Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
JUNKOSHA
Junron Hybrid Tube (Inner-Layer Fluoride Polymer Tube), Junron AP1
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 | Up to 4 | 2.5 | Fluororesin | Up to 3 | Water / Air / General Hydraulic Oil | Standard / Sputter Resistant / Water Resistance / Oil Resistance / Chemical Resistance |
IFIELD
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Coil | Not Provided | 8 | Up to 8 | 5 | Urethane | Up to 5 | Air | Standard |
TRUSCO NAKAYAMA
Urethane Coiled Hose (with Plastic Coupling)
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Coil | Not Provided | 8 | Up to 8 | 5 | Urethane | Up to 5 | Air | Standard / Abrasion Resistance |
TRUSCO NAKAYAMA
Spiral Air Hose (with Coupling)
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Coil | Not Provided | 8 | Up to 8 | 5 | Urethane | Up to 5 | Air | Standard |
SMC
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2.5 ~ 8 | Urethane | Up to 3 ~ Up to 9 | Air | Standard / Pressure Resistance |
SMC
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 3.18 ~ 16 | Up to 4 ~ Up to 20 | 2.5 ~ 13 | Polyolefin Resin | Up to 3 ~ Up to 15 | Water / Air | Standard |
SMC
TPS, Clean Tube (Soft Polyolefin Tube)
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2.5 ~ 8 | Polyolefin Resin | Up to 3 ~ Up to 8 | Water / Air | Standard |
SMC
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | - | - | - | - | - | Water / Air | Standard |
SMC
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2 ~ 8 | Urethane / Polyolefin Resin | Up to 2 ~ Up to 8 | Air | Standard |
SMC
TQ, 2-Layer Soft Fluoropolymer Tubing
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2.5 ~ 9 | - | Up to 3 ~ Up to 9 | Water / Air | Standard |
SMC
Polyurethane Flat Tubing 10-TFU Series
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Flat | Not Provided | 4 | Up to 4 | 2.5 | Urethane | Up to 3 | Air | Standard / Clean Environment |
AOI
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | - | Up to 4 ~ Up to 15 | - | Urethane | Up to 3 ~ Up to 8 | Water / Air | Water Resistance / Abrasion Resistance |
MISUMI
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | - | - | - | Others | - | - | - |
MISUMI
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
- | Not Provided | 4 ~ 12 | - | 2 ~ 8 | Urethane | - | Air | - |
MISUMI
Tubes / Polyurethane / for Compressed Air
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 1.8 | - | 1.2 | Urethane | - | Water / Air | Water Resistance / Abrasion Resistance |
MISUMI
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 10 ~ 12.5 | - | 6.3 ~ 8.3 | Urethane | - | Air | - |
MISUMI
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 13 ~ 15 | - | 6.5 ~ 8 | Others | - | Air | - |
CKD
UP-94 Series for Air Fiber One-Touch Fitting
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 1.8 | Up to 2 | 1.2 | Urethane | Up to 2 | Air | Antistatic / For Vacuum |
CKD
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 3.2 ~ 12 | Up to 4 ~ Up to 15 | 2 ~ 9 | Nylon | Up to 2 ~ Up to 9 | Air | Standard |
NIHON PISCO
Straight Fluororesin (PFA) Tube for Piping in Clean Environments
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 6 ~ 12.7 | Up to 6 ~ Up to 15 | 4 ~ 9.56 | Fluororesin | Up to 4 ~ Up to 10 | Water / Air / Chemical | Standard / Clean Environment / Corrosion Resistant / Water Resistance / Heat Resistance / Weather Resistance |
NIHON PISCO
Straight Polyurethane Tube for Piping in Clean Environments
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 10 | Up to 4 ~ Up to 10 | 2.5 ~ 6.5 | Urethane | Up to 3 ~ Up to 7 | Water / Air | Standard / Clean Environment / Water Resistance |
NIHON PISCO
Cable and Hose Protection, Guide Device for Accommodating A Straight Slip Polyurethane Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2.5 ~ 8 | Urethane | Up to 3 ~ Up to 8 | Air | Standard |
NIHON PISCO
General Piping Coiled Nylon Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Coil | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2.5 ~ 9 | Nylon | Up to 3 ~ Up to 9 | Air | Standard |
NIHON PISCO
The Anti-Static Straight Anti-Static Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 3 ~ 12 | Up to 3 ~ Up to 15 | 2 ~ 8 | Urethane | Up to 2 ~ Up to 8 | Air | Standard / Antistatic |
TAIYO
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 6 | Up to 4 ~ Up to 6 | 2.5 ~ 4 | Urethane | Up to 3 ~ Up to 4 | Air | Standard |
CHIYODA TSUSHO
Twin Touch Tube TE water Resistant Polyurethane Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Flat | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2.5 ~ 8 | Urethane | Up to 3 ~ Up to 8 | Water / Air | Standard / Water Resistance / For Vacuum / Abrasion Resistance / Oil Resistance |
CHIYODA TSUSHO
