Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Type
  • Length L *Figure in () is the min length of the adjustable type.(mm)
  • Operating Environment
  • Main Body Material
  • Additional Function
  • CAD
  • Detachable Hinges (Mounting Screw Hole Type: Countersunk Holes)

    Lift-off/flag hinges are fittings used to open and close doors and lids, and these types of hinges help install doors and lids by pulling out and inserting. They allow doors or lids to be installed/removed easily to/from the door frames without having to remove the hinges. There are 2 types of lift-off/flag hinges, one type has two leafs, a male leaf with an attached pin and a female leaf with a receptacle for the pin, and another type has the upper and lower leafs and an independent pin. Unlike other hinges, these hinges cannot be used in the horizontal direction; they must be used only in the vertical direction. Their materials are stainless steel, steel, resin, aluminum , zinc alloy, etc. Lift-off/flag hinges have right-hand, left-hand and reverse orientations. Make sure to select the correct hinge type. In order to control dispersion of metal powder due to wear, some have a built-in bearing in the sliding part and some have a resin cap.
      • Stainless Steel Lift-Off Hinge SHHPSL/SHHPSLC/SHHPSR/SHHPSRC
        • SLEVA
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        Stainless Steel Lift-Off Hinge SHHPSL/SHHPSLC/SHHPSR/SHHPSRC

        [Features] A universal stainless steel (EN 1.4301 Equiv. (sintered)) lift-off hinge.
        Více informací
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard41 ~ 113-Stainless SteelNot Provided36 ~ 80Not ProvidedFor Right Side / For Left Side
        Cena (bez DPH) od:
        6.48 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Flag hinges / conical countersunk / demountable / POM beech / extruded aluminium / MISUMI
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Flag hinges / conical countersunk / demountable / POM beech / extruded aluminium / MISUMI

        [Features] A universal aluminium sliding hinge. [Material] Main body EN AW-6063 Equiv.
        Více informací
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesFlag Type71.7 ~ 101.7-AluminumClear Anodize48 ~ 80Not ProvidedFor Right Side / For Left Side
        Cena (bez DPH) od:
        3.84 €
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Aluminium Lift-Off Hinge Countersunk Type
        • Order quantities extended (D-JIT)

        MISUMI

        Aluminium Lift-Off Hinge Countersunk Type

        [Features] An aluminium all-purpose lift-off hinge. The maximum opening and closing angle is approximately 270 degrees. This product can be inserted and removed.
        Více informací
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard47 ~ 63-AluminumClear Anodize36 ~ 62Not ProvidedFor Right Side / For Left Side
        Cena (bez DPH) od:
        5.47 €
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Corner hinges, plug-in / conical countersinks / stainless steel / barrel polished / MISUMI
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Corner hinges, plug-in / conical countersinks / stainless steel / barrel polished / MISUMI

        [Features] Stainless steel lift-off hinge that is compact and looks neat.
        Více informací
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard35 ~ 80-Stainless SteelTumble Polish8 ~ 14.5Not ProvidedFor Both Right and Left Sides
        Cena (bez DPH) od:
        13.10 €
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Flat plug-in hinges / conical countersinks / rolled / stainless steel / polished / TKN / TRUSCO NAKAYAMA
        • Volume Discount

        TRUSCO NAKAYAMA

        Flat plug-in hinges / conical countersinks / rolled / stainless steel / polished / TKN / TRUSCO NAKAYAMA

        [Features]· Detachable hinge made of stainless steel, with excellent in corrosion resistance[Uses]· For measurement equipment, communication equipment, machine tools, small doors
        Více informací
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard40StandardStainless SteelBuffed Surface30Not ProvidedFor Right Side / For Left Side
        Cena (bez DPH) od:
        13.57 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Flat plug-in hinges / conical countersinks / decorative pin / rolled / steel / lacquered, white / 225xxxxx / TRUSCO NAKAYAMA

          TRUSCO NAKAYAMA

          Flat plug-in hinges / conical countersinks / decorative pin / rolled / steel / lacquered, white / 225xxxxx / TRUSCO NAKAYAMA【2 kusů】

          [Features]· Easy on-site assembly[Uses]· Tool box, key box
          Více informací
          TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
          Detachable HingesStandard50.5 ~ 70StandardSteelCoating31 ~ 43Not ProvidedFor Right Side / For Left Side
          Cena (bez DPH) od:
          8.12 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat