Stepping Motors (Reduction Gear: Available)
A stepper motor is a motor that rotates in steps by a certain angle each time, like the second hand of a clock. A feature of these motors is the ability to perform fine positioning according to application. Available types include a 5-phase stepper motor that moves 0.72° per step and a 2-phase stepper motor that moves 1.8° per step. A stepper motor cannot operate by itself. A controller that outputs command pulse signals for the motor rotational amount and rotational speed, and a driver that controls the rotation of the stepper motor according to the pulse signals are required.
7 položek
* Informace o dnech dodání, přepravních nákladech a cenách
ORIENTAL MOTOR
This is a single motor (component) of the stepper motor unit.Více informacíType Square flange dimensions A(mm) Power Supply Voltage Specifications Control method Step angle(°) Holding torque (classification)(N·m) Reduction Gear Driving mode Motor Unit 60 - 200 AC Specification Open loop 0.012 Up to 4 Available - KonfigurovatBěžná cena (bez DPH):409.46 €Běžné datum odeslání:18 pracovních dnů
ORIENTAL MOTOR
[Features]・ Equipped with a newly developed ABZO sensor・ No external sensor required・ Reduction of origin return time・ No battery required・ Energy saving and low heat generation・ Three drivers to choose from to match your system configuration・ Easy operation that can be realized with the data setting software MEXE02Více informacíType Square flange dimensions A(mm) Power Supply Voltage Specifications Control method Step angle(°) Holding torque (classification)(N·m) Reduction Gear Driving mode Motor Unit 60 ～ 90 Single-Phase ～ Single-phase/ Three-phase DC Specifications / 200 AC Specification Closed Loop 0.36 Up to 0.7 ～ Up to 30 Available Bipolar KonfigurovatBěžná cena (bez DPH):448.08 €～Běžné datum odeslání:18 pracovních dnů
SHINANO KENSHI
Microstep Driver Integrated Controller and Stepping Motor Set CSA-UP Series
Various operations can be programed in 8 tables[Features]· Integrated controller function for small and lightweight drivers.· Various operations can be programed in 8 tables.· 4 levels of micro step division (1, 2, 4, 16) selectable.· Home return operation possible with origin sensor input.· Easy setting with the included dedicated application.· Input power supply: DVC24V.Error output function.· Abundant protection functions (excess heating, voltage and current).Více informacíType Square flange dimensions A(mm) Power Supply Voltage Specifications Control method Step angle(°) Holding torque (classification)(N·m) Reduction Gear Driving mode Set Product 42 ～ 60 Two-phase DC Specifications Open loop 1.8 - Available Unipolar KonfigurovatBěžná cena (bez DPH):290.36 €～Běžné datum odeslání:8 pracovních dnů
SHINANO KENSHI
Built-in Controller Stepping Motor "SSA-TR Series"
<Features>● An input pulse is not required as the motor, driver and controller are integrated into the motor flange size.● It is easy to set the operation with the included dedicated application.● Various operations can be programmed in 8 tables.● Micro step division (1, 2, 4, 16) selectable from 4 levels.● Design with special bracket for high heat dissipation.<Applications>● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.), positioning and constant rotation control.Více informacíType Square flange dimensions A(mm) Power Supply Voltage Specifications Control method Step angle(°) Holding torque (classification)(N·m) Reduction Gear Driving mode Motor 42 ～ 60 Two-phase DC Specifications Open loop 0.18 - Available Unipolar KonfigurovatBěžná cena (bez DPH):267.34 €～Běžné datum odeslání:8 pracovních dnů
SHINANO KENSHI
Built-in Speed Controller Stepping Motor "SSA-VR Series"
<Features>● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.● Abnormal rotation detection and automatic recovery are possible with the motor alone.● Speed control is made simple with analog input.● Wide speed control range (0 to 1800r/min).<Applications>● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.Více informacíType Square flange dimensions A(mm) Power Supply Voltage Specifications Control method Step angle(°) Holding torque (classification)(N·m) Reduction Gear Driving mode Motor 42 Two-phase DC Specifications Open loop 0.18 - Available Unipolar KonfigurovatBěžná cena (bez DPH):299.21 €Běžné datum odeslání:8 pracovních dnů
SHINANO KENSHI
Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit
Various operations can be programed in 8 tables[Features]· Integrated controller function for small and lightweight drivers.· Various operations can be programed in 8 tables.· 4 levels of micro step division (1, 2, 4, 16) selectable.· Home return operation possible with origin sensor input.· Easy setting with the included dedicated application.· Input power supply: DC24V.· Error output function.· Abundant protection functions (excess heating, voltage and current).Více informacíType Square flange dimensions A(mm) Power Supply Voltage Specifications Control method Step angle(°) Holding torque (classification)(N·m) Reduction Gear Driving mode Set Product 42 ～ 60 Two-phase DC Specifications Open loop 1.8 - Available Unipolar KonfigurovatBěžná cena (bez DPH):354.19 €～Běžné datum odeslání:8 pracovních dnů
SHINANO KENSHI
[Features]· Simultaneous 2 motors operation with one controller.· Oscillator (pulse generator) built in.· All motor operations can be set at numeric values.· Equipped with 2 speed setting function (internal setting value / external analog input).· Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.· Acceleration / deceleration setting: 0 to 99.99 seconds.· Current setting: 0 to 2.00A.· Continuous reciprocating rotation.· Stall detection function (input feedback time).· Lightweight and compact design: W70 × H90 × D33 mm, 190 g.Více informacíType Square flange dimensions A(mm) Power Supply Voltage Specifications Control method Step angle(°) Holding torque (classification)(N·m) Reduction Gear Driving mode Set Product 42 ～ 60 Two-phase DC Specifications Open loop - - Available Unipolar KonfigurovatBěžná cena (bez DPH):537.67 €～Běžné datum odeslání:8 pracovních dnů