Locating Units（Page 3）

132

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 12 Days or Less 13 Days or Less

?* Information on days to ship and prices

Electrical positioning unit

ASUTEC

Positioning units are used to precisely position the workpiece carrier after stopping. When the positioning cylinder is extended, the workpiece carrier is centered with suitable locating pins and thus exactly positioned. Typically, the workpiece carrier is lifted by the positioning slightly from the conveyor belt and above pressed against a fixed stop. Thus, the workpiece carrier no longer rests on the conveyor belt and processes on the work piece can occur without vibration. The positioning units are supplied without accessories and have a receiving bore for the insertion of suitable locating pin. The electrical positioning units "ASPEL" from ASUTEC have an electromotive drive and an integrated evaluation electronics.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,270.94 €
Min. Shipping Days ：	15 Days

*Unit price with basic configuration

Pneumatic accelerator module

ASUTEC

Acceleration modules from ASUTEC ensure a noticeable reduction of the cycle times by shortening the time between the individual machining cycles. The acceleration module ensures that the workpiece to be machined leaves the machining station more quickly and thus the next machining cycle can start earlier. The use of an acceleration module is very effective especially in transfer systems with low belt friction, as in the case of an accumulation roller chain conveyor. As soon as the separator lowers and releases the workpiece carrier for further transport, the acceleration module is activated and pushes and accelerates the workpiece carrier. This makes it possible to shorten the cycle times of up to 2 seconds.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	290.66 €
Min. Shipping Days ：	19 Days

*Unit price with basic configuration

Pneumatic separator for roller conveyor system without damping

ASUTEC

The separator from ASUTEC for roller conveyor systems have the advantage that they can be usedfor direct integration into roller conveyors because of the specially developed slim design. These separators stop one or more accumulated workpiece carriers on the defined workpiece carrier stop plate in roller conveyor systems. Especially useful are the separator for tight installation spaces between the rollers. The concept developed by Asutec with extreme stability and high resistance to contamination makes these separators universally applicable. For all ASUTEC separators for roller conveyor systems, it is possible to query the upper and the lowered position with inductive proximity switches.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	424.70 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Locating adapters flange stainless steel, pneumatic (K1741)

KIPP

· Suitable for automation processes

· Pneumatic actuation

· Compact design

· Rust-free

Select to compare

Configure now
Starting from^∗ ：	104.08 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter turn latches, with slot head (K1730)

KIPP

· Small lock with high tensile strength

· Opened or closed with a quarter turn

· Vibration-resistant and tolerance-compensating

· Loss-proof (according to mechanical engineering directive)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.82 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter-turn latches stainless steel rotary knob, stainless steel (K1561)

KIPP

· Locking element for connecting two separate plates

· Click signal when locked

· Ideal where space is restricted:

· Mounting option for plate thickness 6 to 14 mm

· Fastening screws included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	59.73 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Repair kit (K0935)

KIPP

[Features]
・Locating cylinder carbon steel.
・Balls roller bearing steel.
・Locating cylinder tempered, black oxidised. Balls hardened, bright.

Select to compare

Configure now
Starting from^∗ ：	11.80 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Repair set for stainless steel locating cylinders (K1474)

KIPP

· Accessories for Ball Lock stainless steel locating cylinders

Select to compare

Configure now
Starting from^∗ ：	16.20 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating feet (02090)

NORELEM

· Simple assembly

· High stability

· Hardened and black oxidised

Select to compare

Configure now
Starting from^∗ ：	8.56 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter turn latches, with star grip (05592-50)

NORELEM

· Small lock with high tensile strength

· Opened or closed with a quarter turn

· Vibration-resistant and tolerance-compensating

· Loss-proof (according to mechanical engineering directive)

Select to compare

Configure now
Starting from^∗ ：	6.98 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter turn latches, with slot head (05592-50)

NORELEM

· Small lock with high tensile strength

· Opened or closed with a quarter turn

· Vibration-resistant and tolerance-compensating

· Loss-proof (according to mechanical engineering directive)

Select to compare

Configure now
Starting from^∗ ：	3.46 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter turn latches, with cross head (05592-50)

NORELEM

· Small lock with high tensile strength

· Opened or closed with a quarter turn

· Vibration-resistant and tolerance-compensating

· Loss-proof (according to mechanical engineering directive)

Select to compare

Configure now
Starting from^∗ ：	3.46 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter-turn clamp locks stainless steel, rotary knob stainless steel (05591)

NORELEM

· Locking element for connecting two separate plates

· Click signal when locked

· Form A mounting option: for plate thickness 6 or 12 mm

· Fastening screws included

Select to compare

Configure now
Starting from^∗ ：	50.33 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Quarter-turn clamp locks stainless steel, rotary knob plastic (05591)

NORELEM

· Locking element for connecting two separate plates

· Click signal when locked

· Form A mounting option: for plate thickness 6 or 12 mm

· Fastening screws included

Select to compare

Configure now
Starting from^∗ ：	40.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating adapters, flange, stainless steel, pneumatic (03161-16)

NORELEM

· Suitable for automation processes

· Pneumatic actuation

· Compact design

· Rust-free

Select to compare

Configure now
Starting from^∗ ：	128.64 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating adapters, cylindrical, stainless steel, pneumatic (03161-15)

NORELEM

· Suitable for automation processes

· Pneumatic actuation

· Compact design

· Rust-free

Select to compare

Configure now
Starting from^∗ ：	112.57 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Repair set for stainless steel locating cylinders (03153-02)

NORELEM

· Accessories for Ball Lock stainless steel locating cylinders

Select to compare

Configure now
Starting from^∗ ：	20.05 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating cylinder, stainless steel Ball Lock (03153-02)

NORELEM

· Reduced machine setup times

· Simple application

Select to compare

Configure now
Starting from^∗ ：	152.46 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating supports (K0816)

KIPP

· Sheath and contact faces ground

· Fastened with shoulder screw

· Repeatable positioning

· Tempered

· For supporting workpieces

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	38.09 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating pins removable Form C (K0817)

KIPP

· Hardened

· Ground

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	13.74 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating pins removable Form D (K0818)

KIPP

· Hardened

· Ground

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	15.40 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Supports (K0823)

KIPP

· Contact faces ground and tempered

· Various heights available

· Fastened with a socket head screw

· For supporting workpieces

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	22.01 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Seating blocks adjustable (K0824)

KIPP

· Contact faces ground and tempered

· Various heights available

· Fastened with a socket head screw

· For supporting workpieces

· Free positioning

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	95.62 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adjustable supports (K0825)

KIPP

· Supporting overhanging clamping points

· Prevents vibrations and bending

· Height-adjustable

· Various profile inserts K0826

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	48.40 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Positioning units, spring-loaded (K0917)

KIPP

· Positioning and supporting of workpieces with boreholes

· Form A: locating and support element

· Form B: locating element

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	125.90 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating cylinders pneumatic, Form A (K1219)

KIPP

· Fast opening and closing

· Pneumatic positioning and clamping system

· Reduced changeover times

· Quick and easy component assembly

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	140.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating cylinders pneumatic, Form B (K1219)

KIPP

· Fast opening and closing

· Pneumatic positioning and clamping system

· Reduced changeover times

· Quick and easy component assembly

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	140.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating bushes for pneumatic locating cylinder (K1220)

KIPP

· Fast, secure and precise positioning of the exchange unit

· Counterpart to the locating cylinder

· Shorter set-up and changeover times

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	56.01 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Baseplate for centric vice, Form A (K1274)

KIPP

Material:
Steel.
Version:
Hardened and ground.
Note:
The base plate enables the centric vices (65 - 80 - 125) to be mounted on M12/12F7 grid systems with a grid spacing of 50 mm.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	364.55 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating cylinders pneumatic, Form A (K1486)

KIPP

· Fast opening and closing

· Pneumatic positioning and clamping system

· Reduced changeover times

· Quick and easy component assembly

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	563.50 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angle plates, grey cast iron, wide with pre-machined clamping faces (K1531)

KIPP

· Base element for system construction

· Precision-machined support and clamping faces

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	879.75 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angle plates, grey cast iron, wide with grid holes (K1531)

KIPP

· Base element for system construction

· Hardened locating and tapped bushes

· Grid spacing 50 mm

· Precision-machined support and clamping faces

· Compatible with basic elements with grid holes

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,163.80 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Baseplates, grey cast iron, round, with grid holes (K1532)

KIPP

· Base element for system construction

· Grid spacing 50 mm

· Hardened locating and tapped bushes

· Ground support and clamping faces

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	906.20 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Baseplates, grey cast iron, round, with T-slots (K1532)

KIPP

· Base element for system construction

· T-slots ground

· Ground support and clamping faces

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,053.40 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Positioning bush Steel for centring units (K1628)

KIPP

· Extremely high repeat accuracy of <0.003 mm

· No tilting when joining

· Not sensitive to dirt and splinters

· Easy handling

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	34.21 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angle plates without T-slots, grey cast iron (K1451)

KIPP

Material:
GJL 250 annealed.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	151.64 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

UNILOCK 5-axis baseplate for general clamping, size 138 mm (K1420)

KIPP

· Basic element for large and heavy workpieces

· Can be flexibly adjusted to the workpiece

· Contact faces case-hardened and ground

· Flexible positioning

· Combinable with K1419 basic module

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	684.25 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

UNILOCK 5-axis basic module system size 138 mm (K1419)

KIPP

· Zero point clamping system

· For clamping large and heavy workpieces

· Manual actuation

· Extremely high repeat accuracy

· 5-side machining without interfering edges

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,727.30 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Baseplate for centric vice, Form C (K1274)

KIPP

Material:
Steel.

Version:
Hardened and ground.

Note:
The baseplate enables the centric vices (125) to be mounted on machine tables with T-slots.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	665.85 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Baseplate for centric vice, Form B (K1274)

KIPP

Material:
Steel.

Version:
Hardened and ground.

