Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
ACCURATE
UltraSpring Compression Coil Springs
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire / Piano Wire / Oil Tempered Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding / Without Grinding | 0.21 ~ 2750.77 | 0.78 ~ 538.05 | 1 ~ 1015 | 0.6 ~ 135 | 0.4 ~ 115 | 0.029 ~ 737.627 |
MISUMI
Round Wire Coil Springs / Deflection 40%-60% / Configurable / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire / Piano Wire | - | With Grinding / Without Grinding | - | - | 15 ~ 250 | 5 ~ 27 | - | - |
MISUMI
Round Wire Coil Springs / Deflection 45% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 | With Grinding / Without Grinding | 0.15 ~ 35.3 | 1.25 ~ 44 | 5 ~ 80 | 2 ~ 20 | - | 0.05 ~ 0.98 |
MISUMI
Round Wire Coil Springs / Deflection 60%-75% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Piano Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 | Without Grinding | 0.38 ~ 23.5 | 1.25 ~ 36 | 5 ~ 90 | 3 ~ 27 | 2.3 ~ 24.4 | 0.1 ~ 0.5 |
SAMINI
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire / Piano Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding / Without Grinding | 0.81 ~ 7220 | - | 5 ~ 400 | 1.7 ~ 100 | - | 0.05 ~ 239 |
MISUMI
Round Wire Coil Springs / Deflection 40% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 | With Grinding / Without Grinding | 0.98 ~ 125.5 | 3 ~ 48 | 5 ~ 80 | 2 ~ 20 | - | 0.5 ~ 3.9 |
KS SANGYO
DS Series, Compression Coil Spring【1 až 20 kusů】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding | 4.7 ~ 707.1 | 3.4 ~ 253.7 | 4.4 ~ 490 | 3 ~ 68 | - | 0.116 ~ 97.857 |
MISUMI
Round Wire Coil Springs / Deflection 45% / I.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 | With Grinding / Without Grinding | 2.65 ~ 102.9 | 6 ~ 65 | 15 ~ 100 | 6.25 ~ 20.85 | 5 ~ 16 | 0.29 ~ 2.94 |
MISUMI
Round Wire Coil Springs / Deflection 40%-45% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Piano Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 | With Grinding / Without Grinding | 0.98 ~ 117.7 | 2.75 ~ 60 | 5 ~ 100 | 2 ~ 27 | 1.4 ~ 23.6 | 0.5 ~ 2.9 |
SHOWA SPRING
Compression Coil Spring, SWP-A/SUS304WP-B【1 až 20 kusů】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire / Piano Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding / Without Grinding | 2.33 ~ 1558.56 | - | 7 ~ 300 | 4.5 ~ 80 | - | 0.107 ~ 86.891 |
MISUMI
Round Wire Coil Springs / Deflection 25%-30% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Piano Wire | 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding / Without Grinding | 4.9 ~ 735.5 | 3.5 ~ 76 | 5 ~ 100 | 3 ~ 27 | 1.7 ~ 21.4 | 2.9 ~ 29.4 |
SAMINI
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Inconel | 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 | With Grinding / Without Grinding | 5.39 ~ 117.7 | - | 10 ~ 60 | 6 ~ 30 | - | 0.56 ~ 8.04 |
KS SANGYO
D Series Compression Coil Spring (DIN 2098 Standard)【1 až 20 kusů】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire / Piano Wire / Oil Tempered Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | With Grinding / Without Grinding | 0.181 ~ 4111.591 | 0.8 ~ 258.3 | 1 ~ 490 | 0.6 ~ 86.3 | - | 0.0294 ~ 232.26 |
MISUMI
Round Wire Coil Springs / Deflection 27%-30% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | With Grinding / Without Grinding | 3.4 ~ 353 | 3.25 ~ 60 | 5 ~ 80 | 4 ~ 20 | - | 2 ~ 14.7 |
TOKYO HATSUJYO MANUFACTURING
Round Wire Compression Coil Spring J Spring JA【10 až 20 kusů】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 | - | - | - | 5 ~ 50 | 2 ~ 14 | 1.48 ~ 12 | 0.07 ~ 4.71 |
MISUMI
Round Wire Coil Springs / Deflection 35%-40% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Piano Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 | With Grinding / Without Grinding | 2.9 ~ 171.6 | 3 ~ 65 | 5 ~ 100 | 3 ~ 27 | 1.9 ~ 22.8 | 1.5 ~ 4.9 |
MISUMI
[Clean & Pack]Round Wire Coil Springs - I.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | - | 0.74 ~ 294.3 | - | 10 ~ 100 | 3.46 ~ 22.4 | - | 0.098 ~ 9.81 |
KS SANGYO
K Series Compression Coil Spring (Japan Spring Manufactures Association Standard)【1 až 20 kusů】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | With Grinding / Without Grinding | 0.62 ~ 327.32 | 1.92 ~ 57.5 | 4 ~ 126 | 2 ~ 36 | - | 0.059 ~ 42.532 |
MISUMI
Round Wire Coil Springs / Deflection 15%-25% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | With Grinding / Without Grinding | 6.1 ~ 353 | 3.75 ~ 64 | 5 ~ 80 | 4 ~ 20 | - | 4.9 ~ 29.4 |
MISUMI
[Clean & Pack]Round Wire Coil Springs - O.D. Referenced Stainless Steel, UL/UTT
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 | - | 0.98 ~ 125.5 | - | 5 ~ 80 | 2 ~ 20 | - | 0.5 ~ 3.9 |
SAMINI
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Titanium Alloy | 30.01 to 50.00 / 50.01 to 73.00 | - | 49 ~ 56 | - | 15 ~ 25 | 12 | - | 4.1 ~ 9 |
MISUMI
[Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UY/UR/UF
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 | - | 0.15 ~ 35.3 | - | 5 ~ 80 | 2 ~ 20 | - | 0.05 ~ 0.98 |
SHINSEI HATSUJHO
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | - | - | - | - | 70 ~ 75 | 3.5 ~ 22.6 | - | - |
SHINSEI HATSUJHO
Compressed Spring, C Series【1 až 5 kusů】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 50.01 to 73.00 / 107.01 to 150.00 | Without Grinding | - | - | 29 ~ 126 | 6.5 ~ 36 | - | - |
SAMINI
Corrosion- and Acid-Resistant Spring
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Hastelloy | 4.51 to 8.50 / 16.01 to 30.00 / 30.01 to 50.00 | With Grinding | 7.11 ~ 31.2 | - | 10 ~ 60 | 6 ~ 12 | - | 0.81 ~ 2.91 |
SAMINI
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 4.51 to 8.50 / 8.51 to 16.00 | With Grinding | 5.685 ~ 13.253 | - | 200 ~ 350 | 97 ~ 147 | - | 49.4 ~ 194.9 |
DANLY
DANLY Spring Series (Round Wire)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 | - | 37.8 ~ 652.1 | 7.5 ~ 122 | 25 ~ 305 | 10 ~ 16 | 5 ~ 8 | 0.3 ~ 86.9 |
MISUMI
[Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UM/UH
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | - | 3.4 ~ 353 | - | 5 ~ 80 | 4 ~ 20 | - | 2 ~ 14.7 |
KIPP
Springs for clamp straps (K1554)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | - | - | 25 ~ 70 | - | 400 | - | 6.5 ~ 25 | - |
NORELEM
Springs for clamp straps (07650)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | - | - | 25 ~ 70 | - | 400 | - | 6.5 ~ 25 | - |
MISUMI
[Clean & Pack]Washers for Coil Springs - Shouldered
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | - | - | - | - | - | - | - | - |
SHINSEI HATSUJHO
Compressed Spring K Series【1 až 2 kusů】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | - | - | - | - | 30 ~ 105 | 11.5 ~ 22 | - | - |
SHINSEI HATSUJHO
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | - | - | - | - | 100 ~ 260 | 30 ~ 60 | - | - |