Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Screw Nominal (M)
  • Length L (mm)
  • Material
  • Surface Treatment
  • Additional Shape
  • Thread Type
  • Basic Shape
  • Sales Unit
  • CAD
  • Self Tapping Screws, Taptite High Tech Screws (Material: Stainless Steel)

      • Cross Recessed Binding Head Tapping Screws, 2 Models Grooved B-1 Shape
        • SLEVA
        • Volume Discount

        SUNCO

        Cross Recessed Binding Head Tapping Screws, 2 Models Grooved B-1 Shape【1 až 2000 kusů】

        The tip is cut by 1/4, with the cut portion acting like a blade to trim the target material.
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Binding Head3 ~ 46 ~ 25Stainless SteelBlack Painted / Not Provided / DacrotizedCross RecessedFlat EndStandardSelf Tapping Screws
        Cena (bez DPH) od:
        0.08 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Cross Recessed Pan Head Tapping Screws, 2 Models B-0 Shape
        • SLEVA
        • Volume Discount

        SUNCO

        Cross Recessed Pan Head Tapping Screws, 2 Models B-0 Shape【1 až 3000 kusů】

        Tapered down to the top 2.5-3 threads, providing a finer pitch than type 1.
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Pan Head3 ~ 46 ~ 25Stainless SteelBlack Painted / Not ProvidedCross RecessedFlat EndStandardSelf Tapping Screws
        Cena (bez DPH) od:
        0.14 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Cross Recessed Flat Head Tapping Screws, 2 Models B-0 Shape
        • SLEVA
        • Volume Discount

        SUNCO

        Cross Recessed Flat Head Tapping Screws, 2 Models B-0 Shape

        Tapered down to the top 2.5 to 3 threads, providing a finer pitch than type 1.
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Flat Head36Stainless SteelNot ProvidedCross RecessedOther Special ShapesStandardSelf Tapping Screws
        Cena (bez DPH) od:
        1.63 €
        Speciální cena
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Tap-Tight P Type Pan
        • SLEVA
        • Volume Discount

        SUNCO

        Tap-Tight P Type Pan【1 až 10000 kusů】

        · Materials: Steel, Stainless steel (SUS410) · Surface treatment: None, non-chrome, non-chrome (zinc plating) chromate color, non-chrome (zinc plating) black, non-chrome black, trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, nickel plating, black nickel, chrome plating, stainless steel coating, stainless steel coating, trivalent stainless steel coating, CU plating, black paint
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Pan Head2 ~ 54 ~ 30Stainless SteelBlack Painted / Not ProvidedCross RecessedFlat End-Taptite
        Cena (bez DPH) od:
        0.08 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Tap-Tight B Type No. 0 Type 1 Pan-Head
        • SLEVA
        • Volume Discount

        SUNCO

        Tap-Tight B Type No. 0 Type 1 Pan-Head【2000 kusů】

        [Materials] Steel Stainless steel [Surface treatment] None, Trivalent chromate, Trivalent black, Trivalent white, Chromate plating, Chromate plating, Black chromate, Nickel plating, Nickel plating, Black nickel, Chrome plating, Black paint
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Pan Head1.2 ~ 23 ~ 8Stainless SteelBlack Painted / Not ProvidedCross RecessedFlat End-Taptite
        Cena (bez DPH) od:
        81.50 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Cross Recessed Flat Head Tapping Screw, Type 1 A Shape
        • SLEVA
        • Volume Discount

        SUNCO

        Cross Recessed Flat Head Tapping Screw, Type 1 A Shape【1 až 3000 kusů】

        It has a sharp point and has the coarsest pitch among types 1 to 3.
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Flat Head3 ~ 46 ~ 50Stainless SteelNot ProvidedCross RecessedCone PointStandardSelf Tapping Screws
        Cena (bez DPH) od:
        0.04 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • DIN 7981 Tapping screws
        • SLEVA
        • Volume Discount

        REYHER

        DIN 7981 Tapping screws

        Cross recessed tapping screws; Pan head tapping screws; Sheet metal screws; compare ISO 7049
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Pan Head2.2 ~ 6.34.5 ~ 120Stainless SteelNot ProvidedCross Recessed---
        Cena (bez DPH) od:
        0.03 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • ISO 7049 Tapping screws
        • SLEVA
        • Volume Discount

