Bearing Lock Nuts / Shaft Nuts / Locknuts（Page 2）
Filter products by: Type
?* Information on days to ship and prices
-
Configure now
Starting from∗ ： 374.65 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
SKF Hydraulic Nuts HMV E
SKF
[Specifications]
・Width B(mm): 38-66
[Features]
・Quick connection coupling can be fitted on the face or side of the nut
・A spare set of piston seals and maintenance kit is included
・Supplied with a quick connection coupling to fit the SKF hydraulic pumps
・Equipped with eyebolts, two tommy bars and four mating holes on their front face
[Applications]
・Facilitates easy and quick application of the high drive-up forces required for mounting bearings on tapered seatings
・The hydraulic nut can also be used for dismounting bearings mounted on either adapter or withdrawal sleevesConfigure nowStarting from∗ ： 1,578.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 61.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 54.78 € Min. Shipping Days ： 17 Days *Unit price with basic configuration
-
Slotted Round Nuts DIN 1804, Type h
MAEDLER
Material: type h = steel, hardened with the exeption of the thread, faces ground.
At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.
From size M45x1.5, the nuts have 6 slots.- Volume Discount
Configure nowStarting from∗ ： 5.13 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMMR, Single-Splitted, with Clamp Screw
MAEDLER
Material KMMR: Stainless steel 1.4301 (AISI 304).
Screw stainless steel A2-70.
Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Configure nowStarting from∗ ： 12.64 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMK with Integral Locking Device
MAEDLER
Material: KMK: Steel.
Strength min. 350 N/mm2.
Reusable shaft nut with integrated locking device.
Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning.- Volume Discount
Configure nowStarting from∗ ： 21.53 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
TWIN FU-NUT
FUJI SEIMITSU
Simultaneous machining of the thread and the bearing surface, as well as a combination of high surface deflection accuracy and lock functions, ensures that accurate bearing rotation is maintained constantly.- Volume Discount
Configure nowStarting from∗ ： 25.40 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Fine U Nut
SUNCO
The friction ring is crimped and integrated with the nut, same as on the U Nut.
[Features]
· Lock nut for bearing.
· The spring action of the friction ring creates friction on the male screw to cause a locking effect.
· Can be fixed in an intermediate position.
· Since it is all metal, it has excellent heat resistance.
· No key groove processing on the shaft side.
[Shape] Round
[Material] SS400 equivalent / S45C equivalent / SUS304 equivalent
[Screw type] Metric coarse
[Nominal designation] M10 × 0.75 to M150 × 2.0
[Type]Lock nut- Volume Discount
Configure nowStarting from∗ ： 3.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
DIN 981 Locknuts
REYHER
[Specifications]
・Type: Lock Nuts
・Material: Steel
・DIN 981
Steel made locknuts for rolling bearings.- Volume Discount
Configure nowStarting from∗ ： 5.62 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 71.18 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hydraulic Nuts - Series HMVC
BGL
Hydraulic Nuts are used to mount and dismount of rolling bearings with tapered bore. They can also be used for the dismounting of adapter or withdrawal sleeves.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1,490.95 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Slot nut / HM
BGL
Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat- 2D / 3D CAD data available
Configure nowStarting from∗ ： 208.95 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Lock Nuts - Series HMLL
BGL
Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat- 2D / 3D CAD data available
Configure nowStarting from∗ ： 80.32 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 8.73 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Nuts with lock washer / locking clip / integral locking device / Steel / Internal diameter 35-400mm
SKF
[Specifications]
・Inner Diameter(mm): 35-400
・Outer Diameter(mm): 52-470
・Width(mm): 9-52
・Material: Steel
[Features]
・SKF lock nuts provide a variety of ways to secure the nut onto a shaft
・Simple to install and reusable
[Applications]
・Lock nuts are used to locate bearings onto a shaft
・To mount bearings with a tapered bore onto tapered shaft seats and adapter sleeves, and to dismount bearings from withdrawal sleeves
・to secure gears, belt pulleys and other machine componentsConfigure nowStarting from∗ ： 18.47 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 8,525.77 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMV, Square Shape, with Locking Pins, Steel, Black Oxided
MAEDLER
Material: Steel, black oxided, contact surface ground.
Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.- Volume Discount
Configure nowStarting from∗ ： 9.54 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1.27 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Bearing Washer
SUNCO
[Shape] Round
[Material] Steel
[Surface treatment] None
[Screw type] Metric coarse
[Type] Tooth lock washer- Volume Discount
Configure nowStarting from∗ ： 2.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bearing Nut (Left-Hand Thread)
SUNCO
[Type] Lock nut
[Shape] Round
[Material] Steel
[Surface treatment] None
[Screw Type] Metric (coarse) thread
[Nominal thread] 10 × 0.75 to M200 × 3.0- Volume Discount
Configure nowStarting from∗ ： 5.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
6333SB AMF-TWINNUT nut - with collar
AMF
AMF-TWINNUT nut - with collar with hard detent.
Bright, strength class 10. The product is available per 1 peace.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 49.56 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Slotted locknuts, Stainless Steel
GANTER
On Stainless Steel-Slotted locknuts DIN 1804 the ground surface d3 stands proud and should be used as a mating surface.
The sizes M45x1,5 to M60x1,5 have 6 slots.- Volume Discount
Configure nowStarting from∗ ： 16.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lock Nuts - Series KML
BGL
Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat- 2D / 3D CAD data available
Configure nowStarting from∗ ： 32.93 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Nuts, self-locking
HALDER
Clamping nuts are used for rotating parts, especially for reversible shafts, for example for fixing the grinding wheel. The compact construction ensures a safe function and allows quick installation using a face pin wrench.Configure nowStarting from∗ ： 54.77 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 2.30 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1.82 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Hydraulic Nut, HYDNUT Series, Metric Fine Pitch Thread / Trapezoid Thread
FAG
HYDNUT..-E- Volume Discount
Configure nowStarting from∗ ： 3,942.28 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Slotted Round Nuts DIN 1804, Type w
MAEDLER
Material: type w = steel, black oxide finish, unhardened, unground.
At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.
From size M45x1.5, the nuts have 6 slots.- Volume Discount
Configure nowStarting from∗ ： 1.94 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts UW with Locking Device, Steel
MAEDLER
Material: Steel.
Strength min. 350 N/mm2.
Locking insert: Stainless Steel.
With these slotted nuts no additional lock washers, keyways or washers are required. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965.- Volume Discount
Configure nowStarting from∗ ： 13.14 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMT-R with Locking Pins
MAEDLER
Material: KMT-R: Stainless steel 1.4301 (AISI 304).
Strength min. 350 N/mm2.
Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up to 0.005 mm. Slotnut-design. Up to size 15 with two additional wrench flats.- Volume Discount
Configure nowStarting from∗ ： 23.72 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMTA with Locking Pins
MAEDLER
Material: Body of the nut steel, min. strength 350 N/mm2.
Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.- Volume Discount
Configure nowStarting from∗ ： 38.11 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts KMM, Single-Splitted, with Clamp Screw
MAEDLER
Material KMM:Steel, zinc-plated, hardness class 14 H.
Screw steel 12.9, zinc-plated.
Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.
Recommend tolerance for the shaft thread: 6g DIN ISO 965.- Volume Discount
Configure nowStarting from∗ ： 7.11 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locknuts GUK with Polyamide Insert, Self-locking, Steel, Zinc-plated
MAEDLER
Material: Steel, zinc-plated, hardness class 14 H.
These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.
Recommend tolerance for the shaft thread: 6g DIN ISO 965.
Temperature max. 100°C.- Volume Discount
Configure nowStarting from∗ ： 1.20 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Roller Bearing Retaining Nut HN Series
YOKOTA KIKOU
[Features]
· A shaft nut used for the rotating element of a machine which is designed to prevent loosening.Configure nowStarting from∗ ： 226.30 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Roller Bearing Retaining Washer and Clasp, ALL Clasp Series
YOKOTA KIKOU
[Features]
· Clasp for shafts that are used for the rotating elements of machines to prevent loosening.- Volume Discount
Configure nowStarting from∗ ： 20.76 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
HLB
SUNCO
Uses both the top nut (convex type) and bottom nut (concave type).
