Equipment Castors（Caster Type：Screw-In Type）

?* Information on days to ship and prices

• • Recommendation

  

  Levelling Castor, HRLK-ALTH Series

  BLICKLE

  Levelling Castor, with Fixed Foot and Height-Adjustable Wheel, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel Centre
  
  Bracket: HRLK series

  • strong pressed steel, zinc-plated, blue-passivated, Cr6-free
  • double ball bearing in the swivel head
  • swivel head seal
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
  • steel truck lock with rubber pad
  • height adjustment with lever

  Wheel: ALTH series

  • tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
  • wheel centre: die-cast aluminium, colour silver grey

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	215.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Recommendation

  

  Blickle Synthetic Swivel Castor Wave, LWG-TPA Series

  BLICKLE

  Blickle Synthetic Swivel Castor Wave, Colour Silver Grey, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre
  
  Bracket: LWG series

  • high-quality nylon 6, impact resistant
  • encapsulated, double-sealed, grooved ball bearing in the swivel head
  • bolt hole
  • colour silver grey RAL 7001
  • modern, appealing design

  Wheel: TPA series

  • tread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containing
  • wheel centre: high-quality polypropylene, impact resistant, colour silver grey RAL 7001

  Other features:

  • very high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
  • tread contains oil, may stain sensitive surfaces

  Select to compare

  Configure now
  Starting from∗ ：	28.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Foot Master Adjustable Castors, Swivel

  NANSIN

  A swivel caster. An adjuster is built-in to the caster.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	75.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pressed Steel Swivel Castor, LK-ALBS Series

  BLICKLE

  Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Aluminium Wheel Centre
  
  Bracket: LK series

  • strong pressed steel, zinc-plated, blue-passivated, Cr6-free
  • double ball bearing in the swivel head
  • strong central kingpin (from wheel Ø 125x50 mm)
  • swivel head seal
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: ALBS series

  • tread: high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, colour blue, non-marking, non-staining
  • wheel centre: die-cast aluminium, colour silver grey

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	96.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Duty Welded Steel Swivel Castor, LS-GB Series

  BLICKLE

  Heavy Duty Welded Steel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Cast Iron Wheel Centre
  
  Bracket: LS series

  • particularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-free
  • axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head
  • bolted and secured welded central kingpin, extremely strong
  • dust and splash-proof
  • grease nipple

  Wheel: GB series

  • tread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-staining
  • wheel centre: rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	339.25 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Pressed Steel Swivel Castor, L-ALTH Series

  BLICKLE

  Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel Centre
  
  Bracket: L series

  • pressed steel, zinc-plated, blue-passivated, Cr6-free
  • double ball bearing in the swivel head
  • strong central kingpin (from wheel Ø 150 mm)
  • swivel head seal
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: ALTH series

  • tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
  • wheel centre: die-cast aluminium, colour silver grey

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	67.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Castors / Stainless Steel / Screw-in Type

  MISUMI

  The main body is made of stainless steel, which makes this roller very effective in protecting against rust.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.76 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Screw-In Castors / Light / Medium Load

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.65 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Heavy Duty Welded Steel Swivel Castor, LS-GTH Series

  BLICKLE

  Heavy Duty Welded Steel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Cast Iron Wheel Centre
  
  Bracket: LS series

  • particularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-free
  • axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head
  • bolted and secured welded central kingpin, extremely strong
  • dust and splash-proof
  • grease nipple

  Wheel: GTH series

  • tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
  • wheel centre: rugged grey cast iron, lacquered, colour silver

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	297.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel Swivel Castor, LEX-PO Series

  BLICKLE

  Stainless Steel Swivel Castor, with Top Plate Fitting, Nylon Wheel
  
  Bracket: LEX series

  • high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
  • all parts including axle material are corrosion-resistant
  • double ball bearing in the swivel head
  • swivel head seal
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: PO series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural white

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Select to compare

  Configure now
  Starting from∗ ：	65.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pressed Steel Swivel Castor, LK-SPO Series

  BLICKLE

  Pressed Steel Swivel Castor, Heavy Duty Design, Nylon Heavy Duty Wheel
  
  Bracket: LK series

  • strong pressed steel, zinc-plated, blue-passivated, Cr6-free
  • double ball bearing in the swivel head
  • strong central kingpin (from wheel Ø 125x50 mm)
  • swivel head seal
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: SPO series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, extremely robust heavy-duty version, colour natural white

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Select to compare

  Configure now
  Starting from∗ ：	40.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, LSD-GB Series

  BLICKLE

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Cast Iron Wheel Centre
  
  Bracket: LSD series

  • particularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-free
  • axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head
  • bolted and secured welded central kingpin, extremely strong
  • dust and splash-proof
  • grease nipple

  Wheel: GB series

  • tread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-staining
  • wheel centre: rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	453.27 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Heavy Duty Welded Steel Swivel Castor, LS-GSPO Series

  BLICKLE

  Heavy Duty Welded Steel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel Made of Compressed Cast Nylon
  
  Bracket: LS series

  • particularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-free
  • axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head
  • bolted and secured welded central kingpin, extremely strong
  • dust and splash-proof
  • grease nipple

  Wheel: GSPO series

  • high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

  Other features:

  • high chemical resistance to many aggressive substances
  • reduced moisture absorption
  • operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
  • consider the surface pressure on sensitive floors due to high point loads

  Select to compare

  Configure now
  Starting from∗ ：	322.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Castors / Low Floor Type / Screw-in Type

  MISUMI

  [Features] A heavy duty roller with low mounting height and high running stability.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Castors for Clean Environment / Plate Type with Swivel

  MISUMI

  [Features] This roller is designed for clean rooms and uses a low dusting grease.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	168.76 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Pressed Steel Fixed Castor, B-ALTH Series

  BLICKLE

  Pressed Steel Fixed Castor, Medium Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel Centre
  
  Bracket: B series

  • pressed steel, zinc-plated, blue-passivated, Cr6-free

  Wheel: ALTH series

  • tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
  • wheel centre: die-cast aluminium, colour silver grey

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	61.13 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pressed Steel Swivel Castor, LH-ALB Series

  BLICKLE

  Pressed Steel Swivel Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Aluminium Wheel Centre
  
  Bracket: LH series

  • strong pressed steel, zinc-plated, blue-passivated, Cr6-free
  • heavy fork and top plate
  • double ball bearing in the swivel head
  • bolted and secured central kingpin, extremely strong
  • particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats

  Wheel: ALB series

  • tread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-staining
  • wheel centre: die-cast aluminium, colour silver grey

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	153.43 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel Light Duty Swivel Castor, LKRXA-PO Series

  BLICKLE

  Stainless Steel Light Duty Swivel Castor, with Bolt Hole, Nylon Wheel, LKRXA-PO Series
  
  Bracket: LKRXA series

  • high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
  • all parts including axle material are corrosion-resistant
  • double ball bearing in the swivel head
  • strong central kingpin
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: PO series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural white

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Select to compare

  Configure now
  Starting from∗ ：	60.83 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Light Duty Swivel Castor, LRA-VPA Series

  BLICKLE

  Light Duty Swivel Castor, with Bolt Hole Fitting, Wheel, with Solid Rubber Tyres, with Synthetic Rim, LRA-VPA Series
  
  Bracket: LRA series

  • pressed steel, zinc-plated, blue-passivated, Cr6-free
  • double ball bearing in the swivel head
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: VPA series

  • tyre: high-quality solid rubber, hardness 80 Shore A, colour grey, non-marking, non-staining
  • rim: high-quality nylon 6 or polypropylene in the electrically conductive version "-EL", impact resistant, colour black

  Other features:

  • high chemical resistance to many aggressive substances, except oils
  • operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