Touch Tube TP Polyurethane Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2 ~ 8 | Urethane | Up to 2 ~ Up to 8 | Air | Standard / For Vacuum / Abrasion Resistance / Oil Resistance |
CHIYODA TSUSHO
Twin Touch Tube TP Polyurethane Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Flat | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2.5 ~ 8 | Urethane | Up to 3 ~ Up to 8 | Air | Standard / For Vacuum / Abrasion Resistance / Oil Resistance |
CHIYODA TSUSHO
Touch Tube, TE-EP Antistatic Polyurethane Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2.5 ~ 8 | Urethane | Up to 3 ~ Up to 8 | Air | Standard / Antistatic / Water Resistance / Abrasion Resistance / Oil Resistance |
CHIYODA TSUSHO
One Touch SP Soft Polyurethane Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 6 | Up to 4 ~ Up to 6 | 2.5 ~ 4 | Urethane | Up to 3 ~ Up to 4 | Air | Standard / For Vacuum / Oil Resistance |
CHIYODA TSUSHO
One Touch SP Soft Polyurethane Tube Spiral
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Coil | Not Provided | 4 ~ 6 | Up to 4 ~ Up to 6 | 2.5 ~ 4 | Urethane | Up to 3 ~ Up to 4 | Air | Standard / For Vacuum / Oil Resistance |
CHIYODA TSUSHO
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 4 ~ 12 | Up to 4 ~ Up to 15 | 2.5 ~ 9 | Nylon | Up to 3 ~ Up to 9 | Air | Standard / Pressure Resistance / For Vacuum / Heat Resistance / Oil Resistance |
CHIYODA TSUSHO
P-Flex Series, Hot Water Resistant Polyurethane Tubes
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 8 ~ 12 | Up to 8 ~ Up to 15 | 5 ~ 8 | Urethane | Up to 5 ~ Up to 8 | Water / Air | Standard / Water Resistance / For Vacuum / Heat Resistance |
CHIYODA TSUSHO
Water Resistant Multi-Spiral Tubes MES Series
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Coil | Not Provided | 6 ~ 12 | Up to 6 ~ Up to 15 | 4 ~ 8 | Urethane | Up to 4 ~ Up to 8 | Water / Air | Standard / Water Resistance / For Vacuum / Abrasion Resistance / Oil Resistance |
CHIYODA TSUSHO
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Coil | Not Provided | 4 ~ 8 | Up to 4 ~ Up to 8 | 2.5 ~ 5 | Urethane | Up to 3 ~ Up to 5 | Air | Standard / Water Resistance / For Vacuum / Abrasion Resistance / Oil Resistance |
CHIYODA TSUSHO
TE-AF Type Sputter Resistant Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 6 ~ 12 | Up to 6 ~ Up to 15 | 4 ~ 8 | Urethane | Up to 4 ~ Up to 8 | Water / Air | Standard / Sputter Resistant / Water Resistance / For Vacuum / Abrasion Resistance / Oil Resistance |
CHIYODA TSUSHO
L-Flex Polyurethane Tube for Sputtering Prevention
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 8 ~ 14 | Up to 8 ~ Up to 15 | 4 ~ 8 | Polyolefin Resin | Up to 4 ~ Up to 8 | Water / Air | Standard / Sputter Resistant / Water Resistance / For Vacuum / Heat Resistance / Oil Resistance |
CHIYODA TSUSHO
Twin L-Flex Sputter Preventing Polyurethane Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 12 | Up to 15 | 6.5 | Polyolefin Resin | Up to 7 | Water / Air | Standard / Sputter Resistant / Water Resistance / For Vacuum / Heat Resistance / Oil Resistance |
CHIYODA TSUSHO
Slim L-Flex Sputter Preventing Polyurethane Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 7 ~ 13 | Up to 7 ~ Up to 15 | 4 ~ 8 | Polyolefin Resin | Up to 4 ~ Up to 8 | Water / Air | Standard / Sputter Resistant / Water Resistance / For Vacuum / Heat Resistance / Oil Resistance |
CHIYODA TSUSHO
ALE Type L-Flex Sputtering Resistant Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 8.2 ~ 14.2 | Up to 9 ~ Up to 15 | 4 ~ 8 | Polyolefin Resin | Up to 4 ~ Up to 8 | Water / Air | Standard / Sputter Resistant / Water Resistance / For Vacuum / Heat Resistance / Oil Resistance |
CHIYODA TSUSHO
Cover Tube Sputter Preventing Polyurethane Tube
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 8 ~ 14 | Up to 8 ~ Up to 15 | 4 ~ 8 | Others | Up to 4 ~ Up to 8 | Air | Standard / Sputter Resistant / Water Resistance / For Vacuum / Heat Resistance / Oil Resistance |
CHIYODA TSUSHO
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Related Components | Not Provided | - | - | - | - | - | - | - |
CHIYODA TSUSHO
Zero One Series Spiral Zero One
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Coil | Not Provided | 8 | Up to 8 | - | Urethane | - | Air | Standard |
CHIYODA TSUSHO
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
Straight | Not Provided | 6 ~ 16 | Up to 6 ~ Up to 20 | 4 ~ 11 | Urethane | Up to 4 ~ Up to 15 | Air | Standard / For Vacuum / Oil Resistance |
MUROMOTO TEKKO
Type | Cutting Service Usage | Outer Diameter D(Ø) | O.D. [Distinction] | Inner Diameter d(Ø) | Material | I.D. [Distinction] | Applicable Fluid | Operating Environment |
---|---|---|---|---|---|---|---|---|
- | Not Provided | 10 | Up to 10 | 6.5 | Urethane | Up to 7 | Air | Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance |