Clamping Knobs (Stránka 5)

• 

  • Volume Discount

  KONISHI MFG

  Small Knob SKF

  Female screw made of polished black polypropylene resin. The thread part is made of steel, and the surface treatment is made by trivalent chromate treatment. Operating temperature max80° C min-20° C

  Více informací

  CAD:

  2D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Polygon	-	Female Thread	-	M8	6	-	N/A	Hexagon Shape

  Cena (bez DPH) od:

  3.24 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  MITSUBOSHI CI

  G Type Knob Bolt G-1 Black【1 až 150 kusů】

  Heat resistance ABS cost reduction is achieved by using resin, and the bolts and nuts are securely inserted and don't move, so there is no worry of them dropping out.

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Polygon	-	Male thread (stepped)	-	M5 ～ M6	10 ～ 50	-	-	Pentagon

  Cena (bez DPH) od:

  0.76 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  MITSUBOSHI CI

  Candy KNOB BOLT【1 až 100 kusů】

  [Features]● It is a knob that is shaped like candy.● Rich color variation.

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  T-Shaped	-	Male thread	-	M4 ～ M8	10 ～ 40	-	N/A	-

  Cena (bez DPH) od:

  1.13 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  MITSUBOSHI CI

  Push-In Rubber Nut

  [Features]· A nut that can be fastened without tools. It can be fastened either by hand-turning, or by being pushed on using the push mechanism.· Easy to fasten and won't come off easily.· Can also be used as a protective cap for fastened hex nuts. Resistant to vibration, making it useful for nut drop-out prevention as well. [Applications]· As a substitute (weight reduction) for SUS/iron nuts. [Resin Used]· Olefin-based elastomer resin

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Round shape	-	Female Thread	-	M4	10	Volume Knob Type	N/A	-

  Cena (bez DPH) od:

  0.49 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  TAKIGEN

  Stainless Steel Cruciform Knurled Knob A-1176-SP

  You can tighten it with a Phillips screwdriver. Made from stainless steel for superior corrosion resistance.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Round shape	-	Male thread	-	M3 ～ M6	6.5 ～ 13	Cylindrical	Knurled	-

  Cena (bez DPH) od:

  4.22 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  KYOWA

  Plastic Parts Tightening Handle Nut KRM-G Type

  Tighten firmly. Tightening handle nut. Main body Polygon (cross-shaped), Fastener type Female thread (M), Female thread, Round hole processing, Blind hole, Main body material Polyamide, Fastener material Brass, Fastener surface treatment None.

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Polygon	-	Female Thread	-	M5 ～ M12	9 ～ 16	-	N/A	Cross Shape

  Cena (bez DPH) od:

  3.25 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  DAIMARU BYORA SEISAKUSHO

  Grip Bolt, G Type【20 až 100 kusů】

  [Features]· Mass-produced to achieve a low cost. [Applications]· Various machinery, electrical equipment, medical equipment, electric tools, office equipment, etc.

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Polygon	-	Male thread	-	M5 ～ M10	10 ～ 50	-	-	Hexagon Shape

  Cena (bez DPH) od:

  34.10 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  TRUSCO NAKAYAMA

  Three-Lobe Knob, TKB Type/TKN Type

  ● It is a glossy surface product in which you can insert a molded bolt or specially processed reinforced plastic nut.● For machines, tools, office equipment, OA equipment etc.

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Polygon	-	Male thread / Female Thread	-	M5 ～ M10	-	-	N/A	Triangle

  Cena (bez DPH) od:

  2.18 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • SLEVA

  HALDER

  Knurled Nut DIN6303

  [Features]· For shape B, there is a pilot hole drilled for the pin hole. If drilling with the shaft, use a tolerance of H7.

  Více informací

  CAD:

  3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Round shape	-	Female Thread	-	M5 ～ M12	-	Clamp Shape	Knurled	-

  Cena (bez DPH) od:

  1.40 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA

  HALDER

  Tomy Nut DIN6305, With Movable Lever

  [Features] Rod is pressed in. -Fixing lever. [Material] Free-cutting steel.

  Více informací

  CAD:

  3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  T-Shaped	-	Female Thread	-	M8 ～ M20	-	-	-	-

  Cena (bez DPH) od:

  7.49 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA

  HALDER

  T Grip

  [Features] Suitable for frequent donning and doffing. [Material] Aluminium.

