Levelling Feet（Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  Levelling Feet / Steel / GN 339 / Diameter 29, 36

  GANTER

  Levelling feet GN 339 are used for applications in cases where no jointed link is required between foot and adjusting screw.
  For this reason they offer the advantage of reduced height.
  The gliding and/or the non-gliding protective cap is safely fixed in the foot.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Levelling Feet / GN 339

  GANTER

  Levelling feet GN 339 are used for applications in cases where no jointed link is required between foot and adjusting screw.
  For this reason they offer the advantage of reduced height.
  The gliding and/or the non-gliding protective cap is safely fixed in the foot.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Levelling feet for aluminium profiles (K0432)

  KIPP

  · Especially suitable for tables and light installations
  
  · Equipment foot height is adjusted by turning the nut by hand or spanner
  
  · Compatible with all conventional aluminium profiles with 8 mm or 10 mm slot width

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Anchor Stands for Aluminum Extrusions

  MISUMI

  
  

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.57 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rubber Cushion

  NIC AUTOTEC

  A rubber buffer that absorbs shocks. [Material] (1) SBR (2) EN 1.4016 Equiv.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.91 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rubber Washer

  NIC AUTOTEC

  This is a rubber seat for CLP-60, CLP-120, CLB-120U, CLBS-120U. [Material]Ethylene Propylene Rubber [EPDM].

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Plastic Foot

  YUKI LABORATORY

  [Applications]
  · Attach to the frame T-groove for use.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.32 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rubber Feet (Non-Migratory Specifications)

  YUKI LABORATORY

  [Applications]
  · Attach to the frame T-groove for use.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster for Corner

  YUKI LABORATORY

  [Features]
  · Structures can be brought close to each other or installed in corners.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Economy Type Adjuster

  YUKI LABORATORY

  [Features]
  · An adjuster with excellent cost performance.

  • Volume Discount

  • Stock

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Anchor Bracket (140S, 140W)

  NABESEI

  NABESEI, Adjuster Pad / Anchor, Anchor Bracket (140S・140 W)

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.58 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Adjustment plates for bull´s eye levels GN 2277

  GANTER

  Adjustment plates GN 2277.1 are used in combination with bull´s eye levels GN 2277, Type A.
  The mounting bore holes offset by 120° allow the bull‘s eye levels and the mounting plate to be aligned in relation to the mounting surface. An alignment ball at the bottom surface of the adjustment plate serves as tilting point. Specific tightening torques of the bolts allow to be achieved, so that the bubble is located inside the marking ring once the horizontal alignment is reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.02 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Bull's Eye Levels / GN 2279 / ALN, ALS / K Colourless-transparent

  GANTER

  Bull´s eye levels GN 2279 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.
  Type A is used if the spirit level is to be used as a tool, e.g. at different measuring points.
  The spirit levels are aligned in relation to the reference or contact surface, such that the bubble is located inside the marking ring once the horizontal position of the contact surface is reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.76 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Levelling feet with mounting lug, steel sheet, zinc plated, with and without rubber

  GANTER

  Levelling feet GN 42 will be delivered mounted and are not removable.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Levelling feet without mounting holes, Hygienic Design

  GANTER

  GN 20 levelling feet without mounting holes are intended for use in hygiene areas. The bottom seal protects the area beneath the foot plate from dirt. For this, the foot must be screwed on using the mounting holes and compressed accordingly. Hygienic fastenings and the correct position of the mounting holes are essential. The sealing ring above the adjustment sleeve enables fastening without dead space. Due to the wiper or the ball seal, the moving components are sealed against the environment.
  The high quality finish prevents adherence of dirt and facilitates cleaning.
  The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	132.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Levelling feet, foot / threaded bushing Stainless Steel

  GANTER

  Levelling feet GN 343.5 cannot be disassembled.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mounts for leveling feet

  GANTER

  GN 349 mounts are used on levelling feet particularly in such cases where a machine shrouding is made of very thin sheet metal.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Levelling Feet / GN 21

  GANTER

  Stainless Steel-Levelling feet GN 21 will be delivered mounted and are not removable.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	47.66 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Levelling feet with fixing lug, Steel, zinc plated, rectangular shape (GN 42)

  GANTER

  GN 42 levelling feet can be used in a host of combinations of base plates and adjustable spindle versions.
  >The levelling feet can be screwed to the mounting surface use the fixing lug, which prevents lateral shifting. Moreover, the types with the rubber underlay protect sensitive surfaces.
  The levelling feet are supplied fully assembled and are not removable.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.48 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Levelling sets, Steel (GN 360)

  GANTER

  GN 360 Levelling sets are used for leveling and to compensate for any slope when setting up machines and systems.The thread d2 can also be used as a through-hole for attachment from below. The fine thread d3 laws precise adjustment and readjustment using a DIN 1810 C-Spanner. A circlip limits the maximum path of adjustment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	104.12 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Levelling feet with fixing lug, rectangular shape (GN 43)

  GANTER

  GN 43 Stainless Steel-Levelling feet are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these levelling feat to be used in every situation.
  
  The levelling feet can be screwed to the mounting surface use the fixing lug, which prevents lateral shifting. Moreover, the types with the rubber underlay protect sensitive surfaces.
  
  The levelling feet are supplied fully assembled and are not removable.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.58 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Levelling feet, A4, with fixing lug, drop shape (GN 45)

  GANTER

  GN 45 Stainless Steel-Levelling feet are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these levelling feat to be used in every situation.
  
  The levelling feet can be screwed to the mounting surface use the fixing lug, which prevents lateral shifting. Moreover, the types with the rubber underlay protect sensitive surfaces.
  
  The levelling feet are supplied fully assembled and are not removable.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.08 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Levelling sets (GN 360)

  GANTER

  GN 360 Stainless Steel-Levelling sets are used for leveling and to compensate for any slope when setting up machines and systems.The thread d2 can also be used as a through-hole for attachment from below. The fine thread d3 laws precise adjustment and readjustment using a DIN 1810 C-Spanner. A circlip limits the maximum path of adjustment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	122.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Euro-Gripper-Tooling - Pedestal 80er, SW80-RD30-L90

  TUENKERS

  Pedestal 80er, SW80-RD30-L90

  • New Product

  Select to compare

  Configure now
  Starting from∗ ：	66.85 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Euro-Gripper-Tooling - Pedestal 50er, SW50-RD30-L90

  TUENKERS

  Pedestal 50er, SW50-RD30-L90

  • New Product

  Select to compare

  Configure now
  Starting from∗ ：	65.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Cover sleeves, Hygienic Design

  GANTER

  Stainless steel cover sleeves GN 20.1 are certified according to 3-A Sanitary Standards, Inc. guidelines and intended for use in hygienic areas.
  ・These cover protruding male threads while also substituting for lock nuts .The sealed mounting surfaces enable fastening without dead spaces.
  ・The high quality finish prevents adherence of dirt and facilitates cleaning.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...