Clamping Levers（Application：Related Components）

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024
  • Recommendation

  

  Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.
  · The threaded part can be replaced.
  · Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
  · No scratches formed on the applicable parts as the seat surface does not move.
  · A high amount of pretension can be applied to the threaded part so it will not readily loosen.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.51 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Eccentric Lever Shaft Pin Included

  HALDER

  [Features]
  · Operating temperature range: plastic grip type maximum 60°C.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.96 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  For Axle Pin Eccentric Lever

  HALDER

  [Features] Used together with parts such as eccentric lever EH23390.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  For Positioning Ring Swing Clamp Size 40

  HALDER

  [Features]
  · After setting the swing clamp, the positioning ring is set to the main body and secured using a set screw.
  · With this ring, the clamp position of the swing clamp can be retained in a prescribed position.
  · The positioning ring direction can be mounted 360 degrees in any direction.
  · After mounting, the rotation angle of the swing clamp will be set 110 degrees to the right or to the left.
  · The clamp arm is pulled in to mount the positioning ring to the swing clamp.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Double Side Eccentric Lever Shaft Pin Included

  HALDER

  [Features]
  · Can be clamped in both directions.
  · Used in combination with DIN444 eye bolt M12 (EH22980).

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	67.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Clamp Nut Lever Weld Type

  HALDER

  [Features] cheaper version of DIN99. [Clamp Type] Clamping mechanism, "working direction" horizontal.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.11 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Screw Included

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.
  · The threaded part can be replaced.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Clamp Nut Lever Weld, Double Lever

  HALDER

  [Features] Double lever, can be operated with both hands. [Type of mounting part] Female thread.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included, Made Of Stainless Steel

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
  · If the lever is released, it returns to meshed status.
  · The threaded part can be replaced.
  · Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
  · No scratches formed on the applicable parts as the seat surface does not move.
  · A high amount of pretension can be applied to the threaded part so it will not readily loosen.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Holding Plates Quick-Release For Down-Hold Clamps

  HALDER

  [Features]
  · Using this mounting plate it is possible to mount downhold clamps, etc. to the T groove at any angle and position.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	79.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Nut Included, Internal Parts, Made Of Stainless Steel

  HALDER

  [Features]
  · Clamping lever enabling adjusting the lever position.
  · Internal parts are made of stainless steel.
  · Has a variety of uses including for medical devices and in the chemical industry.
  · When the lever is pulled up the serrations disengage, letting you freely change the lever position.
  · If the lever is released, it returns to meshed status.
  · The threaded part can be replaced.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.57 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Clamping Lever

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Ball Lever DIN99

  HALDER

  [Features] Operating parts. [Material] Steel, black oxide coating/stainless steel 1.4305 (corresponds to EN 1.4305 Equiv.), sandblasted.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Screw Included, Internal Parts, Stainless Steel

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
  · If the lever is released, it returns to meshed status.
  · Threaded part can be replaced
  · Internal parts are made of stainless steel.
  [Applications]
  · Clamping lever for adjusting lever position.
  · Has a variety of uses including for medical devices and in the chemical industry.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Nut Included

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.
  · The threaded part can be replaced.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Position Adjustable Clamping Lever Nut Included Thrust Bearing Included

  HALDER

  [Features]
  · Clamping lever enabling adjusting the lever position.
  · Internal parts are made of stainless steel.
  · Has a variety of uses including for medical devices and in the chemical industry.
  · When the lever is pulled up the serrations disengage, letting you freely change the lever position.
  · If the lever is released, it returns to meshed status.
  · The threaded part can be replaced.
  · Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
  · No scratches formed on the applicable parts as the seat surface does not move.
  · A high amount of pretension can be applied to the threaded part so it will not readily loosen.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ball and Spring for Snap Method (CLB)

  IMAO CORPORATION

  Ball and spring for snap method. Besides the CL lever, ECL lever or EGK grip knob can be used.
  
  [Features]
  · Optional items for the snap method of the below items.
  · ECL ergo controller lever.
  · CL controller lever.
  · EGK ergo grip knob

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Module For Securing With Screw Hole For Attaching Lever

  HALDER

  [Features]
  · Enables quick securing to a shaft providing a base to attach the lever.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.28 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

Loading...