  Více informací

  CAD:

  3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  T-Shaped	-	Female Thread / Round Hole	-	6 ～ M10	-	-	-	-

  Cena (bez DPH) od:

  10.69 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA

  HALDER

  Star Grip DIN6336, Cast Iron

  [Features]· Sandblasted or tumbled· Special specification such as additional hole sizes and surface treatment are provided.

  Více informací

  CAD:

  3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Polygon	-	Female Thread / Female Screw (Stepped) / Round Hole / Other	-	6 ～ M16	-	-	-	Heptagon

  Cena (bez DPH) od:

  1.48 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  HALDER

  Star Grip DIN6336, Plastic

  [Features] Operating temperature range up to 110°C. -The handle material is thermosetting resin DIN7708 PF31.

  Více informací

  CAD:

  3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Polygon	-	Female Thread	-	M4 ～ M16	-	-	N/A	Heptagon

  Cena (bez DPH) od:

  0.80 €～

  Běžné datum odeslání:

  2 pracovních dnů

  Konfigurovat
• 

  • SLEVA

  HALDER

  Star Grip Stainless Steel, Machined

  [Features]· Shape without any places dust or filth to get caught and so is optimal for areas with stringent cleanliness conditions (for example foodstuff machinery).

  Více informací

  CAD:

  3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Round shape	-	Female Thread / Female Screw (Stepped) / Round Hole	-	M6 ～ M12	-	Fluted	-	-

  Cena (bez DPH) od:

  16.82 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA

  HALDER

  Flat Knurled Nut DIN467

  [Features] Hand-tightened nut with anti-slip grooves. -The round type is cylindrical.

  Více informací

  CAD:

  3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Round shape	-	Female Thread	-	M3 ～ M12	-	Cylindrical	-	-

  Cena (bez DPH) od:

  0.42 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA

  HALDER

  Knurled Bolt Plastic

  [Features]· Operating temperature range: from -30 to +80°C

  Více informací

  CAD:

  3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  Round shape	-	Male thread	-	M4 ～ M10	10 ～ 55	Clamp Shape	-	-

  Cena (bez DPH) od:

  0.99 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  ESCO

  Female Threaded Plastic Knob EA948BX-101

  【Product Specifications】・Material-Knob： polyamideThread： SUM22・Screw…M8 x 12・D…40・H…25・d…14

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  6.32 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Control knobs, Aluminium, black anodized

  The light grey cover of the control knobs GN 726 shrouds the fixing components as well as the shaft end. The cover also lends itself for a logo or other symbols.Made from an aluminum extrusion allows the manufacture of customized solutions in existing diameters at relatively low cost.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  9.04 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Control knobs, Stainless Steel

  Control knobs, Stainless Steel

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  18.32 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Flat Knurled screws, Stainless Steel

  All Stainless Steel-Flat knurled screws DIN 653 are produced from one piece and threaded over its full length.

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  2.48 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  GANTER

  Hand knobs with increased clamping force

  Hand knobs GN 6335.9 have a clamping contact area which is connected to the knob via an axial ball bearing. This has led to the following advantages:Doubled clamping force through vastly reduced friction. There is no movement on the contact area between star knob and component which greatly reduces any marking on the clamping area. In addition a reduced creep factor has been achieved by the indreased preload.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  27.86 €～

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Hand knobs, plastic, with threaded bolt, Steel

  Hand knobs GN 6335.4 comply with DIN 6335 type L.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	15 ～ 70	-	-	-

  Cena (bez DPH) od:

  0.88 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Hand knobs, Stainless Steel

  Hand knobs, Stainless Steel

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  9.52 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  GANTER

  Indexing mechanisms, Steel

  Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms.Besides the standard scale (Type AS) the control knob version may be supplied with any scale. In such cases, it is recommended to use the matt chrome plated version since the colour contrast is better.Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  70.76 €～

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Knurled screws with recessed stud for loss prevention

  Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	15 ～ 42	-	-	-

  Cena (bez DPH) od:

  2.12 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  GANTER

  Stainless Steel-Indexing mechanisms

  Stainless Steel-Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms.Besides the standard scale (Type AS) the control knob version may be supplied with any scale.Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  123.10 €～

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Stainless Steel-Knurled screws

  The knurling of the Stainless Steel-Knurled screws GN 535 allows a use in an environment with hygienic requirements.Specification

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  11.24 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Stainless Steel-Knurled screws with recessed stud for loss prevention

  Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	15 ～ 42	-	-	-

  Cena (bez DPH) od:

  5.22 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Stainless Steel-Star knobs

  Stainless Steel-Star knobs

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	20 ～ 55	-	-	-

  Cena (bez DPH) od:

  18.36 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Stainless Steel-Star knobs AISI 304

  The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  11.44 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  GANTER

  Stainless Steel-Star knobs AISI 316L (A4)

  The original ELESA design with 5 recess grips is typical for GN 5334.4 star knobs.This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  15.18 €～

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  GANTER

  Stainless Steel-Three-lobe knobs, AISI 316L

  Stainless Steel-Three-lobe knobs GN 5345.4 have a smooth and sealed surface. They are particularly suitable for use where hygiene requirements are high. Their shape allows relatively high torques to be applied.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  29.44 €～

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Stainless Steel-Wing nuts

  Stainless Steel-Wing nuts

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  5.72 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Star knobs with ball pin

  Star knobs GN 6336.11 have a ball pin whose diameter is smaller than the core diameter of the thread.The thrust pads are supplied unmounted.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	25 ～ 55	-	-	-

  Cena (bez DPH) od:

  2.06 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Star knobs with protruding Stainless Steel bushing

  Star knobs GN 6336.1 with all Stainless Steel bushing (main dimensions of DIN 6336) have important advantages:The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  4.02 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Star knobs, Brass insert

  Star knobs, Brass insert

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  1.08 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Star knobs, cast, iron, with steel threaded bolt steel

  Star knobs, cast, iron, with steel threaded bolt steel

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	16 ～ 70	-	-	-

  Cena (bez DPH) od:

  8.66 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  GANTER

  Star knobs, Duroplast

  Star knobs GN 6336.1 with bushing have important advantages:The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  2.00 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  GANTER

  Tommy nuts, with movable bar

  The movable bar of the tommy nut DIN 6307 is held in any position by the pressure spring.The plastic end caps limit the travel distance. They are pressed on with form-lock and may be supplied separately if the parts are to be electro-plated. The official DIN standard sheets provides for steel rings at this point.

  Více informací

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  15.66 €～

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  ELESA

  B.193 - Knurled grip knobs -Duroplast

  Phenolic based duroplast knurled knob.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	M3 ～ M12	6 ～ 40	-	-	-

  Cena (bez DPH) od:

  1.56 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  ELESA

  ESN. - Single wing nuts -Technopolymer

  Glass-fibre reinforced polyamide based technopolymer lever.The slightly concave marks on the wing help to position the fingers in order to apply the maximum force when turning.Glass-fibre reinforced polyamide based technopolymer ECA.W boss cap, in Elecolors colours, press-fit assembly.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	M6 ～ M10	-	-	-	-

  Cena (bez DPH) od:

  3.44 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  ELESA

  I.481+x - Cylindrical revolving handles -Duroplast

  Cylindrical revolving handles.Phenolic based (PF) Duroplast, black colour, glossy finish.Black-oxide steel shoulder screw, cylindrical-head with hexagon socket.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	M6 ～ M8	13 ～ 15	-	-	-

  Cena (bez DPH) od:

  4.87 €～

  Běžné datum odeslání:

  4 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  ELESA

  I.580 N - Cylindrical handles -Technopolymer

  Cylindrical handles.High-resilience polypropylene based (PP) technopolymer, black colour, matte finish.Blind hole.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	8 ～ 16	-	-	-	-

  Cena (bez DPH) od:

  1.46 €～

  Běžné datum odeslání:

  4 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  ELESA

  I.601+x - Cylindrical revolving handles -Technopolymer

  Cylindrical revolving handles.High-resilience polypropylene based (PP) technopolymer, black colour, matte finish.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	M6 ～ M12	13 ～ 20	-	-	-

  Cena (bez DPH) od:

  4.25 €～

  Cena (bez DPH) od:

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  ELESA

  I.631+x - Revolving handle -Technopolymer

  Revolving handle.High-resilience polypropylene based (PP) technopolymer, black colour, matte finish.Zinc-plated steel pin, hexagon socket at threaded end.

  Více informací

  CAD:

  2D

  /3D

  Main Body Type	Environmentally Friendly	Mounting Section Type	Properties / applications	Mounting Section Diameter d(mm) and/or Diameter	Mounting Section Length L(mm)	Round Type Category	Side Machining	Polygon, type
  -	-	-	-	M10	17	-	-	-

  Cena (bez DPH) od:

  8.60 €

  Běžné datum odeslání:

  4 pracovních dnů

  Konfigurovat