        REYHER

        ISO 7049 Tapping screws

        Cross recessed tapping screws; Pan head tapping screws; Sheet metal screws; compare DIN 7981
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Pan Head2.2 ~ 6.34.5 ~ 120Stainless SteelNot ProvidedCross Recessed---
        Cena (bez DPH) od:
        0.03 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Self Tapping Screws / Truss Head
        • SLEVA
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Self Tapping Screws / Truss Head

        The sizes are M3 to M5. Delivery from 1 pc is possible according to demand.
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Truss3 ~ 56 ~ 20Stainless SteelNot ProvidedCross RecessedCone PointStandardSelf Tapping Screws
        Cena (bez DPH) od:
        1.08 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Cross Recessed Pan Head Tapping Screw, Type 1, A Shape
        • SLEVA
        • Volume Discount

        SUNCO

        Cross Recessed Pan Head Tapping Screw, Type 1, A Shape【1 až 1000 kusů】

        Flat head screw with cross recess, self-tapping. SUNCO This product has the coarsest pitch among types 1 to 3.
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Pan Head3 ~ 56 ~ 50Stainless SteelNot ProvidedCross RecessedCone PointStandardSelf Tapping Screws
        Cena (bez DPH) od:
        0.03 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • ISO 14585 pan head tapping screw
        • Volume Discount

        REYHER

        ISO 14585 pan head tapping screw

        Pan head tapping screws; Sheet metal screws; TORX screws; srews with hexalobular internal driving
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Pan Head2.9 ~ 6.36.5 ~ 100Stainless SteelNot ProvidedHexalobular Socket---
        Cena (bez DPH) od:
        0.03 €
        Běžné datum odeslání:
        3 pracovních dnů
        Konfigurovat
      • DIN 7982 CSK-head tapping screw
        • Volume Discount

        REYHER

        DIN 7982 CSK-head tapping screw

        Countersunk head tapping screws; Cross recessed countersunk head screws; Cross recessed tapping screws; Sheet metal screws; compare ISO 7050
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Low Head2.2 ~ 6.36.5 ~ 100Stainless SteelNot ProvidedCross Recessed---
        Cena (bez DPH) od:
        0.03 €
        Běžné datum odeslání:
        3 pracovních dnů
        Konfigurovat
      • DIN 7976 Tapping screws
        • Volume Discount

        REYHER

        DIN 7976 Tapping screws

        Hexagon head tapping screws; Sheet metal screws; compare ISO 1479
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Truss2 ~ 89 ~ 70Stainless SteelNot ProvidedNot Provided---
        Cena (bez DPH) od:
        0.03 €
        Běžné datum odeslání:
        3 pracovních dnů
        Konfigurovat
      • ISO 14586 countersunk head tapping screw
        • SLEVA
        • Volume Discount

        REYHER

        ISO 14586 countersunk head tapping screw

        Countersunk head tapping screws; Sheet metal screws; TORX screws; srews with hexalobular internal driving
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Low HeadA 2 ~ 6.36.5 ~ 100Stainless SteelNot ProvidedHexalobular Socket---
        Cena (bez DPH) od:
        0.03 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Self Tapping Screws / Flat Head
        • Volume Discount

        MISUMI

        Self Tapping Screws / Flat Head

        The sizes are M3 to M5. Delivery from 1 pc. is possible as required.
        Více informací
        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
        Flat Head3 ~ 56 ~ 20Stainless SteelNot ProvidedCross RecessedCone PointStandardSelf Tapping Screws
        Cena (bez DPH) od:
        1.07 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Tap-Tight B Type No. 0 Type 1 Flat-Head

          SUNCO

          Tap-Tight B Type No. 0 Type 1 Flat-Head【2000 kusů】

          [Thread ridge type] Tap-Tight [Detailed shape] Disc [Mounting hole dimensions] Phillips [Basic shape] Standard (Round) [Tip shape] Flat End [Sales unit] Box/package [Nominal Thread (M)] 1.7 2 [Length L (mm)] 2.5 3 3.5 4 5 6 8 10 [Materials] Steel Stainless steel [Surface treatment] None, Trivalent chromate, Trivalent black, Trivalent white, Black chromate, Nickel plating, Chrome plating, Black paint
          Více informací
          Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
          Flat Head1.7 ~ 23 ~ 4Stainless SteelBlack Painted / Not ProvidedCross RecessedFlat End-Taptite
          Cena (bez DPH) od:
          83.24 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Cross Recessed Pan Head Tapping Screws, 2 Models Grooved B-1 Shape
          • SLEVA
          • Volume Discount

          SUNCO

          Cross Recessed Pan Head Tapping Screws, 2 Models Grooved B-1 Shape【1 až 3000 kusů】

          The tip is cut by 1/4, with the cut portion acting like a blade to trim the target material.
          Více informací
          Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
          Pan Head3 ~ 46 ~ 30Stainless SteelBlack Painted / Not Provided / DacrotizedCross RecessedOther Special ShapesStandardSelf Tapping Screws
          Cena (bez DPH) od:
          0.04 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Tap-Tight S Type Flat
          • SLEVA
          • Volume Discount

          SUNCO

          Tap-Tight S Type Flat

          [Materials] Steel Stainless steel SUS410 Stainless steel [Surface treatment]None, Non-chrome, Non-chrome (zinc plating) chromate color, Non-chrome (zinc plating) black, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating, Stainless steel coating, Stainless steel coating, Trivalent stainless steel coating, Tin cobalt
          Více informací
          Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
          Flat Head3 ~ 46 ~ 12Stainless SteelNot ProvidedCross RecessedOther Special ShapesStandardTaptite
          Cena (bez DPH) od:
          1.64 €
          Speciální cena
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Self Tapping Screws / Pan Head
          • Volume Discount

          MISUMI

          Self Tapping Screws / Pan Head

          The sizes are M3 to M5. Delivery from 1 piece is possible depending on requirements.
          Více informací
          Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
          Pan Head3 ~ 56 ~ 20Stainless SteelNot ProvidedCross RecessedCone PointStandardSelf Tapping Screws
          Cena (bez DPH) od:
          1.07 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • Cross Recessed Binding Head Tapping Screw, Type 1 A Shape
          • SLEVA
          • Volume Discount

          SUNCO

          Cross Recessed Binding Head Tapping Screw, Type 1 A Shape【1 až 2000 kusů】

          This product has the coarsest pitch among types 1 to 3. [Materials]stainless steel (EN 1.4006 Equiv.)
          Více informací
          Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
          Binding Head3 ~ 46 ~ 30Stainless SteelNot ProvidedCross RecessedOther Special ShapesStandardSelf Tapping Screws
          Cena (bez DPH) od:
          1.63 €
          Speciální cena
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Sheet metal screws / flat head / Phillips / Material selectable / Treatment selectable / CSP SLS
          • SLEVA
          • Volume Discount

          SUNCO

          Sheet metal screws / flat head / Phillips / Material selectable / Treatment selectable / CSP SLS【1 až 1000 kusů】

          It is characterised by its flatness in areas where countersinking is impossible due to the thin plate. Self-tapping screw with ultra-flat head, cross recess, standard (round).
          Více informací
          Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
          Ultra Low Head3 ~ 510 ~ 30Stainless SteelBlack Painted / Not ProvidedCross RecessedCone Point / Other Special ShapesStandardSelf Tapping Screws
          Cena (bez DPH) od:
          0.58 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Tap-Tight P Type Flat
          • SLEVA
          • Volume Discount

          SUNCO

          Tap-Tight P Type Flat【1 až 10000 kusů】

          [Materials] Steel Stainless steel [Surface treatment]None, Non-chrome, Non-chrome (zinc plating) chromate color, Non-chrome (zinc plating) black, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating, Stainless steel coating, Stainless steel coating, Trivalent stainless steel coating, CU plating, Black paint, Head coating (red)
          Více informací
          Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
          Flat Head2 ~ 45 ~ 20Stainless SteelBlack Painted / Not ProvidedCross RecessedFlat End-Taptite
          Cena (bez DPH) od:
          0.04 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Tap-Tight P Type Pan-Washer Head
          • SLEVA
          • Volume Discount

