Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Screw Nominal (M)
  • Material
  • Surface Treatment
  • Výrobce

Hex Nuts (Screw Nominal (M): M 30)

    • Hexagon Nuts, Metrical Thread, with Polyamide Insert, Self-locking - Nuts DIN 985 (Similar DIN EN ISO 10511), Thin Version, Steel, Zinc-plated
      • Volume Discount

      MAEDLER

      Hexagon Nuts, Metrical Thread, with Polyamide Insert, Self-locking - Nuts DIN 985 (Similar DIN EN ISO 10511), Thin Version, Steel, Zinc-plated

      Self-locking hexagon nuts, according to the old standard DIN 985, with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats or height). But the nut DIN 985 is still used very often. Note: Nuts from steel or stainless steel tend to stick (seizure) on threaded bars from steel or stainless steel. They must be well lubricated and are movable only for short time at low speed.Material: Steel, property class 8, zinc-plated. Steel, property class 10, zinc-plated.
      Více informací
      Environmentally FriendlyScrew Nominal (M)Properties / applicationsMaterialSurface TreatmentThread TypeMaterial DetailsApplications, FunctionsSales Unit
      -M 30-SteelZinc Plating----
      Cena (bez DPH) od:
      8.36 €
      Běžné datum odeslání:
      4 pracovních dnů
      Konfigurovat
    • Hexagon Nuts, Metrical Thread, with Polyamide Insert, Self-locking - Nuts DIN 985 (Similar DIN EN ISO 10511), Thin Version, Stainless Steel
      • Volume Discount

      MAEDLER

      Hexagon Nuts, Metrical Thread, with Polyamide Insert, Self-locking - Nuts DIN 985 (Similar DIN EN ISO 10511), Thin Version, Stainless Steel

      Self-locking hexagon nuts, according to the old standard DIN 985, with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats or height). But the nut DIN 985 is still used very often. Note: Nuts from steel or stainless steel tend to stick (seizure) on threaded bars from steel or stainless steel. They must be well lubricated and are movable only for short time at low speed.Material: Stainless steel V2A (A2). Stainless steel V4A (A4).
      Více informací
      Environmentally FriendlyScrew Nominal (M)Properties / applicationsMaterialSurface TreatmentThread TypeMaterial DetailsApplications, FunctionsSales Unit
      -M 30-Stainless SteelNot Provided----
      Cena (bez DPH) od:
      10.94 €
      Běžné datum odeslání:
      4 pracovních dnů
      Konfigurovat