The top nut is perfectly circular with respect to the bolt, but the bottom nut has been eccentrically machined off-center with respect to the bolt.
[Features] Since the lower nut is eccentric, tightening the upper nut will apply a lateral force due to the wedging action. Friction to this male thread prevents loosening.
· Can be manually tightened to your desired position.
· Can be used repeatedly.
· HLB is for bearings.
[Shape] Round
[Material] SS400/S45C
[Nominal of Thread] M15X1.0/M10X0.75/M12X1.0/M17X1.0/M20X1.0/M25X1.5/M30X1.5/M35X1.5/M40X1.5/M45X1.5/M50X1.5/M55X2.0/M60X2.0/M65X2.0/M70X2.0/M75X2.0/M80X2.0/M85X2.0/M90X2.0/M95X2.0/M100X2.0/M105X2.0/M110X2.0/M115X2.0/M120X2.0/M125X2.0/M130X2.0/M135X2.0/M140X2.0/M145X2.0/M150X2.0/M155X3.0/M160X3.0/M165X3.0/M170X3.0/M175X3.0/M180X3.0/M185X3.0/M190X3.0/M195X3.0/M200X3.0
[Type] Lock Nut- Volume Discount
Configure nowStarting from∗ ： 14.72 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Super Bearing Nut
SUNCO
[Shape] Round
[Material] Steel
[Surface Processing] None / Chromate Plating
[Screw Type] Metric Coarse
[Nominal of Thread] M12X1.0/M15X1.0/M17X1.0/M20X1.0/M25X1.5/M30X1.5/M35X1.5/M40X1.5/M45X1.5/M50X1.5/M55X2.0/M60X2.0/M65X2.0/M70X2.0/M75X2.0/M80X2.0/M85X2.0/M90X2.0/M95X2.0/M100X2.0/M105X2.0
[Type] Lock Nut- Volume Discount
Configure nowStarting from∗ ： 13.99 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 249.78 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Lock Nuts - Series HML..T
BGL
Locknuts can be used to locate bearings on shafts or adapter sleeves. They also give easier mounting of bearings with a tapered shaft seat- 2D / 3D CAD data available
Configure nowStarting from∗ ： 143.40 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Lock Washers - Series MBL
BGL
These are an accessory for sleeves but they also have their own application. Their main purpose is to lock the KM and KML nuts preventing them from being released from the sleeve or the shaft itself.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.98 € Min. Shipping Days ： 21 Days *Unit price with basic configuration
-
Slotted locknuts / Steel / DIN 70852
GANTER
[Specifications]
・Material: ST. Steel
[Features]
・Slotted locknuts DIN 70852 serve fir adjusting the amount of play or for securing shaft-hub connections in an axial direction, for example
・The flat design of the slotted locknuts allows for especially space-saving installation- Volume Discount
Configure nowStarting from∗ ： 3.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Digital Dial Gauge for Hydraulic Nut
FAG
Dial gauge, digital for hydraulic nuts HYDNUT..-E and HYDNUT..-E-INCH- Volume Discount
Configure nowStarting from∗ ： 5,095.48 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 368.94 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 0.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Thread Nominal M |
| Shape |
| Material |
| Surface Treatment |
| Screw Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SKF | SKF | SKF | SKF | MAEDLER | MAEDLER | MAEDLER | FUJI SEIMITSU | SUNCO | REYHER | FAG | BGL | BGL | BGL | ZEN | SKF | FAG | MAEDLER | YOKOTA KIKOU | SUNCO | SUNCO | AMF | GANTER | BGL | HALDER | NKE BEARINGS | SKF | FAG | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | YOKOTA KIKOU | YOKOTA KIKOU | SUNCO | SUNCO | FAG | BGL | BGL | GANTER | FAG | FAG | INA |
| Product Series | Locknuts KMV, Square Shape, with Locking Pins, Steel, Black Oxided | Hydraulic Nut, HYDNUT Series, Metric Fine Pitch Thread / Trapezoid Thread | Locknuts GUK with Polyamide Insert, Self-locking, Steel, Zinc-plated | ||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 374.65 € *Unit price with basic configuration | 1,578.38 € *Unit price with basic configuration | 61.63 € *Unit price with basic configuration | 54.78 € *Unit price with basic configuration | 5.13 € *Unit price with basic configuration Volume Discount | 12.64 € *Unit price with basic configuration Volume Discount | 21.53 € *Unit price with basic configuration Volume Discount | 25.40 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 3.98 € *Unit price with basic configuration Volume Discount | 5.62 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 71.18 € *Unit price with basic configuration Volume Discount | 1,490.95 € *Unit price with basic configuration | 208.95 € *Unit price with basic configuration | 80.32 € *Unit price with basic configuration | 8.73 € *Unit price with basic configuration | 18.47 € *Unit price with basic configuration | 8,525.77 € *Unit price with basic configuration Volume Discount | 9.54 € *Unit price with basic configuration Volume Discount | 1.27 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.46 € *Unit price with basic configuration Volume Discount | 5.25 € *Unit price with basic configuration Volume Discount | 49.56 € *Unit price with basic configuration | 16.68 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 32.93 € *Unit price with basic configuration | 54.77 € *Unit price with basic configuration | 2.30 € *Unit price with basic configuration | 1.82 € *Unit price with basic configuration | 3,942.28 € *Unit price with basic configuration Volume Discount | 1.94 € *Unit price with basic configuration Volume Discount | 13.14 € *Unit price with basic configuration Volume Discount | 23.72 € *Unit price with basic configuration Volume Discount | 38.11 € *Unit price with basic configuration Volume Discount | 7.11 € *Unit price with basic configuration Volume Discount | 1.20 € *Unit price with basic configuration Volume Discount | 226.30 € *Unit price with basic configuration | 20.76 € *Unit price with basic configuration Volume Discount | 14.72 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 13.99 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 249.78 € *Unit price with basic configuration Volume Discount | 143.40 € *Unit price with basic configuration | 10.98 € *Unit price with