          SUNCO

          Tap-Tight P Type Pan-Washer Head【1 až 1250 kusů】

          [Materials] Steel Stainless steel [Surface treatment]None, Non-chrome, Non-chrome (zinc plating) chromate color, Non-chrome (zinc plating) black, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating, Stainless steel coating, Stainless steel coating, Trivalent stainless steel coating, Black paint, Head coating (white)
          Více informací
          Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
          Pan Head36 ~ 10Stainless SteelBlack Painted / White Paint / Not ProvidedCross RecessedFlat EndFlangedTaptite
          Cena (bez DPH) od:
          1.67 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Tap-Tight P Type No. 0 Type 1 Round-Head

            SUNCO

            Tap-Tight P Type No. 0 Type 1 Round-Head【2000 kusů】

            [Materials] Steel Stainless steel [Surface treatment] None, trivalent chromate, trivalent black, trivalent white, chromate plating, chromate plating, black chromate, nickel plating, chrome plating, black paint
            Více informací
            Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
            Pan Head1.7 ~ 2.63 ~ 7Stainless SteelBlack Painted / Not ProvidedCross RecessedOther Special ShapesStandard-
            Cena (bez DPH) od:
            81.45 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Truss Head Tapping Screw

              TRUSCO NAKAYAMA

              Truss Head Tapping Screw【12 kusů】

              [Features] ● This screw for use with thin steel plates features a head with a large outer diameter, and can be fastened just with a pilot hole—no tap or nut required. (B43 Type)  · Product is made of stainless steel, which is corrosion resistant. (B742 Type)  · Trivalent chromate product with less impact on the environment.
              Více informací
              Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
              Truss640Stainless SteelNot ProvidedCross RecessedCone Point-Self Tapping Screws
              Cena (bez DPH) od:
              9.68 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • TRF / Tamper-Proof Screw, Stainless Steel Pin with Hexagonal Hole, Small Plate Tapping Screw (4 Models, AB Type)
              • Volume Discount

              SUNCO

              TRF / Tamper-Proof Screw, Stainless Steel Pin with Hexagonal Hole, Small Plate Tapping Screw (4 Models, AB Type)【1 až 100 kusů】

              [Nominal M] 3.5, 4.2, 4.8[Material] Stainless Steel[Surface Processing] Bare / Black Coating
              Více informací
              Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
              Flat Head3.5 ~ 4.810 ~ 50Stainless SteelBlack Painted / Not ProvidedHex SocketCone PointStandardSelf Tapping Screws
              Cena (bez DPH) od:
              2.80 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • SUNCO Tight S Type Pot

                SUNCO

                SUNCO Tight S Type Pot【500 až 10000 kusů】

                [Nominal M] 2.3, 2.6, 3, 4, 5[Material] Steel · Stainless Steel[Surface Processing] Trivalent Stainless Coating, German Brown Plating, Black Paint
                Více informací
                Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                Pan Head2 ~ 54 ~ 20Stainless SteelCopper Plating / Black PaintedCross RecessedFlat EndStandardTaptite
                Cena (bez DPH) od:
                64.38 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • (+) Slim Head, B1 Tapping

                  SUNCO

                  (+) Slim Head, B1 Tapping【500 kusů】

                  [Nominal] 3, 4[Material] Steel, Stainless Steel[Surface Processing] Unichrome Plating, Bare
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  Ultra Low Head412Stainless SteelNot ProvidedHexalobular SocketFlat EndStandardSelf Tapping Screws
                  Cena (bez DPH) od:
                  91.67 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • ART 88176 Tapping scr. f. facing
                  • Volume Discount

                  REYHER

                  ART 88176 Tapping scr. f. facing

                  Sheet metal screws; Tapping screw for facing
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  Truss6.516 ~ 200Stainless SteelNot ProvidedNot Provided---
                  Cena (bez DPH) od:
                  0.39 €
                  Běžné datum odeslání:
                  3 pracovních dnů
                  Konfigurovat
                • ISO 7050 Tapping screws
                  • Volume Discount

