Other Hinges and Hinge Accessory（Page 3）

?* Information on days to ship and prices

• 

  Corner hinges, plug-in / internal thread / Zinc / GN 161.1 / GANTER

  GANTER

  Hinges GN 161.1 are a variant with highly attractive design. The fixing screws are invisible.
  During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force.
  For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition.
  The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.20 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Corner hinges, plug-in / internal thread / Zinc / GN 161.2 / GANTER

  GANTER

  Hinges GN 161.2 are a variant with highly attractive design. The fixing screws are invisible.
  During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force. For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.40 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Hinge base plates / angle / zinc die-cast / 139.4-101 / GANTER

  GANTER

  The angled mounting plate GN 139.4 allows the hinges GN 139.1 / GN 139.2 to be attached between frame and door, i.e. the door gap.
  The long slotted holes allow the attachment to profile
  systems.
  Countersunk screws for fixing the hinges to the mounting plate are
  included part of the order.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.52 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Hinge Base Plates / slotted holes / steel / zinc plated / 139.3-170 / GANTER

  GANTER

  The flat mounting plate GN 139.3 allows the hinges GN 139.1 / GN 139.2 to be attached from the front.
  The long slotted holes allow the attachment to profile
  s ystems.
  Countersunk screws for fixing the hinges to the mounting plate are
  included part of the order.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Door hinges / internal thread / stainless steel / 139.6-76-126 / GANTER

  GANTER

  With the exception of the connector plug, the hinge without safety switch GN 139.6 do not differ in their external appearance from hinges with safety switch GN 139.5. With the concealed screw connection at the back, the hinge is also tamper-proof.
  The compact design combines safety and attractive appearance.
  The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	530.48 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Corner hinges / screw bolts / stainless steel / GN 129.2 / GANTER

  GANTER

  Stainless Steel-Hinges GN 129.2 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
  With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Corner hinges / screw bolts / stainless steel / GN 129.5 / GANTER

  GANTER

  Stainless Steel-Hinges GN 129.5 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
  With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.12 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Hinge base plates / internal thread / stainless steel / blank / 25160.07xx / HALDER

  HALDER

  [Specifications]
  ・Product type: Hinge base plates
  ・Material: Stainless steel 1.4301. matt. vibratory ground
  ・h(mm):3, 4
  ・d: M4, M5, M6, M8
  
  [Features]
  ・Threaded plates simplify the installation of hinges, without requinng an additional nut or washer
  ・Counter-holding while tightening is unnecessary

  Select to compare

  Configure now
  Starting from∗ ：	2.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Torque hinges / conical countersinks / resistance adjustable / zinc die-cast / black / 25160.05xx / HALDER

  HALDER

  [Materials]
  ・Friction cone: Thermoplastic POM
  ・Body: Zinc die-cast. plastic coated. black. similar to RAL 9005|. matt structure
  ・Hinge pin: Steel. zinc-plated by galvanization. passivated
  ・Nut: Steel. zinc-plated by galvanization. passivated
  
  [Features]
  ・These Hinges are characterised by their compact and stable construction , and by the ability to setthe friction
  ・The design ensures that the hinge has no play (either radially or axially)

  Select to compare

  Configure now
  Starting from∗ ：	11.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hinge spacer plates / stainless steel / 25160.06xx / HALDER

  HALDER

  [Specifications]
  ・Product type: Hinge spacer plates
  ・Material: Stainless steel 1.4301. matt. vibratory ground
  
  [Features]
  ・Spacer plates are used for height compensation when installing hinges

  Select to compare

  Configure now
  Starting from∗ ：	0.84 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hinge stops / taper countersinks / NBR / 25160.08xx / HALDER

  HALDER

  [Specifications]
  ・Product type: Hinge stops
  ・Holding plate materials: Steel investment casting. galvanised. plastic coated|. similar to RAL 9005. black. structural matt
  ・Stop: NBR
  
  [Features]
  ・Stops are used in order to restrict the hinges pivot angle
  ・The component also acts as a damping stop element.

  Select to compare

  Configure now
  Starting from∗ ：	5.64 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hinges, aluminium profiles / panel elements, three-part

  GANTER

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Bolt sets, hinge wing GN

  GANTER

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.02 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Hinges, aluminium profiles / panel elements, three-part, vertically stretched

  GANTER

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	40.46 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Block hinges with counterbore, long version (K1144)

  KIPP

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · Universal left and right application
  
  · For overlying doors
  
  · Version: galvanised steel or high-gloss chromed

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.19 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Block hinges with fastening nuts (K1338)

  KIPP

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · For flush-mounted constructions
  
  · Light and heavy versions
  
  · Stainless steel 1.4305, 1.4301

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.31 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Block hinges with fastening nuts, Form A (K1142)

  KIPP

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · For overlying or inlying doors
  
  · For overlying or inlying doors
  
  · Fastening material included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Connectors with screw fitting, Form A, straight bush (K1498)

  KIPP

  · Rated up to IP 67
  
  · High temperature range
  
  · With screw lock
  
  · A coded

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.04 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Connectors with screw fitting, Form B, angled bush (K1498)

  KIPP

  · Rated up to IP 67
  
  · High temperature range
  
  · With screw lock
  
  · A coded

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spring hinges steel or stainless steel 180 mm, spring closed (K1176)

  KIPP

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · Material: steel or 1.4301 stainless steel
  
  · Self-closing
  
  · Form B: with holes

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spring hinges steel or stainless steel 180 mm, spring open (K1176)

  KIPP

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · Material: steel or 1.4301 stainless steel
  
  · Self-opening
  
  · Form A: without holes

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Block hinges with fastening nuts, form A (27890)

  NORELEM

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · For overlying or inlying doors
  
  · For overlying or inlying doors
  
  · Fastening material included

  Select to compare

  Configure now
  Starting from∗ ：	10.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Connectors with screw fitting, form B, angled bush (80150)

  NORELEM

  · Rated up to IP 67
  
  · High temperature range
  
  · With screw lock
  
  · A coded

  Select to compare

  Configure now
  Starting from∗ ：	15.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Connectors with screw fitting, form A, straight bush (80150)

  NORELEM

  · Rated up to IP 67
  
  · High temperature range
  
  · With screw lock
  
  · A coded

  Select to compare

  Configure now
  Starting from∗ ：	14.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spring hinges steel or stainless steel 180 mm, spring closed (27903)

  NORELEM

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · Material: steel or 1.4301 stainless steel
  
  · Self-closing
  
  · Form B: with holes

  Select to compare

  Configure now
  Starting from∗ ：	31.04 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spring hinges steel or stainless steel 180 mm, spring open (27903)

  NORELEM

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · Material: steel or 1.4301 stainless steel
  
  · Self-opening
  
  · Form A: without holes

  Select to compare

  Configure now
  Starting from∗ ：	31.04 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Block hinges with counterbore, long version (27892)

  NORELEM

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · Universal left and right application
  
  · For overlying doors
  
  · Version: galvanised steel or high-gloss chromed

  Select to compare

  Configure now
  Starting from∗ ：	12.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Block hinges with fastening nuts, long version (27891)

  NORELEM

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · Universal left and right application
  
  · For overlying or inlying doors
  
  · Fastening material included

  Select to compare

  Configure now
  Starting from∗ ：	14.01 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Block hinges with fastening nuts (27890)

  NORELEM

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · For flush-mounted constructions
  
  · Light and heavy versions
  
  · Stainless steel 1.4305, 1.4301

  Select to compare

  Configure now
  Starting from∗ ：	25.57 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Block hinges with fastening nuts, Form B (27890)

  NORELEM

  · Connect two fixed components flexibly to each other
  
  · Application sectors: machine construction, furniture construction, doors, hatches, hoods
  
  · For overlying or inlying doors
  
  · For overlying or inlying doors
  
  · Fastening material included

  Select to compare

  Configure now
  Starting from∗ ：	7.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Connectors M8x1, bush with screw lock, unshielded, Form A, straight bush (K1874)

  KIPP

  · Rated up to IP 67
  
  · High temperature range
  
  · With screw lock
  
  · A coded

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Connectors M8x1, bush with screw lock, unshielded, Form B, angled bush (K1874)

  KIPP

  · Rated up to IP 67
  
  · High temperature range
  
  · With screw lock
  
  · A coded

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.63 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latch DIN 3133 (K1336)

  KIPP

  · Simple locking mechanism for covers, claddings and containers
  
  · Application sectors: machine and plant construction, container construction
  
  · Can be secured or sealed against unintentional loosening
  
  · Version: vibratory ground

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.57 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plates Form A for DIN 3133 latches (K1336)

  KIPP

  · Stainless steel
  
  · Vibration proof
  
  · Can be screwed on
  
  · Can be riveted

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.18 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plates Form B for DIN 3133 latches (K1336)

  KIPP

  · Stainless steel
  
  · Vibration proof
  
  · Can be screwed on
  
  · Can be riveted

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.18 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Security hinge switch, additional hinge (K1499)

  KIPP

  · For monitoring the position of safety doors, protective covers and protective hoods
  
  · Optimal integration into the surrounding construction
  
  · Switching angle freely adjustable
  
  · With mounting aid
  
  · Greater protection against manipulation

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Security hinge switch, Form A (K1499)

  KIPP

  · For monitoring the position of safety doors, protective covers and protective hoods
  
  · Optimal integration into the surrounding construction
  
  · Switching angle freely adjustable
  
  · With mounting aid
  
  · Greater protection against manipulation

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	152.11 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Security hinge switch, Form B (K1499)

  KIPP

  · For monitoring the position of safety doors, protective covers and protective hoods
  
  · Optimal integration into the surrounding construction
  
  · Switching angle freely adjustable
  
  · With mounting aid
  
  · Greater protection against manipulation

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	152.11 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Security hinge switches, long version, additional hinge (K1501)

  KIPP

  · For monitoring the position of safety doors, protective covers and protective hoods
  
  · Optimal integration into the surrounding construction
  
  · Switching angle freely adjustable
  
  · With mounting aid
  
  · Greater protection against manipulation

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	49.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Security hinge switches, long version, Form A (K1501)

  KIPP

  · For monitoring the position of safety doors, protective covers and protective hoods
  
  · Optimal integration into the surrounding construction
  
  · Switching angle freely adjustable
  
  · With mounting aid
  
  · Greater protection against manipulation

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	155.85 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Security hinge switches, long version, Form B (K1501)

  KIPP

  · For monitoring the position of safety doors, protective covers and protective hoods
  
  · Optimal integration into the surrounding construction
  
  · Switching angle freely adjustable
  
  · With mounting aid
  
  · Greater protection against manipulation

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	155.85 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hinge plate, steel or stainless steel (27616)

  NORELEM

  · Steel or stainless steel
  
  · Bright
  
  · Electro zinc-plated

  Select to compare

  Configure now
  Starting from∗ ：	5.88 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hinge, form B round, stainless steel (27876)

  NORELEM

  · Connect two fixed components flexibly to each other
  
  · Application sectors: food stuff, packaging, chemical and pharmaceutical industries.
  
  · Polished or blasted.

  Select to compare

  Configure now
  Starting from∗ ：	55.30 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hinge pins, polyamide green, sprung (27884)

  NORELEM

  · For right or left use.
  
  · For interior doors

  Select to compare

  Configure now
  Starting from∗ ：	2.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hinge, form A oval, stainless steel (27876-11)

  NORELEM

  · Connect two fixed components flexibly to each other
  
  · Application sectors: food stuff, packaging, chemical and pharmaceutical industries.
  
  · Polished or blasted.

  Select to compare

  Configure now
  Starting from∗ ：	42.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...