFG

Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. An index plunger with a fixed countersunk screw.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	33.74 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Locking plungers, Plunger protruded

GANTER

If not operated, the plunger of the locking plungers GN 816 protrudes. To retract, move against the spring force and hold in the end position by turning by 90°.
The shape of the cam curve secures the plunger against accidental operation.
When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	19.58 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Mini indexing plungers Zinc die casting / Plastic-knob

GANTER

Mini indexing plungers GN 822.8 are distinguished for their small dimensions. They are mounted by countersunk screws.
The mini indexing plungers present an affordable alternative to the GN 608 and GN 608.1 indexing plungers.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.24 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Mini indexing plungers, Stainless Steel / Plastic knob

GANTER

Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Spring latches for welding / GN 722.1

GANTER

Stainless Steel-Spring latches GN 722.1 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
The square bar allows the latch to be welded in any desired position. To prevent excessive heating up and the resulting change in the spring properties, fixing with welding spots is recommended.
Stainless Steel-Spring latches GN 722.1 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	28.38 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Promotional pricing

PMT.101 - Indexing plungers -Rest position SUPER-technopolymer body

ELESA

Indexing plungers with rest in retracted position with threaded body in glass fibre reinforced polyamide-based SUPER-technopolymer, plunger in hardened and burnished steel or AISI 303 stainless steel, knob in high-resilience polyamide-based technopolymer in black or red RAL 3000, spring in stainless steel AISI 302 and locking nut in glass fibre reinforced polyamide-based SUPER-technopolymer.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.32 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Positioning Bushings, for index bolts and index plungers

HALDER

Positioning bushings are suitable for index plungers and index bolts.
Low wear thanks to hardened running ball.

Select to compare

Configure now
Starting from^∗ ：	6.62 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Indexing plungers (K0340)

KIPP

[Specifications]
・Body Material: Steel

[Features]
・Indexing plungers facilitate indexing and locking
・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
・High stability

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.60 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Indexing plungers Form E (K0341)

KIPP

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.04 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Indexing plungers with extended pin Form B (03089)

NORELEM

Select to compare

Configure now
Starting from^∗ ：	8.83 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Indexing plungers, short version, Form A (03089)

NORELEM

· Indexing plungers facilitate indexing and locking

· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use

· High stability

· Ideal where space is restricted:

· Material: steel or stainless steel

Select to compare

Configure now
Starting from^∗ ：	9.00 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Indexing plunger with cam lever steel or stainless steel, Form A (03090)

NORELEM

· Simple and quick operation

· Suitable for high temperature applications

· With integrated detent function

Select to compare

Configure now
Starting from^∗ ：	12.48 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Indexing plunger with cam lever steel or stainless steel, Form B (03090)

NORELEM

· Simple and quick operation

· Suitable for high temperature applications

· With integrated detent function

Select to compare

Configure now
Starting from^∗ ：	12.64 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Indexing plungers pneumatic (03095)

NORELEM

· Indexing plungers facilitate indexing and locking

· Application sectors: machine, instrument and fixture construction, measuring technology

· High stability

· Automatable

· Application temperature: -20 °C to +80 °C

Select to compare

Configure now
Starting from^∗ ：	84.39 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Indexing plungers with grip stainless steel Form A (03099)

NORELEM

· Can be used for all types of locking and fixating

· The lock is released by turning the grip 180°

· Indexing notch for holding the position

Select to compare

Configure now
Starting from^∗ ：	18.22 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Type
Locking Mechanism
Mounting Method
Overall Length
Body Material
All Stainless
Tip Material
Body O.D./Thread M(mm)
Stroke S(mm)
Tip Surface Treatment
Tip Heat Treatment
Tip O.D. d(Ø)
Length L(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	HALDER	HALDER	HALDER	HALDER	GANTER	GANTER	NORELEM	MISUMI	MISUMI	HALDER	HALDER	HALDER	GANTER	GANTER	GANTER	GANTER	GANTER	ELESA	NORELEM	NABEYA BI-TECH	TOSHIN CASTER	HALDER	HALDER	GANTER	GANTER	KIPP	KIPP	NABEYA BI-TECH	IMAO CORPORATION	IMAO CORPORATION	KONISHI MFG	GANTER	GANTER	GANTER	GANTER	ELESA	HALDER	KIPP	KIPP	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM
Product Series	Index Bolt With Mounting Flange, Horizontal	Index Plungers, Mini Indexes, Basic Type	Index Bolt Without Hexagon Collar	Index Bolt With Hexagon Collar Locking / Standard knob / Screw-In / EH 22120	Indexing plungers, Stainless Steel, with knob, with and without rest position	Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit	Indexing plungers Form R (03092)	Indexing Plungers / Switch Lever / Fine Thread	Indexing Plungers / Resin Knob	Index Bolt With Hexagon Collar 22120	Mounting Block For Index Plungers And Bolts	Index Bolts Simple Finish	Cam action indexing plungers, Steel, with locking function	Indexing plungers with T-Handle	Locking plungers, PUSH-PUSH locking mechanism	Spring bolts, Steel / Plastic knob	Stainless Steel-Indexing plungers with long plastic knob	PMT.200 - Lever indexing plungers -Rest position SUPER-technopolymer body	Indexing plungers stainless steel Form A (03089)	Indexing Plungers, PBX	Plungers	Index Plungers For Thin-Walled Pieces	Index Bolts With Flange	Spring latches with flange for surface mounting / GN 722.2	Stainless Steel-Spring latches with flange for surface mounting	Indexing plunger stainless steel with remote actuation (K1502)	Indexing plungers Form D (K0338)	Indexing Plunger PXX	Index Plunger (With No Knob) (SDX-N)	Index Plunger (Nose Lock Model) (NDXN-L-ASUS)	Indexing Plungers Flange Type IPF	Locking plungers, Plunger protruded	Mini indexing plungers Zinc die casting / Plastic-knob	Mini indexing plungers, Stainless Steel / Plastic knob	Stainless Steel-Spring latches for welding / GN 722.1	PMT.101 - Indexing plungers -Rest position SUPER-technopolymer body	Positioning Bushings, for index bolts and index plungers	Indexing plungers (K0340)	Indexing plungers Form E (K0341)	Indexing plungers with extended pin Form B (03089)	Indexing plungers, short version, Form A (03089)	Indexing plunger with cam lever steel or stainless steel, Form A (03090)	Indexing plunger with cam lever steel or stainless steel, Form B (03090)	Indexing plungers pneumatic (03095)	Indexing plungers with grip stainless steel Form A (03099)
CAD	3D	3D	3D	3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	3D	3D	3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D		3D	3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D
Starting from^∗	5.10 € *Unit price with basic configuration	4.70 € *Unit price with basic configuration	6.63 € *Unit price with basic configuration	11.25 € *Unit price with basic configuration	5.52 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	4.08 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.25 € *Unit price with basic configuration	39.04 € *Unit price with basic configuration Volume Discount	18.00 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.70 € *Unit price with basic configuration	15.53 € *Unit price with basic configuration	0.15 € *Unit price with basic configuration	18.28 € *Unit price with basic configuration Volume Discount	9.50 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.76 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.38 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.28 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.91 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.06 € *Unit price with basic configuration	17.32 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	30.47 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	4.08 € *Unit price with basic configuration	33.40 € *Unit price with basic configuration	13.78 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	31.88 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	39.02 € *Unit price with basic configuration	8.81 € *Unit price with basic configuration	19.55 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	17.34 € *Unit price with basic configuration Volume Discount	46.02 € *Unit price with basic configuration Volume Discount	33.74 € *Unit price with basic configuration	19.58 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.24 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	28.38 € *Unit price with basic configuration Volume Discount	5.32 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.62 € *Unit price with basic configuration	5.60 € *Unit price with basic configuration	7.04 € *Unit price with basic configuration	8.83 € *Unit price with basic configuration	9.00 € *Unit price with basic configuration	12.48 € *Unit price with basic configuration	12.64 € *Unit price with basic configuration	84.39 € *Unit price with basic configuration	18.22 € *Unit price with basic configuration
Min. Shipping Days	Same day	Same day	Same day	Same day	Same day	Same day	4 Days	Same day	Same day	Same day	Same day	Same day	7 Days	Same day	Same day	Same day	Same day	Same day	4 Days	Same day	Same day	Same day	Same day	Same day	Same day	4 Days	4 Days	Same day	6 Days	6 Days	7 Days	Same day	Same day	Same day	12 Days	Same day	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days
Specifications									Order quantities extended (D-JIT)
Type	With Ring / With Vertical Flange	Standard Knob	Standard Knob / W/o Knob	Standard Knob	-	-	-	Lever Type	Standard Knob	Standard Knob / W/o Knob	-	Standard Knob / With Ring	-	-	-	-	-	-	-	Standard Knob	Lever Type	Standard Knob	Special Knobs	With Side Flange	-	-	-	Standard Knob / W/o Knob	W/o Knob	Standard Knob	Standard Knob	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Locking Mechanism	Not Provided / With Locking Nose	-	-	-	-	-	-	With Locking Nose	With Locking Nose / Without Locking Nose	-	-	-	-	-	-	-	-	-	-	Not Provided	Without Locking Nose	-	-	With Locking Nose	-	-	-	Not Provided	Not Provided	With Locking Nose	Not Provided	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Method	Flange	Screw-In	Screw-In	Screw-In	-	-	-	Screw-In	Screw-In	Screw-In	Bolt Mounting	Screw-In / Others	-	-	-	-	-	-	-	Flange	Screw-In	Screw-In / Others	Screw-In	Flange	-	-	-	Screw-In	Screw-In	Screw-In	Flange	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Overall Length	Standard	Standard	-	-	-	-	-	Standard	Short	-	-	-	-	-	-	-	-	-	-	Standard / Short	Standard	-	-	Standard	-	-	-	Standard	Standard	Standard	Short	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Body Material	Zinc Die Cast	-	-	-	Stainless Steel	Steel	Steel / Stainless Steel	Steel	Steel	-	-	-	-	-	-	-	Stainless Steel	Stainless Steel / Polyamide	Stainless Steel	Zinc Die Cast	Steel	-	-	Steel / Stainless Steel	Stainless Steel	Stainless Steel	Steel / Stainless Steel	-	Steel / Stainless Steel	Stainless Steel	Zinc Die Cast	-	-	-	Stainless Steel	Stainless Steel / Polyamide	-	Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	Stainless Steel
All Stainless	Not Compliant	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Not Compliant	Not Compliant	-	-	Applicable / Not Compliant	-	-	-	Applicable / Not Compliant	Not Compliant	Applicable	Not Compliant	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Material	Steel / Stainless Steel	-	-	-	-	-	-	Steel	Steel	-	-	-	-	-	-	-	-	-	-	-	Stainless Steel	-	-	Steel / Stainless Steel	-	-	-	-	Steel / Stainless Steel	Stainless Steel	Steel	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Body O.D./Thread M(mm)	6 ～ 20	-	-	-	-	-	-	12 ～ 20	12 ～ 16	-	-	-	-	-	-	-	-	M12 ～ M16	-	6 ～ 12	10	-	-	-	-	-	-	10 ～ 20	8 ～ 20	6 ～ 20	10 ～ 12	-	-	-	-	M10 ～ M20	-	-	-	-	-	-	-	-	-
Stroke S(mm)	4 ～ 12	-	-	-	-	-	4 ～ 10	6 ～ 10	6 ～ 8	-	-	-	-	-	-	-	-	8 ～ 10	3.5 ～ 16	4 ～ 8	-	-	-	14	-	6 ～ 12	3.5 ～ 16	5 ～ 10	4 ～ 10	3.5 ～ 10	6 ～ 18	-	-	-	-	5 ～ 10	-	9.5 ～ 25	3.5 ～ 16	5 ～ 24	3.5 ～ 10	5 ～ 10	5 ～ 10	10 ～ 15	-
Tip Surface Treatment	Not Provided / Zinc Plating	-	-	-	-	-	-	Black Oxide	Black Oxide	-	-	-	-	-	-	-	-	-	-	Not Provided	Not Provided	-	-	Not Provided / Zinc Plating	-	-	-	Not Provided / Nickel Plating	Not Provided	Not Provided	Not Provided	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip Heat Treatment	Not Provided	-	-	-	-	-	-	Hardened	Hardened	-	-	-	-	-	-	-	-	-	-	Not Provided	Not Provided	-	-	Not Provided	-	-	-	Not Provided / Hardened	Not Provided / Hardened / Carburized	Not Provided / Hardened	Not Provided	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip O.D. d(Ø)	4 ～ 12	4 ～ 10	5 ～ 10	5 ～ 10	3 ～ 10	3 ～ 10	-	6 ～ 10	6 ～ 8	5 ～ 10	M12 x 1,5 ～ M20 x 1,5	3 ～ 8	5 ～ 10	6 ～ 12	6 ～ 8	5 ～ 10	4 ～ 12	6 ～ 8	-	4 ～ 8	5	6 ～ 8	6 ～ 12	8 ～ 14	8 ～ 14	-	-	5 ～ 10	4 ～ 10	3 ～ 10	6 ～ 8	6 ～ 10	4 ～ 10	4 ～ 10	-	5 ～ 10	-	-	-	-	-	-	-	-	-
Length L(mm)	30.5 ～ 75	-	-	-	-	-	-	74 ～ 123	45 ～ 54	-	-	-	-	-	-	-	-	-	-	30.5 ～ 71	-	-	-	68	-	-	-	33 ～ 80	32 ～ 62	31.5 ～ 74	37 ～ 54	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

Locking Mechanism
- Not Provided
- With Locking Nose
- Without Locking Nose
Images

Clear

Mounting Method
- Screw-In
- Press Fit
- Bolt Mounting
- Others
- Flange
Clear

Overall Length
- Standard
- Short
Clear

Body Material
- Steel
- Stainless Steel
- Zinc Die Cast
- Polyamide
- Others
Clear

All Stainless
- Applicable
- Not Compliant
Clear

Tip Material
- Steel
- Stainless Steel
Clear

Body O.D./Thread M(mm)
3

5

6

8

10

M10

12

M12

14

14.5

16

M16

18

20

M20

22

24
Drawing

Clear

Stroke S(mm)
3.5

4

5

5-9

6

6-10

7

7.5

8

9

9.5

10

12

14

15

16

18

19

20

24

25
Drawing

Clear

Tip Surface Treatment
- Not Provided
- Black Oxide
- Trivalent Chromate
- Electroless Nickel Plating
- Nickel Plating
- Others
- Zinc Plating
Clear

Tip Heat Treatment
- Not Provided
- Hardened
- Carburized
Clear

Tip O.D. d(Ø)
2

2.5

3

4

5

6

7

7.1

8

M8 x 1

8.28

10

M10 x 1

11.52

12

M12 x 1,5

14

15.49

16

M16 x 1,5

18

19.7

20

M20 x 1,5

22

25

30

60

80
Drawing

Clear

Length L(mm)
25

26.5

29.5

30

30.5

31

31.5

32

33

34

34.5

35

36

37

37.5

38

38.5

39

40

40.5

41

41.5

41.7

42

42.5

43

43.5

44

44.5

45

46

46.5

47

47.5

48

49

50

51

51.7

52

53

54

54.5

54.7

56

56.5

57

57.25

57.5

58

58.5

59

59.5

60.4

60.5

61

62

63

63.5

64.5

65

66

67.5

68

68.5

69

70

70.5

71

72

72.5

73

74

75

75.5

76

77

79

80

80.5

82

83

84

85

86.5

91

92

98.5

99.9

102.5

123
Drawing

Clear

Brand

- MISUMI (19)
- Cost Efficient Products ()
Clear

CAD data type

- 2D
- 3D
Clear

Standard shipping days

All

Same day

2 Days or Less

3 Days or Less

4 Days or Less

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less
Clear