Note:
The baseplate enables the centric vices (65-80) to be mounted on machine tables with T-slots.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	646.30 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating cylinders pneumatic, Form A (03161-02)

NORELEM

· Fast opening and closing

· Pneumatic positioning and clamping system

· Reduced changeover times

· Quick and easy component assembly

Select to compare

Configure now
Starting from^∗ ：	676.20 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating cylinders pneumatic, Form A (03161)

NORELEM

· Fast opening and closing

· Pneumatic positioning and clamping system

· Reduced changeover times

· Quick and easy component assembly

Select to compare

Configure now
Starting from^∗ ：	173.08 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Type

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	ASUTEC	ASUTEC	ASUTEC	KIPP	KIPP	KIPP	KIPP	KIPP	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	KIPP	NORELEM	NORELEM
Product Series	Electrical positioning unit	Pneumatic accelerator module	Pneumatic separator for roller conveyor system without damping	Locating adapters flange stainless steel, pneumatic (K1741)	Quarter turn latches, with slot head (K1730)	Quarter-turn latches stainless steel rotary knob, stainless steel (K1561)	Repair kit (K0935)	Repair set for stainless steel locating cylinders (K1474)	Locating feet (02090)	Quarter turn latches, with star grip (05592-50)	Quarter turn latches, with slot head (05592-50)	Quarter turn latches, with cross head (05592-50)	Quarter-turn clamp locks stainless steel, rotary knob stainless steel (05591)	Quarter-turn clamp locks stainless steel, rotary knob plastic (05591)	Locating adapters, flange, stainless steel, pneumatic (03161-16)	Locating adapters, cylindrical, stainless steel, pneumatic (03161-15)	Repair set for stainless steel locating cylinders (03153-02)	Locating cylinder, stainless steel Ball Lock (03153-02)	Locating supports (K0816)	Locating pins removable Form C (K0817)	Locating pins removable Form D (K0818)	Supports (K0823)	Seating blocks adjustable (K0824)	Adjustable supports (K0825)	Positioning units, spring-loaded (K0917)	Locating cylinders pneumatic, Form A (K1219)	Locating cylinders pneumatic, Form B (K1219)	Locating bushes for pneumatic locating cylinder (K1220)	Baseplate for centric vice, Form A (K1274)	Locating cylinders pneumatic, Form A (K1486)	Angle plates, grey cast iron, wide with pre-machined clamping faces (K1531)	Angle plates, grey cast iron, wide with grid holes (K1531)	Baseplates, grey cast iron, round, with grid holes (K1532)	Baseplates, grey cast iron, round, with T-slots (K1532)	Positioning bush Steel for centring units (K1628)	Angle plates without T-slots, grey cast iron (K1451)	UNILOCK 5-axis baseplate for general clamping, size 138 mm (K1420)	UNILOCK 5-axis basic module system size 138 mm (K1419)	Baseplate for centric vice, Form C (K1274)	Baseplate for centric vice, Form B (K1274)	Locating cylinders pneumatic, Form A (03161-02)	Locating cylinders pneumatic, Form A (03161)
CAD	3D	3D	3D		2D / 3D	2D / 3D													2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	1,270.94 € *Unit price with basic configuration Volume Discount	290.66 € *Unit price with basic configuration Volume Discount	424.70 € *Unit price with basic configuration	104.08 € *Unit price with basic configuration	2.82 € *Unit price with basic configuration	59.73 € *Unit price with basic configuration	11.80 € *Unit price with basic configuration	16.20 € *Unit price with basic configuration	8.56 € *Unit price with basic configuration	6.98 € *Unit price with basic configuration	3.46 € *Unit price with basic configuration	3.46 € *Unit price with basic configuration	50.33 € *Unit price with basic configuration	40.02 € *Unit price with basic configuration	128.64 € *Unit price with basic configuration	112.57 € *Unit price with basic configuration	20.05 € *Unit price with basic configuration	152.46 € *Unit price with basic configuration	38.09 € *Unit price with basic configuration	13.74 € *Unit price with basic configuration	15.40 € *Unit price with basic configuration	22.01 € *Unit price with basic configuration	95.62 € *Unit price with basic configuration	48.40 € *Unit price with basic configuration	125.90 € *Unit price with basic configuration	140.02 € *Unit price with basic configuration	140.02 € *Unit price with basic configuration	56.01 € *Unit price with basic configuration	364.55 € *Unit price with basic configuration	563.50 € *Unit price with basic configuration	879.75 € *Unit price with basic configuration	1,163.80 € *Unit price with basic configuration	906.20 € *Unit price with basic configuration	1,053.40 € *Unit price with basic configuration	34.21 € *Unit price with basic configuration	151.64 € *Unit price with basic configuration	684.25 € *Unit price with basic configuration	1,727.30 € *Unit price with basic configuration	665.85 € *Unit price with basic configuration	646.30 € *Unit price with basic configuration	676.20 € *Unit price with basic configuration	173.08 € *Unit price with basic configuration
Min. Shipping Days	15 Days	19 Days	10 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days
Type	-	-	-	-	-	-	-	-	Support Unit	Support Unit	Support Unit	Support Unit	Clamp Unit	Clamp Unit	Support Unit	Support Unit	Support Unit	Support Unit	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Support Unit	Support Unit