Keyless Bushing (Fastening Fittings)（Page 4）

?* Information on days to ship and prices

• 

  Locking Assemblies COM-C, Stainless

  MAEDLER

  Material: Stainless steel 1.4401 (AISI 316).
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Self-centering.
  • No axial offset.
  Concentricity: 0.02 to 0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	70.20 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-CB1

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium high torques.
  • Self-centering.
  • Self-locking.
  • Axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.89 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-CB2

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. spur toothed gear or similar) on a shaft.
  • For medium high torques.
  • Self-centering.
  • Self-locking.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.26 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-D

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For high torques.
  • Self-centering.
  • Slight axial offset possible during assembly.
  Concentricity: 0.02 to 0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-L

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For very high torques.
  • Self-centering.
  • Slight axial offset possible during assembly.
  Concentricity: 0.02 to 0.04 mm.
  
  * When using in a stepped bore, the clearance C is to be foreseen for demounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	28.98 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-L, QPQ-Coated

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
  • For very high torques.
  • Self-centering.
  • Slight axial offset possible during assembly.
  Concentricity: 0.02 to 0.04 mm.
  
  * When using in a stepped bore, the clearance C is to be foreseen for demounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	33.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-LL

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For very high torques.
  • Self-centering.
  • Self-locking.
  • Axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	31.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-LLH

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. sprocket or similar) on a shaft.
  • For very high torques.
  • Very good distribution of pressure.
  • High resistant against bending forces.
  • Self-centering.
  • Self-locking.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	52.26 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-R

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For lower to medium torques.
  • Not self-centering.
  • Loose clamping rings. For use with customer's pressure sleeves and customer´s screws.
  • Up to 4 clamping sets can be used in line.
  • Versatile usage, for customized solutions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.72 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1210

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.94 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1215

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.09 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1610

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.91 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1615

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.41 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 3020

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 3030

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	31.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 4030

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	62.87 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 4040

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	72.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 4545

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	98.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 5050

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	131.46 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Welding Hubs for Taper Bushes

  MAEDLER

  Material: Steel (St52 or comparable), good weldable.
  Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft.
  Taper bush and chain plate wheel have to be ordered separately.
  Recommended bore tolerance: H8.
  Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink Disks ST-R, Stainless

  MAEDLER

  Material: Stainless steel 1.4057 (AISI 431).
  • For medium torques.
  • No axial shaft-hub movement.
  • Quick mounting.
  • Quick demounting.
  • Not self-centering.
  • Concentricity 0.02-0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	47.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink Disks ST-B

  MAEDLER

  Material: Steel.
  • For high torques.
  • No axial shaft-hub movement.
  • Quick mounting.
  • Quick demounting.
  • Not self-centering.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink Disks ST

  MAEDLER

  Material: High-quality steel.
  • For very high torques.
  • No axial shaft-hub movement.
  • Quick mounting.
  • Quick demounting.
  • Not self-centering.
  • Concentricity 0.02-0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.99 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Miniature Clamping Bushes MSM-N

  MAEDLER

  Material: Version MSM-N: Stainless steel 1.4305 (AISI 303).
  Concentricity: about 0.02 mm.
  Tolerance: Shaft k6-h10, Hub H8.
  
  P_W ≈ 90N/mm², P_N ≈ 70N/mm²

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	46.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Miniature Clamping Bushes MSM

  MAEDLER

  Material: Version MSM: Mild steel.
  Concentricity: about 0.02 mm.
  Tolerance: Shaft k6-h10, Hub H8.
  
  P_W ≈ 90N/mm², P_N ≈ 70N/mm²

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	43.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies TT 17-35 mm

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For high torques.
  • Self-centering.
  • Axial offset during mounting (can be compensated by correct positioning).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	39.57 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies SSGK

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For low torques.
  • Very short version.
  • Also suitable for small hub diameters.
  • Not self-centering.
  • Not self-locking.
  • Axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes MSD-N

  MAEDLER

  Material: Stainless steel 1.4568 (17/7 PH).
  The MSD-N clamping bush is identical with the MSD bush, but is made from stainless steel. It has been used in many industries for years, as, e.g., the food, medical, automotive, chemical, printing and process engineering industries.
  Concentricity 0.03 - 0.06 mm.
  Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7.
  Temperature range: - 30 °C to + 85 °C.
  
  P_W ≈ 90N/mm², P_N ≈ 70N/mm²

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	306.34 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes MSA

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium high torques and axial forces.
  • Minimal space requirement.
  • Self-centering.
  • Not self-locking.
  • Little axial movement during mounting.
  Concentricity: approx. 0.02 mm.
  Tolerance: Shaft h11 up to k6, Hub H7 up to H11.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	160.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes E-N

  MAEDLER

  Material: Stainless steel 1.405 (AISI 431).
  The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression.
  Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled.
  Concentricity: 0.02 mm.
  Tolerances: Shaft h7 for d = 15 mm.
  Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.
  Shaft h8 for the other diameters d.
  Hub H7.
  Temperature range: -30 oC to 85 oC.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	413.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes E

  MAEDLER

  Material: High-quality steel.
  The clamping bush consists of a double-walled steel sleeve filledwith a pressure medium, and a flange part. Inside the flange thereis a screw and a piston with seal to build up compression.
  Function: When the thrust screw is tightened, the sleeve expandsuniformly against shaft and hub, creating a rigid connectionthrough frictional force. When the thrust screw is loosened, thebush returns to its initial position and can be easily disassembled.
  Concentricity: 0.02 mm.
  Tolerances: Shaft h7 for d = 15 mm.
  Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.
  Shaft h8 for the other diameters d.
  Hub H7.
  Temperature range: -30°C to 85°C.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	247.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...