                  REYHER

                  ISO 7050 Tapping screws

                  Countersunk head tapping screws; Cross recessed countersunk head screws; Cross recessed tapping screws; Sheet metal screws; compare DIN 7982
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  Low Head2.2 ~ 6.36.5 ~ 100Stainless SteelNot ProvidedCross Recessed---
                  Cena (bez DPH) od:
                  0.03 €
                  Běžné datum odeslání:
                  3 pracovních dnů
                  Konfigurovat
                • Cross Recessed Truss Tapping Screws, 2 Models Grooved B-1 Shape
                  • SLEVA
                  • Volume Discount

                  SUNCO

                  Cross Recessed Truss Tapping Screws, 2 Models Grooved B-1 Shape【1 až 2000 kusů】

                  The tip is cut by 1/4, the cut portion acting like a blade to trim the target material.
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  -3 ~ 46 ~ 40Stainless SteelBlack Painted / Not Provided / DacrotizedCross RecessedOther Special ShapesStandardSelf Tapping Screws
                  Cena (bez DPH) od:
                  0.06 €
                  Speciální cena
                  Běžné datum odeslání:
                  Skladová položka: 1 pracovní den
                  Některé položky lze dodat ve stejný den
                  Konfigurovat
                • Cross Recessed Truss Tapping Screw, Type 1 A Shape
                  • SLEVA
                  • Volume Discount

                  SUNCO

                  Cross Recessed Truss Tapping Screw, Type 1 A Shape【1 až 1000 kusů】

                  This product has the coarsest pitch among types 1 to 3. [Materials]Stainless steel (EN 1.4404 Equiv.)
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  -3 ~ 58 ~ 50Stainless SteelNot Provided / DacrotizedCross RecessedCone PointStandardSelf Tapping Screws
                  Cena (bez DPH) od:
                  0.15 €
                  Speciální cena
                  Běžné datum odeslání:
                  Skladová položka: 1 pracovní den
                  Některé položky lze dodat ve stejný den
                  Konfigurovat
                • Cross Recessed Flat Head Tapping Screws, 2 Models Grooved B-1 Shape
                  • SLEVA
                  • Volume Discount

                  SUNCO

                  Cross Recessed Flat Head Tapping Screws, 2 Models Grooved B-1 Shape【1 až 2000 kusů】

                  The tip is cut by 1/4, with the cut portion acting like a blade to trim the target material.
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  Flat Head3.5 ~ 48 ~ 40Stainless SteelSeizure-Against Coating / Not ProvidedCross RecessedFlat End / Other Special ShapesStandardSelf Tapping Screws
                  Cena (bez DPH) od:
                  0.06 €
                  Speciální cena
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Cross Recessed Hex Upset Tapping Screw, Type 2 Grooveless B-0 Shape
                  • Volume Discount

                  SUNCO

                  Cross Recessed Hex Upset Tapping Screw, Type 2 Grooveless B-0 Shape

                  Tapered down to the top 2.5 to 3 threads, providing a finer pitch than type 1.
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  -310Stainless SteelNot ProvidedCross RecessedOther Special Shapes-Self Tapping Screws
                  Cena (bez DPH) od:
                  1.77 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Type 2-BRP Phillips Pan Head Tapping Screw with Guide, G = 10
                  • Volume Discount

                  SUNCO

                  Type 2-BRP Phillips Pan Head Tapping Screw with Guide, G = 10【1 až 1000 kusů】

                  [Thread ridge type] Self-tapping Screws [Detailed shape] Pan [Mounting hole dimensions] Phillips [Basic shape] Standard (Round) [Materials] Stainless steel [Tip shape] Flanged Solid [Nominal Thread (M)] 3 4 4.5 6 [Length L (mm)] 20 25 30 35 40 45 50 55 70 75 [Surface treatment] None, German brown plating, black paint [Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  Pan Head3 ~ 620 ~ 75Stainless SteelCopper Plating / Black Painted / Not ProvidedCross RecessedDog Point-Self Tapping Screws
                  Cena (bez DPH) od:
                  1.67 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Type 1-A TRX Tamper-Proof Pan Head Tapping Screw
                  • SLEVA
                  • Volume Discount

                  SUNCO

                  Type 1-A TRX Tamper-Proof Pan Head Tapping Screw【1 až 2000 kusů】

                  [Materials] Steel Stainless steel [Surface treatment]None, None, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, German-brown plating, Black paint, Head coating (black), Black paint, Temper color, Temper color, Temper color (thick)
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  Pan Head3 ~ 46 ~ 50Stainless SteelCopper Plating / Black Painted / Tempered Collar / Not ProvidedHexalobular SocketCone PointStandardSelf Tapping Screws
                  Cena (bez DPH) od:
                  0.10 €
                  Speciální cena
                  Běžné datum odeslání:
                  Skladová položka: 1 pracovní den
                  Některé položky lze dodat ve stejný den
                  Konfigurovat
                • Type 1A TRX Tamper-Proof Truss Tapping Screw
                  • SLEVA
                  • Volume Discount

                  SUNCO

                  Type 1A TRX Tamper-Proof Truss Tapping Screw【1 až 1000 kusů】

                  [Thread ridge type] Self Tapping Screws [Nominal Thread (M)] 4 [Detailed shape] Truss [Mounting hole dimensions] Hexalobular socket [Basic shape] Standard (Round) [Materials] Stainless steel [Tip shape] Cone Point [Additional shapes] Standard [Application] Standard [Length L (mm)] 8 10 12 16 20 25 30 [Surface treatment] None, Black paint [Sales unit] Low Quantity (Available for Purchase from 1pc) Box and Pkg.
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  -48 ~ 30Stainless SteelBlack Painted / Not ProvidedHexalobular SocketCone PointStandardSelf Tapping Screws
                  Cena (bez DPH) od:
                  0.16 €
                  Speciální cena
                  Běžné datum odeslání:
                  Skladová položka: 1 pracovní den
                  Některé položky lze dodat ve stejný den
                  Konfigurovat
                • Tap-Tight B Type Flat
                  • SLEVA
                  • Volume Discount

                  SUNCO

                  Tap-Tight B Type Flat【1 až 3000 kusů】

                  [Materials] Steel Stainless steel [Surface treatment] None, non-chrome, non-chrome (zinc plating) chromate color, non-chrome (zinc plating) black, non-chrome black, trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, nickel plating, black nickel, chrome plating, stainless steel coating, stainless steel coating, trivalent stainless steel coating, black paint
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  Flat Head2.6 ~ 46 ~ 10Stainless SteelBlack Painted / Not ProvidedCross RecessedOther Special ShapesStandardTaptite
                  Cena (bez DPH) od:
                  0.03 €
                  Speciální cena
                  Běžné datum odeslání:
                  Skladová položka: 1 pracovní den
                  Některé položky lze dodat ve stejný den
                  Konfigurovat
                • Tap-Tight B Type Pan-Washer Head
                  • Volume Discount

                  SUNCO

                  Tap-Tight B Type Pan-Washer Head【1 až 1250 kusů】

                  [Materials] Steel Stainless steel [Surface treatment] None, non-chrome, non-chrome (zinc plating) chromate color, non-chrome (zinc plating) black, non-chrome black, trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, chrome plating, stainless steel coating, stainless steel coating, trivalent stainless steel coating
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  Pan Head310 ~ 12Stainless SteelNot ProvidedCross RecessedOther Special ShapesFlangedTaptite
                  Cena (bez DPH) od:
                  1.66 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Tap-Tight P Type Binding
                  • SLEVA
                  • Volume Discount

                  SUNCO

                  Tap-Tight P Type Binding【1 až 8000 kusů】

                  [Materials] Steel Stainless steel [Surface treatment] None, non-chrome, non-chrome (zinc plating) chromate color, non-chrome (zinc plating) black, non-chrome black, trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, nickel plating, black nickel, chrome plating, stainless steel coating, stainless steel coating, trivalent stainless steel coating, CU plating, black paint
                  Více informací
                  Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                  Binding Head2 ~ 44 ~ 20Stainless SteelBlack Painted / Not ProvidedCross RecessedFlat End-Taptite
                  Cena (bez DPH) od:
                  0.03 €
                  Speciální cena
                  Běžné datum odeslání:
                  Skladová položka: 1 pracovní den
                  Některé položky lze dodat ve stejný den
                  Konfigurovat
                • Tap-Tight B Type No. 0 Type 3 Round-Head