basic configuration | 3.20 € *Unit price with basic configuration Volume Discount | 5,095.48 € *Unit price with basic configuration Volume Discount | 368.94 € *Unit price with basic configuration | 0.66 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 4 Days | 5 Days | 5 Days | 17 Days | 4 Days | 4 Days | 4 Days | Same day | 6 Days | Same day | 5 Days | 21 Days | 21 Days | 21 Days | 4 Days | 4 Days | 4 Days | 4 Days | Same day | 6 Days | 6 Days | 5 Days | Same day | 4 Days | 3 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 8 Days | 8 Days | Same day | Same day | 3 Days | 21 Days | 21 Days | 7 Days | 4 Days | 4 Days | 4 Days |
| Type | - | Lock Nuts | - | - | - | Lock Nuts | Lock Nuts with Tooth Lock Washer | Lock Nuts | Lock Nuts | Lock Nuts | - | - | Lock Nuts | Lock Nuts | Lock Nuts | - | - | Lock Nuts with Tooth Lock Washer | Tooth Lock Washers | Tooth Lock Washers | - | - | - | Lock Nuts | - | - | - | - | - | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts with Tooth Lock Washer | Lock Nuts | Lock Nuts with Tooth Lock Washer | Lock Nuts | Tooth Lock Washers | Lock Nuts | Lock Nuts | - | Lock Nuts | - | - | - | - | - |
| Thread Nominal M | - | M50x1,5 ～ Tr 490x5 | M25x1.5 ～ M40x1.5 | M10x0,75 ～ M95x2 | - | - | - | M15 ～ M50 | M10X0.75 ～ M150X2.0 | 10 x 0.75 ～ 170 x 3 | - | 1.967x18F" ～ 37.410x3F" | 8.628"x8F ～ 12.562"x6F | M 180x3 ～ Tr1215x8 | - | - | - | - | - | - | 6 ～ 18 | M6 ～ M24 | M 16 x 1,5 ～ M 60 x 1,5 | M120x2 ～ M200x3 | M20 | - | - | - | - | - | - | - | - | - | TM220x4 ～ TM330x5 | TM220x4 ～ TM420x5 | M12X1.0 ～ M65X2.0 | M12X1.0 ～ M100X2.0 | - | Tr205x4 ～ Tr1120x8 | - | - | - | - | - |
| Shape | - | Round Shape | - | - | Round Shape | - | - | Round Shape | Round Shape | Round Shape | - | Round Shape | Round Shape | Round Shape | - | - | - | - | Round Shape | Round Shape | Round Shape | - | - | Round Shape | - | - | - | - | Round Shape | - | - | - | - | - | Round Shape | Round Shape | Round Shape | Round Shape | - | Round Shape | Round Shape | - | - | - | - |
| Material | Steel | - | - | Steel | Steel | Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel | - | - | - | - | Stainless Steel | Steel | - | Steel | Stainless Steel | Steel | Steel | - | - | - | Steel | Steel | - | - | Steel | Steel | Stainless Steel | Steel | Steel | Steel | Stainless Steel | Stainless Steel | Steel | Steel | - | - | - | - | - | - | - |
| Surface Treatment | - | - | - | - | Surface Treatment Provided | None | None | Surface Treatment Provided | No Surface Treatment | No Surface Treatment | - | None | None | None | - | - | - | Black Oxide | No Surface Treatment | No Surface Treatment | - | - | - | None | - | - | Phosphate Coating | - | Black Oxide | None | None | Black Oxide | Zinc Plating | Zinc Plating | No Surface Treatment | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | - | None | None | - | - | - | - |
| Screw Type | - | - | - | - | - | - | - | Metric (Fine) Thread | Metric (Coarse) Thread | - | - | - | - | - | - | - | - | - | - | Metric (Coarse) Thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Metric (Fine) Thread | - | - | Metric (Coarse) Thread | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Thread Nominal M
- 0.391"x32F
- 0.469"x32F
- 0.586"x32F
- 0.664"x32F
- 0.781"x32F
- 0.969"x32F
- 1/2
- 1.173"x18F
- 1.376"x18F
- 1.563"x18F
- 1.767"x18F
- 1.967"x18F
- 1.967x18F"
- 2.157"x18F
- 2.157x18F"
- 2.360"x18F
- 2.360x18F"
- 2.548"x18F
- 2.548x18F"
- 2.751"x18F
- 2.751x18F"
- 2.933"x12F
- 2.933x12F"
- M3x0.35
- M3x0.5
- 3/8
- 3.137"x12F
- 3.137x12F"
- 3.340"x12F
- 3.340x12F"
- 3.527"x12F
- 3.527x12F"
- 3.730"x12F
- 3.730x12F"
- 3.918"x12F
- 3.918x12F"
- M4x0.5
- M4x0.7
- 4.122"x12F
- 4.122x12F"
- 4.325"x12F
- 4.325x12F"
- 4.716"x12F
- 4.716x12F"
- M5x0.5
- M5x0.8
- 5.106"x12F
- 5.106x12F"
- 5.497"x12F
- 5.497x12F"
- 5.888"x12F
- 5.888x12F"
- 6
- M6
- M6X0,5
- M6x0.75
- M6x1
- 6.284"x8F
- 6.284x8F"
- 6.659"x8F
- 6.659x8F"
- 7.066"x8F
- 7.066x8F"
- 7.472"x8F
- 7.472x8F"
- 7.847"x8F
- 7.847x8F"
- M8
- M8X0,75
- M8x0.75
- M8x1.0
- M 8 x 1
- M8x1.25
- 8.628"x8F
- 8.628x8F"
- 9.442"x6F
- 9.442x6F"
- M10
- M10x0,75
- M 10 x 0,75
- 10 x 0.75
- M10 x 0.75
- M10X0.75
- M10x0.75
- M 10x0.75
- M10X1
- M10x1
- M 10 x 1
- M10x1.5
- 10.192"x6F
- 10.192x6F"
- 11.004"x6F
- 11.004x6F"
- 11.785"x6F
- 11.785x6F"
- M12
- 12 x 1
- M12X1.0
- M12X1
- M12x1
- M 12 x 1
- M 12x1
- M 12 x 1,5
- M12x1.75
- 12.562"x6F
- 12.562x6F"
- 13.339x5F"
- M 14 x 1,5
- 14.170x5F"
- 14.957x5F"
- M15
- 15 x 1
- M15 x 1
- M15X1.0
- M15X1
- M15x1
- M15×1.00
- M 15 x 1
- M 15x1
- 15.745x5F"
- M16
- M 16 x 1,5
- M16x2
- 16.532x5F"
- M17
- 17 x 1
- M17X1.0
- M17X1
- M17x1
- M 17 x 1
- M 17x1
- 17.319x5F"
- 18
- M 18 x 1,5
- 18.107x5F"
- 18.894x5F"
- 19.682x5F"
- M20
- 20 x 1
- M20X1.0
- M20X1
- M20x1
- M20×1.00
- M 20 x 1
- M 20x1
- M 20 x 1,5
- M20x2.5
- 20.867x4F"
- M 22 x 1,5
- 22.048x4F"
- 23.623x4F"
- M24
- M 24 x 1,5
- M24x3
- 24.804x4F"
- M25
- M25X1,5
- M25x1,5
- M 25 x 1,5
- 25 x 1.5
- M25X1.5
- M25x1.5
- M25×1.50
- M 25x1.5
- M 26 x 1,5
- 26.379x4F"
- 27.961x3F"
- M 28 x 1,5
- 29.536x3F"
- M30
- M30X1,5
- M30x1,5
- M 30 x 1,5
- 30 x 1.5
- M30X1.5
- M30x1.5
- M 30x1.5
- M30x3.5
- 31.504x3F"
- M 32 x 1,5
- 33.473x3F"
- M35
- M35X1,5
- M35x1,5
- M 35 x 1,5
- 35 x 1.5
- M35 x 1.5
- M35X1.5
- M35x1.5
- M 35x1.5
- 35.441x3F"
- 37.410x3F"
- M 38 x 1,5
- M40
- M40X1,5
- M40x1,5
- M 40 x 1,5
- 40 x 1.5
- M40X1.5
- M40x1.5
- M 40x1.5
- M 42 x 1,5
- M45
- M45X1,5
- M45x1,5
- M 45 x 1,5
- 45 x 1.5
- M45X1.5
- M45x1.5
- M 45x1.5
- M 48 x 1,5
- M50
- M50X1,5
- M50x1,5
- M 50 x 1,5
- 50 x 1.5
- M50X1.5
- M50x1.5
- M 50x1.5
- M 52 x 1,5
- M55
- M 55 x 1,5
- M55x1.5
- M 55x1.5
- 55 x 2
- M55X2
- M55X2.0
- M55x2
- M55x2.0
- M 55 x 2
- M 55x2
- M 58 x 1,5
- M60
- M 60 x 1,5
- M60x1.5
- M 60x1.5
- 60 x 2
- M60X2
- M60X2.0
- M60x2
- M60x2.0
- M 60 x 2
- M 60x2
- M65
- M65x1.5
- M 65x1.5
- 65 x 2
- M65X2
- M65X2.0
- M65x2
- M 65x2
- M70
- M70x1.5
- M 70x1.5
- 70 x 2
- M70X2
- M70X2.0
- M70x2
- M 70x2
- M75
- M75x1,5
- M 75x1.5
- 75 x 2
- M75X2
- M75X2.0
- M75x2
- M 75x2
- M80
- 80 x 2
- M80X2
- M80X2.0
- M80x2
- M 80x2
- M85
- 85 x 2
- M85X2
- M85x2
- M 85x2
- M90
- 90 x 2
- M90X2
- M90X2.0
- M90x2
- M 90x2
- 94.742 mm
- M95
- 95 x 2
- M95X2.0
- M95x2
- M 95x2
- 99.517 mm
- M100
- 100 x 2
- M100X2
- M100X2.0
- M100x2
- M 100x2
- M105
- M105X2
- M105X2.0
- M105x2
- M110
- 110 x 2
- M110X2
- M110X2.0
- M110x2
- M 110x2
- M115
- 115 x 2
- M115X2
- M115X2.0
- M115x2
- 119.786 mm
- M120
- 120 x 2
- M120X2
- M120X2.0
- M120x2
- M 120x2
- M125
- 125 x 2
- M125X2
- M125X2.0
- M125x2
- 130 x 2
- M130X2
- M130X2.0
- M130x2
- M 130x2
- M130x3
- M 130x3
- M135
- 135 x 2
- M135X2.0
- M135x2
- 139.642 mm
- M140
- 140 x 2
- M140X2
- M140X2.0
- M140x2
- M 140x2
- M140x3
- M 140x3
- M145
- 145 x 2
- M145X2.0
- M145x2
- M150
- 150 x 2
- M150X2
- M150X2.0
- M150x2
- M 150x2
- M150x3
- M 150x3
- 155 x 3
- M155x3
- M160
- 160 x 3
- M160x3
- M 160x3
- M165x3
- 169.139 mm
- 170 x 3
- M170x3
- M 170x3
- 179.476 mm
- M180x3
- M 180x3
- 189.789 mm
- M190
- M190x3
- M 190x3
- 199.314 mm
- M200
- M200x3
- M 200x3
- TM205x4
- Tr205x4
- Tr 205x4
- Tr210x4
- Tr 210x4
- Tr215x4
- Tr 215x4
- TM220x4
- Tr220x4
- Tr 220x4
- Tr225x4
- Tr 225x4
- Tr230x4
- Tr 230x4
- TM235x4
- Tr235x4
- Tr 235x4
- 239.827 mm
- TM240x4
- Tr240x4
- Tr 240x4
- Tr250x4
- Tr 250x4
- TM260x4
- Tr260x4
- Tr 260x4
- Tr270x4
- Tr 270x4
- Tr275x4
- TM280x4
- Tr280x4
- Tr 280x4
- Tr290x4
- Tr 290x4
- Tr295x4
- TM300x4
- Tr300x4
- Tr 300x4
- Tr310x5
- Tr 310x5
- Tr315x5
- 319.075 mm
- TM320x5
- Tr320x5
- Tr 320x5
- TM330x5
- Tr330x5
- Tr 330x5
- Tr335x5
- TM340x5
- Tr340x5
- Tr 340x5
- Tr345x5
- Tr 345x5
- Tr350x5
- Tr 350x5
- Tr355x5
- TM360x5
- Tr360x5
- Tr 360x5
- TM365x5
- Tr365x5
- Tr 365x5
- Tr370x5
- Tr 370x5
- Tr375x5
- TM380x5
- Tr380x5
- Tr 380x5
- Tr385x5
- Tr 385x5
- Tr395x5
- Tr400x5
- Tr 400x5
- Tr410x5
- Tr 410x5
- Tr415x5
- TM420x5
- Tr420x5
- Tr 420x5
- Tr430x5
- Tr 430x5
- Tr435x5
- Tr440x5
- Tr 440x5
- Tr450x5
- Tr 450x5
- Tr460x5
- Tr 460x5
- Tr470x5
- Tr 470x5
- Tr480x5
- Tr 480x5
- Tr490x5
- Tr 490x5
- Tr500x5
- Tr510x6
- Tr520x6
- Tr530x6
- Tr540x6
- Tr550x6
- Tr560x6
- 560.019 mm
- Tr570x6
- Tr580x6
- Tr590x6
- Tr600x6
- 600.024 mm
- Tr610x6
- Tr625x6
- Tr630x6
- 630.022 mm
- Tr650x6
- Tr655x6
- Tr670x6
- 670.027 mm
- Tr680x6
- Tr690x6
- Tr695x6
- Tr710x7
- 710.209 mm
- Tr720x7
- Tr740x7
- Tr750x7
- 750.214 mm
- Tr760x7
- Tr775x7
- Tr780x7
- Tr800x7
- 800.202 mm
- Tr830x7
- Tr850x7
- 850.214 mm
- Tr880x7
- Tr900x7
- 900.201 mm
- Tr930x8
- Tr950x8
- 950.214 mm
- Tr980x8
- Tr1000x8
- Tr1035x8
- Tr1060x8
- Tr1095x8
- Tr1120x8
- Tr1155x8
- Tr1180x8
- Tr1215x8
-
Shape
-
Material
-
Surface Treatment
-
Screw Type
Brand
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
Categories related to Bearing Lock Nuts / Shaft Nuts / Locknuts
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.