Keyless Bushing (Fastening Fittings)（Page 2）

?* Information on days to ship and prices

• 

  Locking Assemblies 7005

  RINGFEDER

  Clamping set for high loads and suitable for alternating moments. Ideal for use in belt drums and flywheels.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7012

  RINGFEDER

  Clamping set with a narrow design. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7015

  RINGFEDER

  The self-centering precision clamping set for the transmission of maximum torques or axial forces with special demands on the concentricity of the parts to be clamped, as well as for applications subject to bending moments.Large transmittable circumferential forces - the long, shallow angles of the cones allow maximum torques or axial forces to be transmitted with a RfN 7015.0 clamping set. During assembly, the clamping set, shaft and hub remain in position relative to each other, thus ensuring additional safety in relation to 3-part construction types. Shaft and hub are only pressure loaded.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7061

  RINGFEDER

  Self-centering clamping set with rough surface pressure, the compact design is ideal for toothed disks.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7085

  RINGFEDER

  Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity. The clamping set is additionally nickel-plated.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  OPTIBELT Taper Bushing with Metric Bore

  OPTIBELT

  [Specifications]
  ・Shaft Bore Dia. d(Ø): 14-100
  ・Allowable Torque(N•m): 5.7-195
  ・Overall Length W(mm): 22.3-114.3
  ・Keyway: DIN 6885 Part 1, Shallow key
  ・Engineering material: 0.6020 (EN-GJL 200)

  Select to compare

  Configure now
  Starting from∗ ：	4.78 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-AS

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
  • For medium high torques. Like COM-A, but with slotted rings.
  • Not self-centering.
  • Self-releasing at dismounting.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.30 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 2517

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications

  ISEL

  Centering function suppresses outer circumference and terminal surface run-out. Stainless steel specifications.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	87.21 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mecha-Lock MT, General Purpose Type

  ISEL

  No drag when connecting for easy removal

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Locking Assemblies 7014

  RINGFEDER

  Clamping set for very high torques. The design allows maximum torques and axial forces to be transmitted with a clamping set.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7080

  RINGFEDER

  Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity. The clamping set is additionally nickel-plated.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Tapered Shaft Hubs, without lock nut, stainless steel mm / mm

  HALDER

  Select to compare

  Configure now
  Starting from∗ ：	51.69 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• 

  Locking Assemblies BAR

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Very good distribution of pressure.
  • Very good self-centering.
  • Self-releasing at dismounting.
  • Also suitable for large hub and shaft tolerances.
  • Slight axial offset possible during assembly.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	24.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1008

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.97 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1108

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 3525

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	38.30 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies TMK Version B

  MAEDLER

  Material Version B: Steel with corrosion protection (inner bush and nut nickel-plated, outer bush zinc-plated).
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Self-centering.
  • With a second hexagon to hold against while tightening the nut.
  • Axial offset during mounting (can be compensated by correct positioning).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Mecha Lock MA, Standard High-Torque Type

  ISEL

  Centering function suppresses outer circumference and terminal surface run-out. High torque specifications.
  
  [Features]
  · 21 models that have shaft diameters standardized from ø25 to ø150.
  · High torque transmission specifications.
  · With centering function.
  · Loose design of slope angle degrees produces a self-locking effect.
  · Hub internal diameter can be used with pass-through machining, wide range of options available during design

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	76.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing, Centering Type SES

  Save & Secure

  Centering type of keyless bushing. Abundant variations to choose from, with allowable torque from 6.2 to 13000N·m. The SS company manufactures a 20% share of the couplings in Taiwan. The company's are centered on China and Southeast Asia, and is trying to expand both its domestic and foreign shares.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing, Straight Type

  CAP

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	58 Days

  *Unit price with basic configuration

• 

  Keyless Bushing, Standard Type (with Centering Function)

  CAP

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.70 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-A Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-AK Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.96 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-AS Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	67.20 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing A.P.LOCK SAPL-B Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · SAPL-A Depending on the type, the cover outer diameter and bolt size are both large, providing comparatively high durability relative to the corresponding internal diameter.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPA Series

  SUNGIL

  [Features]
  · Made from aluminum.
  Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
  · High torque transmission power
  Uses high rigidity aluminum alloy to transmit torque, so it can be used not only with aluminum pulleys but also general steel pulleys.
  · Optimal for clean rooms
  Electroless nickel plating bolts are used standard for the aluminum main body materials, making it optimal for clean rooms.

  Select to compare

  Configure now
  Starting from∗ ：	20.88 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing A.P.LOCK SAPC Series

  SUNGIL

  [Features]
  · Made from aluminum.
  Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
  · Optimal for aluminum pulleys.
  When running a servo motor with a timing pulley, conventional friction connection units apply high pressure to the surfaces, which prevents the hub diameter from sitting properly and causes problems with slippage. The SAPC series uses servo motor torque specifications as the basis for reducing the bolt count and lowering pressure on surfaces, making it possible to connect to aluminum pulleys without difficulty.
  · Staged machining structure.
  Designed so that the push plate of the bearing could carry out its role, eliminating the need for the use of a separate bearing push plate.
  · Easy assembly and position setting.
  For conventional power locks, a space of 1 mm from there counterpart items is required to facilitate disassembly, but the SAPC series has a structure that is easy to disassemble even if there is no room for the hub to move during disassembly. Also, position setting is easy.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.71 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1108 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 1108
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	3.38 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1210 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 1210
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	7.26 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1215 with Metric Drill

  CONCAR

  [Specifications]
  ・Standard: DIN 6885 Part 1
  
  Tapered Clamping Bush 1215 with Metric Drill

  Select to compare

  Configure now
  Starting from∗ ：	5.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 3020 with Inch Drill

  CONCAR

  [Specifications]
  ・Type: 3020
  ・Body Material: Cast Iron
  ・Standard: British Standard BS 46 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	34.54 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 3525 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 3525
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	46.17 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 3535 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 3535
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	43.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 5050 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 5050
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	125.06 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7006

  RINGFEDER

  Universal clamping set for small installation space and axial stop ring. Self-centering and easy to install for medium to high torques.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies Stainless Steel 7110 SST

  RINGFEDER

  Specially small dimensioned self-centering Locking Assembly without axial displacement. As the locking screws are located out of the actual clamping area and the pressures are relatively low, the hub can be designed economically small. Through high-quality materials, the transmission of higher torques possible.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Shrink Disc 4061

  RINGFEDER

  Shrink disc for high torques. Compensation of smaller tolerances possible with simple assembly and disassembly.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Shrink Disc 4161

  RINGFEDER

  Two-piece shrink disk for high torque stress. Easy assembly by mounting stop. Good centering and concentricity properties.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies COM-CB3

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • 3 Ranges of sizes, for middle, higher and very high torques.
  • Compact size in axial direction.
  • Self-centering.
  • Self-locking.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies TT 3-16 mm

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For high torques.
  • Self-centering.
  • Axial offset during mounting (can be compensated by correct positioning).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	31.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes MSD-N

  MAEDLER

  Material: Stainless steel 1.4568 (17/7 PH).
  The MSD-N clamping bush is identical with the MSD bush, but is made from stainless steel. It has been used in many industries for years, as, e.g., the food, medical, automotive, chemical, printing and process engineering industries.
  Concentricity 0.03 - 0.06 mm.
  Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7.
  Temperature range: - 30 °C to + 85 °C.
  
  P_W ≈ 90N/mm², P_N ≈ 70N/mm²

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	306.34 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes MSD

  MAEDLER

  Material: Steel.
  The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted.
  Concentricity: ≈ 0.03 - 0.06 mm.
  Tolerance: Shaft h8 - k6 (for Prod. No. 615 215 00 only h7), Hub H7.
  Temperature range: -30 °C to 85 °C.
  
  P_W ≈ 90N/mm² P_N ≈ 70N/mm132

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	192.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Mecha-Lock MKT, Rust-Proof General Purpose Type, Electroless Nickel Plating Specifications

  ISEL

  No drag when connecting for easy removal. Electroless nickel plated product.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	106.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  KanaLock, Model KL201MA, Standard Type

  KATAYAMA CHAIN

  Assembling it suppresses hub terminal surface and outer circumference vibration, constraints gear interval backlash, and also reduces belt vibration noise caused by timing pulley vibration.
  
  [Features]
  · Assembling KL201MA suppresses hub terminal surface and outer circumference vibration, constraints gear interval backlash, and also reduces belt drive noise caused by timing pulley vibration.
  · Compatible shaft diameters are ø5 to ø85, and compatible shaft tolerances are g5, g6, h5, h6, h7, and h8

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	53.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...