  Select to compare

  Configure now
  Starting from∗ ：	8.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, LSD-GTH Series

  BLICKLE

  Heavy Duty Welded Steel Twin Wheel Swivel Castor, Heavy Duty Swivel Head, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Cast Iron Wheel Centre
  
  Bracket: LSD series

  • particularly robust welded steel construction, zinc-plated, yellow-passivated, Cr6-free
  • axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head
  • bolted and secured welded central kingpin, extremely strong
  • dust and splash-proof
  • grease nipple

  Wheel: GTH series

  • tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
  • wheel centre: rugged grey cast iron, lacquered, colour silver

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	404.73 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Castors / Conductive / Screw-in Type

  MISUMI

  [Screw-in roller with antistatic wheel.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.91 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Duty Welded Steel Fixed Castor, BS-GSPO Series

  BLICKLE

  Heavy Duty Welded Steel Fixed Castor, Heavy Duty Wheel Made of Compressed Cast Nylon
  
  Bracket: BS series

  • particularly robust welded steel construction
  • zinc-plated, yellow-passivated, Cr6-free

  Wheel: GSPO series

  • high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

  Other features:

  • high chemical resistance to many aggressive substances
  • reduced moisture absorption
  • operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
  • consider the surface pressure on sensitive floors due to high point loads

  Select to compare

  Configure now
  Starting from∗ ：	211.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Levelling Castor, HRP-POA Series

  BLICKLE

  Levelling Castor, with Integrated Truck Lock and Top Plate Fitting, Nylon Wheel, HRP-POA Series
  
  Bracket: HRP series

  • die-cast aluminium, powder-coated, colour ivory
  • sealed ball bearing in the swivel head
  • steel top plate
  • truck lock made of hard rubber
  • height adjustment using wrench or integrated adjustment wheel
  • steel parts zinc-plated, blue-passivated, Cr6-free

  Wheel: POA series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, colour black

  Other features:

  • Load capacity determined under the following conditions:

    – speed: max. 1 km/h

    – temperature: +15 °C to +30 °C

    – hardness, horizontal tread without obstacles

    – route: A cooling off period of 15 minutes is required after a maximum of 50 m

  Select to compare

  Configure now
  Starting from∗ ：	49.85 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pressed Steel Swivel Castor, LK-ALTH Series

  BLICKLE

  Pressed Steel Swivel Castor, Heavy Duty Design, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel Centre
  
  Bracket: LK series

  • strong pressed steel, zinc-plated, blue-passivated, Cr6-free
  • double ball bearing in the swivel head
  • strong central kingpin (from wheel Ø 125x50 mm)
  • swivel head seal
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: ALTH series

  • tread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-staining
  • wheel centre: die-cast aluminium, colour silver grey

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	78.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Screw-In Caster Light/Medium Duty CSJTN□

  MISUMI

  [Features] Threaded castor for light to medium duty. -The wheel material is urethane.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.13 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pressed Steel Fixed Castor, BH-ALB Series

  BLICKLE

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Aluminium Wheel Centre, BH-ALB Series
  
  Bracket: BH series

  • pressed steel, zinc-plated, blue-passivated, Cr6-free
  • heavy fork and top plate

  Wheel: ALB series

  • tread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-staining
  • wheel centre: die-cast aluminium, colour silver grey

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	108.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Extra Heavy Duty Welded Steel Twin Wheel Fixed Castor, BSSD-GSPO Series

  BLICKLE

  Extra Heavy Duty Welded Steel Twin Wheel Fixed Castor, Extra Heavy Duty Swivel Head, Heavy Duty Wheel Made of Compressed Cast Nylon
  
  Bracket: BSSD series

  • particularly robust welded steel construction

  Wheel: GSPO series

  • high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beige

  Other features:

  • high chemical resistance to many aggressive substances
  • reduced moisture absorption
  • operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
  • consider the surface pressure on sensitive floors due to high point loads

  Select to compare

  Configure now
  Starting from∗ ：	18,254.02 €
  Min. Shipping Days ：	23 Days

  *Unit price with basic configuration

• 

  Pressed Steel Swivel Castor, LE-PO Series

  BLICKLE

  Pressed Steel Swivel Castor, with Top Plate Fitting, Nylon Wheel
  
  Bracket: LE series

  • pressed steel, zinc-plated, blue-passivated, Cr6-free
  • double ball bearing in the swivel head
  • swivel head seal
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: PO series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural white

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Select to compare

  Configure now
  Starting from∗ ：	19.44 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel Swivel Castor, LEX-PATH Series

  BLICKLE

  Stainless Steel Swivel Castor, with Top Plate Fitting Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre
  
  Bracket: LEX series

  • high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
  • all parts including axle material are corrosion-resistant
  • double ball bearing in the swivel head
  • swivel head seal
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: PATH series

  • tread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-staining
  • wheel centre: high-quality nylon 6, impact resistant, colour silver grey

  Other features:

  • very high chemical resistance to many aggressive substances
  • operating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Select to compare

  Configure now
  Starting from∗ ：	68.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Screw-In Caster Light/Medium Duty CMGN□

  MISUMI

  [Features] Threaded castor for light to medium duty use. -The wheels are made of synthetic rubber (standard), nylon and urethane.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Levelling Castor, HRIG-POA Series

  BLICKLE

  Levelling Castor, with Integrated Truck Lock and Bolt Hole, Nylon Wheel
  
  Bracket: HRIG series

  • die-cast aluminium, powder-coated, colour ivory
  • sealed ball bearing in the swivel head
  • hexagonal steel top plate
  • female thread in bolt hole
  • truck lock made of hard rubber
  • height adjustment using wrench or integrated adjustment wheel
  • steel parts zinc-plated, blue-passivated, Cr6-free

  Wheel: POA series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, colour black

  Other features:

  • Load capacity determined under the following conditions:

    – speed: max. 1 km/h

    – temperature: +15 °C to +30 °C

    – hardness, horizontal tread without obstacles

    – route: A cooling off period of 15 minutes is required after a maximum of 50 m

  Select to compare

  Configure now
  Starting from∗ ：	49.68 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pressed Steel Swivel Castor, LE-TPA Series

  BLICKLE

  Pressed Steel Swivel Castor, with Top Plate Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre
  
  Bracket: LE series

  • pressed steel, zinc-plated, blue-passivated, Cr6-free
  • double ball bearing in the swivel head
  • swivel head seal
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: TPA series

  • tread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containing
  • wheel centre: high-quality polypropylene, impact resistant, colour silver grey

  Other features:

  • very high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
  • tread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

  Select to compare

  Configure now
  Starting from∗ ：	19.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel Swivel Castor, LEXR-PO Series

  BLICKLE

  Stainless Steel Swivel Castor, with Bolt Hole Fitting, Nylon Wheel
  
  Bracket: LEXR series

  • high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
  • double ball bearing in the swivel head
  • strong central kingpin
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
  • all parts including axle material are corrosion-resistant

  Wheel: PO series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural white

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Select to compare

  Configure now
  Starting from∗ ：	64.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel Heavy Duty Swivel Castor, LKX-SPO Series

  BLICKLE

  Stainless Steel Heavy Duty Swivel Castor, with Top Plate Fitting, Nylon Heavy Duty Wheel
  
  Bracket: LKX series

  • high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
  • all parts including axle material are corrosion-resistant
  • double ball bearing in the swivel head
  • strong central kingpin (from wheel Ø 125x50 mm)
  • swivel head seal
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: SPO series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, extremely robust heavy-duty version, colour natural white

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Select to compare

  Configure now
  Starting from∗ ：	167.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pressed Steel Swivel Castor, L-PO Series

  BLICKLE

  Pressed Steel Swivel Castor, Medium Duty Design, with Top Plate Fitting, Nylon Wheel
  