                    SUNCO

                    Tap-Tight B Type No. 0 Type 3 Round-Head【2000 kusů】

                    [Materials] Steel Stainless steel [Surface treatment] None, trivalent chromate, trivalent black, trivalent white, chromate plating, chromate plating, black chromate, nickel plating, chrome plating, black paint
                    Více informací
                    Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                    Pan Head1.4 ~ 23 ~ 8Stainless SteelBlack Painted / Not ProvidedCross RecessedFlat End-Taptite
                    Cena (bez DPH) od:
                    81.67 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Tap-Tight P Type No. 0 Type 1 Flat-Head

                      SUNCO

                      Tap-Tight P Type No. 0 Type 1 Flat-Head【2000 kusů】

                      [Materials] Steel Stainless steel [Surface treatment] None, Trivalent chromate, Trivalent black, Trivalent white, Black chromate, Nickel plating, Chrome plating, Black paint, Trivalent white + Head coating (white)
                      Více informací
                      Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                      Flat Head1.73 ~ 5Stainless SteelBlack Painted / Not ProvidedCross RecessedOther Special ShapesStandard-
                      Cena (bez DPH) od:
                      82.98 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Tap-Tight, No. 0, Type 3, Pan-Head, P Type
                      • SLEVA
                      • Volume Discount

                      SUNCO

                      Tap-Tight, No. 0, Type 3, Pan-Head, P Type【2000 kusů】

                      [Materials] Steel, Stainless steel [Surface treatment] None, trivalent chromate, trivalent black, trivalent white, chromate plating, chromate plating, black chromate, nickel plating, chrome plating, black paint.
                      Více informací
                      Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                      Pan Head1.7 ~ 23 ~ 7Stainless SteelBlack Painted / Not ProvidedCross RecessedOther Special ShapesStandard-
                      Cena (bez DPH) od:
                      82.49 €
                      Speciální cena
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Pan Head Tapping Screw
                      • SLEVA

                      TRUSCO NAKAYAMA

                      Pan Head Tapping Screw【13 až 140 kusů】

                      [Features] ● This screw for use with thin steel plates can be fastened just with a pilot hole—no tap or nut required. (B707 Type)  · Trivalent chromate product with less impact on the environment.
                      Více informací
                      Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                      Pan Head3 ~ 612 ~ 50Stainless SteelNot ProvidedCross RecessedCone Point-Self Tapping Screws
                      Cena (bez DPH) od:
                      8.57 €
                      Speciální cena
                      Běžné datum odeslání:
                      Skladová položka: 1 pracovní den
                      Některé položky lze dodat ve stejný den
                      Konfigurovat
                    • SUNCO Tight P Type Pot

                        SUNCO

                        SUNCO Tight P Type Pot【800 až 3000 kusů】

                        [Nominal M] 2.5, 3, 3.5, 4, 5, 6[Material] Steel · SUS410 · Stainless Steel[Surface Processing] None / Non-Chrome (Galvanized) Chromate Color / Non-Chrome (Galvanized) Black / Non-Chrome Black / Trivalent Black / Trivalent White / Unichrome Plating / Chromate Plating / Nickel Plating / Black Nickel / Chrome Plating / Trivalent Stainless Coat / Tin Cobalt / Black Painted / Other Special Treatment (ZEC Coat - Base Trivalent White)
                        Více informací
                        Detailed ShapeScrew Nominal (M)Length L (mm)MaterialSurface TreatmentMounting Hole ShapeTip ShapeAdditional ShapeThread Type
                        Pan Head2.5 ~ 410 ~ 14Stainless SteelBlack Painted / Not ProvidedCross RecessedFlat EndStandardTaptite
                        Cena (bez DPH) od:
                        48.43 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat