Push-Down Workpiece Clamps（Material：Steel）

?* Information on days to ship and prices

• 

  Spring Clamp Large

  MISUMI

  [The spring force clamps the workpiece from above.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.25 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spring Clamps Small

  MISUMI

  [Features] The spring force clamps the workpiece from above.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.13 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Snap Clamp (Down Mini Type) (QLSNDM)

  IMAO CORPORATION

  Down press type compact spring clamp force of 10N to 30N for light-duty work.
  
  [Features]
  · Down press type.
  · Compact and small sized hook, ideal for use in small spaces.
  · Finger tip operation fitting lever shape
  · In unclamped position lever is fixed.
  · Employs snap system. (Rotating arm single lock type)

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	68.64 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Screw Jacks / screw jack

  HALDER

  Trapezoidal self-locking thread, spindle with final safety device. The holders, which can be secured by means of the T-slots, make it possible to tighten the jacks so that they will not slip out of position when a workpiece is changed. They also allow to fit screw jacks to vertical clamping surfaces. Screw jacks are frequently used for supporting workpieces. Use of the self-aligning cap ensures a correctly aligned bearing surface. Using the centering plate as an intermediate element, it is possible to fit a number of screw jacks sizes 52, 70 and 100 together one above the other.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.86 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping Element Systems

  HALDER

  [Specifications]
  ・Type: Hold Down Type
  ・Arm Height Type: Standard
  ・Material: Steel
  ・Wearing parts: Heat-treated steel
  
  Clamping Element Systems.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	277.57 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamps, with soft face

  HALDER

  The brass plate protects the workpiece from damage. The combination of nut DIN 6330 B (EH 23070.)/conical seat DIN 6319 G (EH 23050.) on the clamping bolt and thrust pad DIN 6311 (EH 22560. removable) on the adjusting screw compensates for the lack of parallelity. The clamp can be used either way (soft or hard clamping surface).

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.21 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Bedding Supports

  HALDER

  The bedding support is used to support additional clamping points on components.
  The benefits of the bedding support are:
  - provides additional support without distortion
  - helps to eliminate tool vibration
  - compact, low construction
  - supports ribs, beads and shackles to reinforce clamped components
  - distortion-free support of raw parts
  - easy handling - clamping outside of workpiece is also possible by means of adjustable clamping levers.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	228.52 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Down-Thrust Clamps, size 82,5

  HALDER

  The down-thrust clamp is a universal mechanical clamp that allows fast and easy exchange and clamping of workpieces - as the clamping head can be easily manually swivelled to clear the workpiece.
  The down-thrust clamps provide the following advantages:

  - compact footprint
  - clamping force of up to max. 30 kN via a clamping screw WS 36
  - clamping head swivels 360°
  - clamping stroke 30 mm
  - clamping height max. 250 mm
  - integrated clamping height stop for safe use
  - fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing of 100 x 100 mm
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,674.21 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Absorbing Pusher Pins

  MISUMI

  [Features] It is attached to the tip of the cylinder and gently clamps the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamps, DIN 6314 flat

  HALDER

  Heat-treated steel, varnished.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.84 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamps, DIN 6316 with goose-neck

  HALDER

  Heat-treated steel, varnished.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.63 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Supporting Elements

  HALDER

  The support element is used to support additional clamping points on components.
  The benefits of the support element are:
  - provides additional support without distortion
  - helps to eliminate tool vibration
  - supports ribs, beads and shackles to reinforce clamped components
  - distortion-free support of raw parts
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	839.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Loose Slot Tenons, DIN 6323

  HALDER

  To be used for locating fixtures and clamping elements onto machine tables with T-slots to DIN 650.
  Being simply pushed into position after fixture or clamping element has been roughly positioned, they cannot cause damage to the machine as could protruding fixed slot tenons or low slot tenons.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.12 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Swing Clamp (QLSW)

  IMAO CORPORATION

  Toolless clamp that clamps with rotating hook by lever operation. With lever, without lever, without hook / lever available. Both right and left rotational specifications available. This series CAD data is being revised. These revisions will be completed soon.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	219.48 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Swing Clamp (Cam Lever Type) (QLSWC)

  IMAO CORPORATION

  Toolless clamp with rotating hook by lever operation. Cam lever type. Black electroless nickel plating specification available. Both right and left rotational specifications available. This series CAD data is being revised. These revisions will be completed soon.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	119.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Clamps, DIN 6315 B forked

  HALDER

  Heat-treated steel, varnished.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.83 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamps, with flat-faced ball

  HALDER

  Ball protected against rotating.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.68 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Floating Clamps, combined clamping and locking M 12

  HALDER

  The floating clamp is used to clamp and support additional clamping points on components.
  The benefits of the floating clamp are:
  - avoids vibration during the processing
  - clamps ribs, beads and shackles to reinforce clamped components
  - distortion-free clamping of raw parts.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	924.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Elements

  HALDER

  Used as clamps in conventional fixtures. A reamed hole is provided in the body of the fixture. The hole depth has to be adapted to the desired clamping height. To provide a counter force, a support can be placed against the rounded end of the clamp (radius 22). This support can be flat, half-rounded or V-shaped. Clamping is achieved by means of a DIN 933 hexagon screw.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	216.59 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Intermediate Elements, with support

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 50, 60
  ・b1(mm): 25, 30
  
  Intermediate Elements, with support

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	186.05 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamps, stepped

