MISUMI
Flat Wire Coil Springs / Deflection 65% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 16.01 to 30.00 / 30.01 to 50.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | - | 29.4 ~ 392.3 | 7 ~ 105 | 20 ~ 300 | 11 ~ 42 | 7 ~ 31 | 0.45 ~ 12.07 |
TOKYO HATSUJYO MANUFACTURING
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 98.1 ~ 6100 | - | 10 ~ 500 | 8 ~ 70 | 4 ~ 38.5 | 3.07 ~ 198.61 |
TOKYO HATSUJYO MANUFACTURING
Strong Spring TM (Middle Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 137.3 ~ 8500 | - | 10 ~ 350 | 8 ~ 70 | 4 ~ 38.5 | 5.32 ~ 367.48 |
MISUMI
[Clean & Pack]Round Wire Coil Springs - I.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 | - | 0.74 ~ 294.3 | - | 10 ~ 100 | 3.46 ~ 22.4 | - | 0.098 ~ 9.81 |
TOKYO HATSUJYO MANUFACTURING
Strong Spring TF (Light Small Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 78.5 ~ 4000 | - | 10 ~ 500 | 8 ~ 70 | 4 ~ 38.5 | 1.91 ~ 94.07 |
TOKYO HATSUJYO MANUFACTURING
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 206 ~ 13000 | - | 10 ~ 350 | 8 ~ 70 | 4 ~ 38.5 | 10.78 ~ 736.11 |
MISUMI
Flat Wire Coil Springs / Deflection 40%-50% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 59 ~ 3920 | 5 ~ 250 | 10 ~ 500 | 6 ~ 70 | 3 ~ 38.5 | 2 ~ 112 |
MISUMI
Flat Wire Coil Springs / Deflection 60% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 68.6 ~ 588.4 | 6 ~ 120 | 15 ~ 300 | 10.5 ~ 43 | 6 ~ 31 | 1.09 ~ 19.61 |
MISUMI
Flat Wire Coil Springs / Deflection 50% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 78.5 ~ 1324 | 7.5 ~ 200 | 15 ~ 400 | 10.5 ~ 50 | 6 ~ 36 | 1.7 ~ 52.96 |
MISUMI
Flat Wire Coil Springs / Deflection 40% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 87.2 ~ 1570 | 12 ~ 180 | 20 ~ 300 | 10.5 ~ 52 | 5.5 ~ 37 | 2.73 ~ 65.42 |
MISUMI
Flat Wire Coil Springs / Deflection 32%-40% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 78 ~ 824 | 6 ~ 120 | 10 ~ 200 | 6 ~ 25 | 3 ~ 12.5 | 3.1 ~ 82.4 |
MISUMI
Flat Wire Coil Springs / Deflection 25%-32% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 98 ~ 1225 | 6.8 ~ 119 | 10 ~ 175 | 6 ~ 25 | 3 ~ 12.5 | 5.1 ~ 153 |
DANLY
DANLY Spring Series (Deformed Wire)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 150,50 ~ 9265.3 | 6.2 ~ 122 | 25 ~ 305 | 10 ~ 63 | 5 ~ 38 | 2.4 ~ 10000 |
TOKYO HATSUJYO MANUFACTURING
Strong Spring TB (Extra Heavy Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 230.01 to 580.00 / 580.01 or More | - | 343 ~ 18000 | - | 10 ~ 350 | 8 ~ 70 | 4 ~ 38.5 | 20.76 ~ 1285.71 |
SAMSOL
Mold Spring SF (Light Small Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | - | - | 10 ~ 500 | 8 ~ 70 | 4 ~ 38.5 | 1.666 ~ 112.014 |
MISUMI
Flat Wire Coil Springs / Deflection 19%-24% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 137 ~ 1833 | 7.6 ~ 133 | 10 ~ 175 | 6 ~ 25 | 3 ~ 12.5 | 9.5 ~ 306 |
NORELEM
Compression springs ISO 10243, moderate load (26001)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | - | - | - | - | 25 ~ 305 | 10 ~ 25 | 5 ~ 12.5 | - |
NORELEM
Compression springs ISO 10243, light load (26000)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | - | - | - | - | 25 ~ 305 | 10 ~ 25 | 5 ~ 12.5 | - |
TOKYO HATSUJYO MANUFACTURING
Strong Spring for High Deflection TU
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 150.01 to 230.00 / 230.01 to 580.00 | - | - | - | 15 ~ 300 | 10.5 ~ 43 | 6 ~ 31 | 1.09 ~ 19.61 |
NIPPON CHEMICAL SCREW
Polyetheretherketone / Plastic Spring PEEK / PB
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
PEEK | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 | Without Grinding | - | - | 20 ~ 50 | 3 ~ 25 | 2.2 ~ 20.5 | 0.06 ~ 1.57 |
NORELEM
Compression springs ISO 10243, heavy load (26002)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | - | - | - | - | 25 ~ 305 | 10 ~ 25 | 5 ~ 12.5 | - |
SAMSOL
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | - | - | 10 ~ 500 | 8 ~ 70 | 4 ~ 38.5 | 2.744 ~ 213.542 |
TOKYO HATSUJYO MANUFACTURING
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 8.51 to 16.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | - | - | 10 ~ 100 | 3 ~ 25 | 2 ~ 17 | 1.12 ~ 76.67 |
NIPPON CHEMICAL SCREW
Polyacetal / Plastic Spring POM / PB
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
POM | Up to 1.50 / 1.51 to 4.50 | Without Grinding | - | - | 8 ~ 17.2 | 2 ~ 9 | 1 ~ 7.5 | 0.027 ~ 2.18 |
MISUMI
Flat Wire Coil Springs / Deflection 16%-20% / O.D. Referenced
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 177 ~ 2403 | 8 ~ 140 | 10 ~ 175 | 6 ~ 25 | 3 ~ 12.5 | 14.8 ~ 481 |
MISUMI
[Clean & Pack]Round Wire Coil Springs - O.D. Referenced Stainless Steel, UL/UTT
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Stainless Steel Wire | Up to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 | - | 0.98 ~ 125.5 | - | 5 ~ 80 | 2 ~ 20 | - | 0.5 ~ 3.9 |
SAMSOL
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | - | - | 10 ~ 350 | 8 ~ 70 | 4 ~ 38.5 | 4.704 ~ 371.42 |
TOKYO HATSUJYO MANUFACTURING
Strong Spring for High Deflection TR
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | - | - | 20 ~ 300 | 14.5 ~ 46 | 9 ~ 32 | 1.74 ~ 27.24 |
SAMINI
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | 88 ~ 15362 | 10 ~ 240 | 20 ~ 300 | 10 ~ 70 | 5 ~ 38.5 | 2.8 ~ 853 |
KIPP
Springs for clamp straps (K1554)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | - | - | 25 ~ 70 | - | 400 | - | 6.5 ~ 25 | - |
NIPPON CHEMICAL SCREW
Polyetheretherketone / Cutting Plastic Spring PEEK / MPB
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
PEEK | Up to 1.50 / 1.51 to 4.50 | Without Grinding | - | - | 5 ~ 10 | 5 ~ 9 | 3 ~ 7 | 0.15 ~ 1.03 |
SAMSOL
Mold Spring (SR High Deflection)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | - | - | 20 ~ 300 | 10.5 ~ 46 | 6 ~ 32 | 1.76 ~ 27.24 |
TOKYO HATSUJYO MANUFACTURING
Round-Wire Coil Spring MR (Long Size)【2 kusů】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 50.01 to 73.00 / 73.01 to 107.00 | - | - | - | 300 | 6 ~ 8 | 3.6 ~ 5 | - |
TOKYO HATSUJYO MANUFACTURING
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 580.01 or More | - | - | - | 30 ~ 500 | 30 ~ 60 | 16 ~ 35 | 10.59 ~ 128.89 |
SUNCO
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
NIPPON CHEMICAL SCREW
Polyetheretherketone / Plastic Spring PEEK / PB
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
PEEK | Up to 1.50 / 1.51 to 4.50 | Without Grinding | - | - | 8 ~ 17.2 | 2 ~ 9 | 1 ~ 7.5 | 0.053 ~ 3.96 |
NORELEM
Compression springs ISO 10243, very heavy load (26003)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel Wire | - | - | - | - | 25 ~ 305 | 10 ~ 25 | 5 ~ 12.5 | - |
NIPPON CHEMICAL SCREW
Polyacetal / Plastic Spring POM / PB
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
POM | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 | Without Grinding | - | - | 20 ~ 50 | 8 ~ 25 | 4 ~ 20.5 | 0.09 ~ 1.01 |
NIPPON CHEMICAL SCREW
Polycarbonate / Plastic Spring PC / PB
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Polycarbonate | 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 | Without Grinding | - | - | 20 ~ 50 | 8 ~ 12 | 4 ~ 8 | 0.33 ~ 1.14 |
SAMSOL
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | - | - | 10 ~ 350 | 8 ~ 70 | 4 ~ 38.5 | 9.604 ~ 746.76 |
SAMSOL
Mold Spring SU (Ultra High Deflection)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | - | - | 15 ~ 300 | 10.5 ~ 43 | 6 ~ 31 | 1.078 ~ 19.208 |
NIPPON CHEMICAL SCREW
Polycarbonate / Plastic Spring PC / PB
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Polycarbonate | Up to 1.50 / 1.51 to 4.50 | Without Grinding | - | - | 8 ~ 17.2 | 2 ~ 9 | 1 ~ 7.5 | 0.038 ~ 2.34 |
SAMSOL
Mold Spring (SB Extra Heavy Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 230.01 to 580.00 / 580.01 or More | - | - | - | 10 ~ 350 | 8 ~ 70 | 4 ~ 38.5 | 18.42 ~ 1218.14 |
SAMSOL
Mold Spring (SG Ultra Heavy Load)
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Steel | 230.01 to 580.00 / 580.01 or More | - | - | - | 15 ~ 300 | 10 ~ 50 | 5 ~ 25 | 24.5 ~ 1262.24 |
TOKYO HATSUJYO MANUFACTURING
Round-Wire Coil Spring LR (Long Size)【2 kusů】
Material | Allowable Load (Configurable Range)(N) | End Surface Status | Allowable Load P2(N) | Height H2 at Allowable Load(mm) | Free Height Hf(mm) | Coil O.D. OD(mm) | Coil I.D. ID(mm) | Spring Constant k(N/mm) |
---|---|---|---|---|---|---|---|---|
Oil Tempered Wire | 8.51 to 16.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More | - | - | - | 300 | 3 ~ 25 | 2 ~ 17 | - |