  Bracket: L series

  • pressed steel, zinc-plated, blue-passivated, Cr6-free
  • double ball bearing in the swivel head
  • strong central kingpin (from wheel Ø 150 mm)
  • minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process

  Wheel: PO series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural white

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Select to compare

  Configure now
  Starting from∗ ：	23.70 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Castors / Double Lockable

  MISUMI

  Wheel stop and turning stop are possible with single-action. Has the effect of preventing the platform truck from slipping sideways.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Industrial Castors SSC Series, Swivel

  NANSIN

  A swivel caster. An industry standard that is highly compatible regardless of the manufacturer.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.87 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Anti-Static Castors III for Low Floor and Heavy Loads HJ-SJ HJB-SJ

  SISIKU ADDKREIS

  Please refer to P80 to 91 for detailed material on "Compatible wheels." Furthermore, viewing of the "Gatefold version" of this catalog is recommended.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	82.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Screw-in Type Castors 920EA / 915EA Wheel Diameter 75-125mm

  TAKIGEN(HAMMER CASTER)

  [Features]
  · A chrome-plated screw-in caster that is ideal for equipment that requires a good design and ease-of-use.
  · Used for a variety of applications such as medical beds, medical equipment, and the legs of work benches.
  · 915EA employs the total lock mechanism.
  · PR wheels have a cover.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.21 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Medium Class 300Hs Bolt Type Synthetic Rubber Wheel for Heavy Weights with Stopper (Packing Castors)

  UCHIMURA

  A compact screw-in type caster for heavy weights that is ideal for heavy equipment with a minimal mounting surface area.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	52.51 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Super Heavy Class 300X-N Bolt Type Nylon Wheel for Super Heavy Weights (Packing Castors)

  UCHIMURA

  Employs a high tensile material. Strength is doubled by heat treatment. Can turn with 1/3 the force of conventional products.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	118.68 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Pressed Steel Fixed Castor, BHF-ALEV Series

  BLICKLE

  Pressed Steel Fixed Castor, Heavy Duty Design, with Steel Spring, Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Aluminium Wheel Centre
  
  Bracket: BHF series

  • strong pressed steel, zinc-plated, blue-passivated, Cr6-free
  • heavy fork and top plate
  • robust spring structure with steel spring
  • maintenance-free spring mechanism

  Wheel: ALEV series

  • tyre: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, colour black
  • wheel centre: die-cast aluminium

  Other features:

  • high chemical resistance to many aggressive substances, except oils
  • operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C

  Select to compare

  Configure now
  Starting from∗ ：	273.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pressed Steel Fixed Castor, BK-SPO Series

  BLICKLE

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Nylon Heavy Duty Wheel, BK-SPO Series
  
  Bracket: BK series

  • strong pressed steel, zinc-plated, blue-passivated, Cr6-free

  Wheel: SPO series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, extremely robust heavy-duty version, colour natural white

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Select to compare

  Configure now
  Starting from∗ ：	26.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pressed Steel Fixed Castor, B-PO Series

  BLICKLE

  Pressed Steel Fixed Castor, Medium Duty Design, with Top Plate Fitting, Nylon Wheel
  
  Bracket: B series

  • pressed steel, zinc-plated, blue-passivated, Cr6-free

  Wheel: PO series

  • high-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural white

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Select to compare

  Configure now
  Starting from∗ ：	16.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Duty Welded Steel Fixed Castor, BS-GB Series

  BLICKLE

  Heavy Duty Welded Steel Fixed Castor, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Cast Iron Wheel Centre, BS-GB Series
  
  Bracket: BS series

  • particularly robust welded steel construction
  • zinc-plated, yellow-passivated, Cr6-free

  Wheel: GB series

  • tread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-staining
  • wheel centre: rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silver

  Other features:

  • high chemical resistance to many aggressive substances
  • operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Select to compare

  Configure now
  Starting from∗ ：	218.40 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...