  HALDER

  Heat-treated steel, tempered, blackened.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.85 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamps, with nose, closed

  HALDER

  Thanks to the closed slot, the clamp is suitable for an application with rotating workpieces.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	102.83 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamps, with nose

  HALDER

  Heat-treated steel, tempered, blackened.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.21 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamps, slotted, with adjustable counter piece

  HALDER

  The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	89.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamps, slotted, with adjustable counter piece, with T-Bolt

  HALDER

  The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	104.11 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamps, slotted, with adjustable counter piece, with stud

  HALDER

  The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	101.90 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamps, slotted, with adjustable counter piece, with stud with internal hexagon

  HALDER

  The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	111.53 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Support Extensions, for straight clamps, slotted, with adjustable counter piece

  HALDER

  The support extension is screwed on the counter piece of the clamp EH 23185. for an extension of the clamping height (dimension h2). The clamping height can be adjusted stepless by means of the support extension.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.81 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Floating Clamps, separate clamping and locking M 12

  HALDER

  Floating clamps with seperate clamp and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping and supporting force can individually be designed.
  The benefits of the floating clamp are:
  - avoids vibration during the processing
  - clamps ribs, beads and shackles to reinforce clamped components
  - distortion-free clamping of raw parts.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,018.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Floating Clamps, combined clamping and locking M 16

  HALDER

  The floating clamp is used to clamp and support additional clamping points on components.
  The benefits of the floating clamp are:
  - especially suitable for large workpieces
  - avoids vibration during the processing
  - clamps ribs, beads and shackles to reinforce clamped components
  - distortion-free clamping of raw parts
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,649.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Jaws, for floating clamp M 12

  HALDER

  The clamping jaws can be used for floating clamps 23320.0012 and 23320.0014 to increase the clamping range.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	70.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamping Jaws, for floating clamp M 16

  HALDER

  The clamping jaws can be used for the floating clamp 23320.0016 to increase or decrease the clamping range.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	116.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Compact Clamps

  HALDER

  The compact clamps are all purpose clamping elements. Due to the self-locking clamping lever application can either take place in horizontal or vertical position in both, machined and raw workpieces.
  Features:
  - exact and position precise clamping
  - ease of operation
  - high clamping force at low tightening torques, abrasion-resistant due to clamping lever with bearings
  - continuous, large clamping area
  - clamping lever entirely retractable for hindrance-free exchange of workpieces
  - threaded clamping lever can be used with many clamping elements, e.g. ball-ended thrust screws (EH 22700. - EH 22720.), self-aligning pads (EH 22730./EH 22740.) etc.
  - large adjusting range at constant clamping force
  - continuous height adjustment by height adaptors 23690.0112/.0116
  - easy and flexible set up
  - corrosion-resistant
  - resistent to dirt and chips
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	297.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Height Adaptors, for compact clamp

  HALDER

  The height adaptors for compact clamps allow for a clamping height increase and have the following characteristics:
  - continuous covering of clamping height
  - height adaptor allows an exact positioning of compact clamp at designated slot distances
  - height can optionally be expanded
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	120.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Straight Clamps, short

  HALDER

  [Specifications]
  ・Type: Hold Down Type
  ・Material: Heat Treatment Steel
  ・a(mm): 20, 30
  
  Straight Clamps, short.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.52 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Straight Clamps, long

  HALDER

  [Specifications]
  ・Type: Hold Down Type
  ・Material: Heat Treatment Steel
  ・a(mm): 20, 30
  ・b1(mm): 12.5, 17
  
  Straight Clamps, long

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Intermediate Elements

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 25~240
  ・b1(mm): 25, 30
  
  Intermediate Elements.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	121.56 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Elements

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 30, 40
  ・b1(mm): 25, 30
  
  Base Elements.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	132.36 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Elements, swivelling

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 29.7, 39.7
  ・b(mm): 88, 105
  
  Base Elements, swivelling.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	348.34 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Elements, low

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 12
  ・b(mm): 30
  
  Base Elements, low.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	125.27 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Elements, for location hole

  HALDER

  [Specifications]
  ・Type: Peripherals
  ・Material: Steel
  ・a(mm): 8, 12
  ・b(mm): 25, 30
  
  Base Elements, for location hole.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	89.09 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Plates

  HALDER

  [Specifications]
  ・Material: Grey cast iron, Steel, case-hardened
  ・a(mm): 150, 200, 300
  ・b(mm): 100~800
  ・For screw: M12, M16
  
  Base Plates.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,614.33 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Plates, overall dimensions same as pallets DIN 55 201

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened
  ・a(mm): 100
  ・For screw: M12, M16
  ・System: V40, V70
  
  Base Plates, overall dimensions same as pallets DIN 55 201.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3,943.53 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Connecting Elements, hydraulically operated, double acting, with lifting-off and blow-out

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened
  ・Release pressure to(bar): 80
  ・Release pressure of(bar): 60
  ・Holding force(N): 30000
  
  Connecting Elements, hydraulically operated, double acting, with lifting-off and blow-out.

  Select to compare

  Configure now
  Starting from∗ ：	853.10 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Connecting Elements, hydraulically operated, single acting with lifting-off

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened
  ・Release pressure to(bar): 80
  ・Release pressure of(bar): 60
  ・Holding force(N): 20000
  
  Connecting Elements, hydraulically operated, single acting with lifting-off.

  Select to compare

  Configure now
  Starting from∗ ：	1,189.76 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...