Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
Locating Units
Positioning unit parts are parts used to correct or align mold die positions. They include parts enabling easy positioning of workpieces in the form of thin plates such as by preventing backflow of pallets on a transport line, positioning buckets in transport equipment, preventing falls of transported items or preventing backflow of transport units. They also include parts used to secure the covers of jigs or items with mechanisms for single-action mounting of bar-shaped parts, and parts used to lock openings. Other parts in this category include fasteners that are used instead of bolts and enable tool-free single-action attachment mounting/removal or jig replacement during equipment setup changes. Since they can be easily fastened, they can be fastened to a uniform tightness and eliminate variations in fastening strength. Some parts enable single-action switching between clamping and unclamping, and show at a glance whether they are fastened from the orientation of the knob.
136 položek
* Informace o dnech dodání, přepravních nákladech a cenách
KonfigurovatCena (bez DPH) od:18.60 €Běžné datum odeslání:Skladová položka: 1 pracovní denK dispozici odeslání ve stejný den
- Volume Discount
ASUTEC
Pneumatic separator with damping
Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).Více informací- CAD:
- 3D
Type - KonfigurovatCena (bez DPH) od:255.57 €Běžné datum odeslání:10 pracovních dnů
- SLEVA
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
MISUMI
Type Support Unit KonfigurovatCena (bez DPH) od:Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- Volume Discount
ASUTEC
Pneumatic separator without damping
Separators without damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is low or when the transported workpieces are insensitive to shocks. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).Více informací- CAD:
- 3D
Type - KonfigurovatCena (bez DPH) od:91.45 €Běžné datum odeslání:7 pracovních dnů
- Volume Discount
ASUTEC
Angle dampers dampen workpiece carriers to a stop and are mainly used where workpiece carriers are changing direction at a cross-intersection. For example, when the workpiece carrier is changing its transport direction from a transverse section into a longitudinal section and vice versa. Angle dampers are commonly used in transfer systems were shock-sensitive products are transported.Více informací- CAD:
- 3D
Type - KonfigurovatCena (bez DPH) od:259.33 €Běžné datum odeslání:10 pracovních dnů
KIPP
Clamping plates recessed for quarter-turn clamp locks (K1062)
[Specifications]・Main material: stainless steel, steel・Surface finish body: bright, nickel-plated・D=diameter(mm): 5, 8[Features]・Form B mounting option for plate thickness over 10mm・Fastening screws includedVíce informacíType - KonfigurovatCena (bez DPH) od:14.80 €Běžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- Volume Discount
IMAO CORPORATION
Lever operation pushes the internal push bar, and shaft is clamped. Unclamp operates when returning lever with plate spring acting on push bar.Více informacíType Clamp Unit KonfigurovatCena (bez DPH) od:42.18 €Běžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
KIPP
Push button latches stainless steel, Form A, with head (K1562)
[Specifications]・Main material: stainless steel・Surface finish body: bright・Component material: stainless steel[Features]・For connecting machine parts and workpieces quickly and easily・Mounting option for plate thickness 3 to 27mm・Secure locking by simply pressing and releasing the push button・Ideal for places where space is limited・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use・Version 1: with headVíce informacíType - KonfigurovatCena (bez DPH) od:40.43 €Běžné datum odeslání:4 pracovních dnů
KIPP
Quarter-turn clamp locks stainless steel, knob plastic (K1061)
[Specifications]・Main material: steel・Surface finish body: nickel-plated・Component material: plastic[Features]・Locking element for connecting two separate plates・Click signal when locked・Form A mounting option: for plate thickness 6 or 12 mm・Fastening screws included・Main material: steelVíce informacíType - KonfigurovatCena (bez DPH) od:32.38 €Běžné datum odeslání:4 pracovních dnů
- Volume Discount
IMAO CORPORATION
Thumb Turn Clamper (QCTH, QCTHL)
Cam & spring type with lock / unlock state visible at a glance, high visibility with safety mechanism. Knob made of metal is used to reduce chance of damage.Více informacíType Single-Action Mounted Jig KonfigurovatCena (bez DPH) od:59.87 €Běžné datum odeslání:6 pracovních dnů
KIPP
Quarter turn latches, with knurled head (K1730)
· Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)Více informacíType - KonfigurovatCena (bez DPH) od:5.65 €Běžné datum odeslání:4 pracovních dnů
KIPP
Lock bottom parts for quarter turn latches (K1732)
· Quick assembly· Vibration-resistant and tolerance-compensating· Suitable for all locking pinsVíce informacíType - KonfigurovatCena (bez DPH) od:1.39 €Běžné datum odeslání:Skladová položka: 1 pracovní denK dispozici odeslání ve stejný den
KIPP
Quarter-turn latches steel rotary knob, plastic (K1561)
· Locking element for connecting two separate plates· Click signal when locked· Ideal where space is restricted:· Mounting option for plate thickness 6 to 14 mm· Fastening screws includedVíce informacíType - KonfigurovatCena (bez DPH) od:37.67 €Běžné datum odeslání:4 pracovních dnů
KIPP
Push button latches stainless steel, Form B, without head (K1562)
[Specifications]・Main material: stainless steel・Surface finish body: bright・Component material: stainless steel[Features]・For connecting machine parts and workpieces quickly and easily・Mounting option for plate thickness 3 to 27mm・Secure locking by simply pressing and releasing the push button・Ideal for places where space is limited・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use・Version 1: without headVíce informacíType - KonfigurovatCena (bez DPH) od:38.59 €Běžné datum odeslání:4 pracovních dnů
NORELEM
· Modular system for drilling jigs· Locking system for drilling platesVíce informacíType Support Unit KonfigurovatCena (bez DPH) od:66.79 €Běžné datum odeslání:4 pracovních dnů
- Volume Discount
ASUTEC
Pneumatic separator for roller conveyor system with damping
The separator from ASUTEC for roller conveyor systems have the advantage that they can be usedfor direct integration into roller conveyors because of the specially developed slim design. These separators stop one or more accumulated workpiece carriers on the defined workpiece carrier stop plate in roller conveyor systems. Especially useful are the separator for tight installation spaces between the rollers. The concept developed by Asutec with extreme stability and high resistance to contamination makes these separators universally applicable. For all ASUTEC separators for roller conveyor systems, it is possible to query the upper and the lowered position with inductive proximity switches.Více informací- CAD:
- 3D
Type - KonfigurovatCena (bez DPH) od:766.70 €Běžné datum odeslání:10 pracovních dnů
- Volume Discount
IMAO CORPORATION
Quick Shaft Clamp (Air Operation) (QSCA)
Clamp with spring pressure, and unclamping with air pressure, so no worry of lowered clamping force due to air leaks etc. Multiple simultaneous controls possible.Více informacíType Clamp Unit KonfigurovatCena (bez DPH) od:119.57 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
ASUTEC
Electrical separator with damping
Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. The electrically controlled separators from ASUTEC are available in many different versions. On the one hand, with a motorized drive and integrated evaluation electronics or, on the other hand, with an electrically controlled single-stroke control magnet. The damping is effected by a hydraulic damping unit or by an adjustable air damping system.Benefits of the electrical separators:Elimination of pneumaticEco-Friendly production by abolition of the extract airMinimal energy consumptionIncreased energy efficiencyEasy and very quick installationHigh time and cost savingsVíce informací- CAD:
- 3D
Type - KonfigurovatCena (bez DPH) od:1,166.29 €Běžné datum odeslání:15 pracovních dnů
KIPP
Locating cylinder Ball Lock (K0935)
· Mechanical positioning and clamping system· Various sizes· High retaining forces· For different thicknesses of clamping plateVíce informacíType - KonfigurovatCena (bez DPH) od:101.52 €Běžné datum odeslání:4 pracovních dnů
NORELEM
Quarter-turn clamp locks stainless steel, rotary knob plastic (05591)
· Locking element for connecting two separate plates· Click signal when locked· Form A mounting option: for plate thickness 6 or 12 mm· Fastening screws includedVíce informacíType Clamp Unit KonfigurovatCena (bez DPH) od:40.02 €Běžné datum odeslání:4 pracovních dnů
KonfigurovatCena (bez DPH) od:16.19 €Běžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
KIPP
Quarter-turn clamp locks stainless steel, knob stainless steel (K1061)
[Specifications]・Main material: stainless steel・Component material: stainless steel・D=diameter(mm): 5, 8[Features]・Locking element for connecting two separate plates・Click signal when locked・Form A mounting option: for plate thickness 6 or 12 mm・Fastening screws includedVíce informacíType - KonfigurovatCena (bez DPH) od:40.71 €Běžné datum odeslání:4 pracovních dnů
MISUMI
[Features] It can be used in places that cannot be directly detected by proximity sensors.Více informacíType Workpiece Detection Unit KonfigurovatBěžné datum odeslání:7 pracovních dnů
- Volume Discount
ASUTEC
Return stops are used in low-friction transfer systems (eg with accumulation roller chain). They prevent rebounding of the workpiece carrier from the separator in the stopping process. Rebounding the workpiece carriers leads to complications in the control of the workpiece carriers since the workpiece carrier is temporarily not at the presumed position. In addition, rebounding has a negative effect on the cycle time, and the components of the transfer system are more strongly loaded by the multiple impact of the workpiece carrier on the separator. Retrun stops may not be used to stop the workpiece carriers in the conveying direction. During transport ot the workpiece carrier in regular transport direction, the pawl of the return stop is pressed down by the workpiece carrier when moving over it.Retrun stops are also available, which can be lowered pneumatically or electrically for the reversing operation of the conveyor.Více informací- CAD:
- 3D
Type - KonfigurovatCena (bez DPH) od:59.52 €Běžné datum odeslání:5 pracovních dnů
KIPP
Clamping plates steel for quarter-turn clamp locks (K1560)
· Fastening screws included· Mounting option for plate thickness starting from 9 mm· Accessory for quarter-turn clamp lock K1559Více informacíType - KonfigurovatCena (bez DPH) od:15.62 €Běžné datum odeslání:4 pracovních dnů
KIPP
Clamping plates surface mounted for quarter-turn clamp locks (K1062)
· Form A mounting option: for plate thickness 6 to 10 mm· Metric fine thread· Fastening screws includedVíce informacíType - KonfigurovatCena (bez DPH) od:14.80 €Běžné datum odeslání:4 pracovních dnů
KIPP
Quarter-turn clamp lock steel, rotary knob plastic (K1558)
· Locking element for connecting two separate plates· With retractable shank, ideal for places where space is limited· Click signal when locked· Mounting option for plate thickness 6 to 14 mm· Fastening screws includedVíce informacíType - KonfigurovatCena (bez DPH) od:34.91 €Běžné datum odeslání:4 pracovních dnů
KIPP
Positioning cones, Steel, for centring units (K1627)
· Extremely high repeat accuracy of <0.003 mm· No tilting when joining· Not sensitive to dirt and splinters· Easy handlingVíce informacíType - KonfigurovatCena (bez DPH) od:47.08 €Běžné datum odeslání:4 pracovních dnů
KIPP
Quarter-turn clamp locks stainless steel, knob stainless steel (K1559)
· High clamping forces up to 400 N· Ideal where space is restricted:· Click signal when locked· Fastening screws included· Mounting option for plate thickness 6 to 20 mmVíce informacíType - KonfigurovatCena (bez DPH) od:71.68 €Běžné datum odeslání:4 pracovních dnů
IMAO CORPORATION
Using lever operation linear rail is directly clamped. As clamp is with internal screw, clamping is always regular. Can operate even in narrow gap.[Features]· Easy operation and secure locking.· As clamps with internal spring, clamping is always regular.· As swivel space for clamping lever is not required, can operate even in small gap as shown in the diagram below.· Lever direction can be changed by 90° pitchVíce informacíType - KonfigurovatCena (bez DPH) od:181.03 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
GANTER
Installation kits for position indicators
The installation kits GN 491.1 are required for the attachment of a position indicator to double tube linear actuators. They consist of an adapter shaft and, depending on the position indicator, a torque support including fixing screws.Mechanical position indicators GN 953 / GN 954 / GN 955 must be ordered so that the counter is aligned with the rising of the trapezoidal thread spindle.For the position indicators GN 9053 / GN 9054 the respective rising is set at the position indicator for every programming.Více informacíType - KonfigurovatCena (bez DPH) od:18.30 €Běžné datum odeslání:7 pracovních dnů
- Volume Discount
ASUTEC
Positioning units are used to precisely position the workpiece carrier after stopping. When the positioning cylinder is extended, the workpiece carrier is centered with suitable locating pins and thus exactly positioned. Typically, the workpiece carrier is lifted by the positioning slightly from the conveyor belt and above pressed against a fixed stop. Thus, the workpiece carrier no longer rests on the conveyor belt and processes on the work piece can occur without vibration. The positioning units are supplied without accessories and have a receiving bore for the insertion of suitable locating pin. In many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).Více informací- CAD:
- 3D
Type - KonfigurovatCena (bez DPH) od:207.97 €Běžné datum odeslání:10 pracovních dnů
KIPP
Cable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)
[Specifications]・Main material: plastic, stainless steel・Component material: silicon・Component colour: blueCable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)Více informacíType - KonfigurovatCena (bez DPH) od:9.53 €Běžné datum odeslání:4 pracovních dnů
KIPP
Quarter-turn clamp locks, flat stainless steel (K1061)
[Specifications]・Main material: steel・Surface finish body: nickel-plated・Component material: stainless steel[Features]・Locking element for connecting two separate plates・Ideal for restricted spaces・Click signal when locked・Form A mounting option: for plate thickness 6 or 12mm・Fastening screws includedVíce informacíType - KonfigurovatCena (bez DPH) od:42.56 €Běžné datum odeslání:4 pracovních dnů
NORELEM
Lock bottom parts for quarter turn latches (05592-52)
· Quick assembly· Vibration-resistant and tolerance-compensating· Suitable for all locking pinsVíce informacíType Support Unit KonfigurovatCena (bez DPH) od:1.73 €Běžné datum odeslání:4 pracovních dnů
NORELEM
Quarter turn latches, with knurled head (05592-50)
· Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)Více informacíType Support Unit KonfigurovatCena (bez DPH) od:6.98 €Běžné datum odeslání:4 pracovních dnů
KonfigurovatCena (bez DPH) od:15.40 €Běžné datum odeslání:4 pracovních dnů
- Volume Discount
GANTER
With indexing levers GN 215 shafts can be turned through a predetermined angle and positively locked. To index, lift the lever against spring pressure from serrations (one hand control).Limiting the indexing angle can be achieved with two dowels (sketch).The bushing is connected to the shaft via keyway.The location flange is bolted to the machine with two socket head cap screws (M 5).The lever, via the location pin, provides the connection between shaft and location flange.The serrations are protected from swarf and similar particles by the cover. This cover can be inserted by hand (elastic segments engage into a groove) and removed with a screw driver.Více informacíType - KonfigurovatCena (bez DPH) od:107.26 €Běžné datum odeslání:7 pracovních dnů
- Volume Discount
ASUTEC
Return stops are used in low-friction transfer systems (eg with accumulation roller chain). They prevent rebounding of the workpiece carrier from the separator in the stopping process. Rebounding the workpiece carriers leads to complications in the control of the workpiece carriers since the workpiece carrier is temporarily not at the presumed position. In addition, rebounding has a negative effect on the cycle time, and the components of the transfer system are more strongly loaded by the multiple impact of the workpiece carrier on the separator. Retrun stops may not be used to stop the workpiece carriers in the conveying direction. During transport ot the workpiece carrier in regular transport direction, the pawl of the return stop is pressed down by the workpiece carrier when moving over it.Retrun stops "ASREL" can be lowered electrically for the reversing operation of the conveyor.Více informací- CAD:
- 3D
Type - KonfigurovatCena (bez DPH) od:455.36 €Běžné datum odeslání:15 pracovních dnů
KIPP
Locating cylinder with quick clamping system (K0935)
[Specifications]・Main material: high carbon steel・Component material: ball-bearing steel・D=pin diameter(mm): 13, 16,10[Features]・Fast opening and closing・Mechanical positioning and clamping system・Various sizes・High retaining forces・For different thicknesses of clamping plateVíce informacíType - KonfigurovatCena (bez DPH) od:107.53 €Běžné datum odeslání:4 pracovních dnů
KIPP
Quarter turn latches, with cross head (K1730)
· Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)Více informacíType - KonfigurovatCena (bez DPH) od:2.82 €Běžné datum odeslání:4 pracovních dnů
KIPP
Quarter turn latches, with star grip (K1730)
· Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)Více informacíType - KonfigurovatCena (bez DPH) od:5.65 €Běžné datum odeslání:4 pracovních dnů
NORELEM
Clamping plates surface mounted for quarter-turn clamp locks (05592)
· Form A mounting option: for plate thickness 6 to 10 mm· Metric fine thread· Fastening screws includedVíce informacíType Clamp Unit KonfigurovatCena (bez DPH) od:18.30 €Běžné datum odeslání:4 pracovních dnů
NORELEM
Quarter-turn clamp locks stainless steel, rotary knob stainless steel (05591)
· Locking element for connecting two separate plates · Click signal when locked· Form A mounting option: for plate thickness 6 or 12 mm· Fastening screws includedVíce informacíType Clamp Unit KonfigurovatCena (bez DPH) od:50.33 €Běžné datum odeslání:4 pracovních dnů
KonfigurovatCena (bez DPH) od:13.40 €Běžné datum odeslání:4 pracovních dnů
