Insert

?* Information on days to ship and prices

• 

  Self-Tapping Inserts / Slotted

  MISUMI

  It is a split groove threaded insert, threaded on both the inner and outer diameters.
  Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Insert Nitronics 60

  RECOIL

  Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.80 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  A general-purpose well-balanced screw insert with low cost.
  [Features]
  ・ At the time of press-fit, the product has direction.
  ・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thread Inserts

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  These inserts are the best choice for easy and secure fitment into plastic holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.24 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat, Slotted Type 302

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting slot (K0978)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: With cutting slot
  ・Material: Stainless steel, Steel
  ・Surface finish body: Bright, galvanised
  ・D1=Internal thread: M3-M16
  
  [Features]
  ・For making high-strength screw connections in materials with low shear strength
  ・Guarantees secure and firm anchoring in the host material
  ・Ideal for difficult-to-machine materials
  ・Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  General purpose type. Low cost and well balanced.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.29 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tangless Inserts Installation / Removal Tools

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	164.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type / IRU

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Brass Bit Insert (Flanged) / HFB

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.6/3/4/5
  [Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Serrated locking plates, Stainless Steel

  GANTER

  With the aid of Stainless Steel-Serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
  The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
  The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded Inserts (K0398)

  KIPP

  [Specifications]
  ・Version 1: Standard
  ・Material: Steel, Stainless steel
  ・Core drill φ(mm): 6.9-14.8
  ・D1=Internal thread: M5-M12x1.25
  
  [Features]
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tangless Insert Insertion Tool

  ACCURATE

  A tangless insert metric coarse insertion tool.

  Select to compare

  Configure now
  Starting from∗ ：	116.01 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Techlock (SL)【1-5,000 Pieces Per Package】

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
  [L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
  [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.23 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts reinforced (K0399)

  KIPP

  [Specifications]
  ・Version 1: Reinforced
  ・Material: Steel, Stainless steel
  ・Core drill φ(mm): 6.9-31
  ・D1=Internal thread: M4-M24x2
  
  [Features]
  ・Stronger cross section for inserts with an increased load
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Thread Inserts / Tangless

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Recoil-Free (mm) SUS304【1-3 Pieces Per Package】

  RECOIL

  Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.74 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Type 308, 3-Hole / Long Size

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.12 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DIN 7965 Screwed inserts

  REYHER

  RAMPA couplings; Screwed inserts; Slotted nuts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting bores (K0979)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: With cutting bore
  ・Material: Stainless steel, Steel
  ・D1=Internal thread: M3-M12
  
  [Features]
  ・For making high-strength screw connections in materials with low shear strength
  ・Guarantees secure and firm anchoring in the host material
  ・Ideal for difficult-to-machine materials
  ・Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat, Ultra Coarse Outside Screw, Type 309

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Serrated locking plates, Sintered Steel

  GANTER

  With the aid of serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
  The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
  The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Insert bushings

  GANTER

  Drive the Stainless Steel-Insert bushings GN 992.5 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
  The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.22 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Heat Lock (Type HL)【1-1,000 Pieces Per Package】

  JAPAN DRIVE-IT

  · Type: Press fit use
  · Application: Resin, general
  · Material: Brass
  · Thread ridge type: Metric coarse screw, without notch
  · Shape: Standard
  · Diameter (following insertion): M3, M3.5, M4, M5, M6
  · Length following insertion (D = screw diameter M): 1.5D, 2D
  · Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tangless Insert Metric Coarse Phosphor Bronze

  ACCURATE

  We recommend using this on anti-magnetic works or locations.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.64 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Threaded inserts reinforced (07661)

  NORELEM

  · Stronger cross section for inserts with an increased load
  
  · Enables tapped holes which have been damaged to be used again or repaired
  
  · Suitable for use in various materials
  
  · Quick and easy installation
  
  · No other special tools are needed besides the assembly tool

  Select to compare

  Configure now
  Starting from∗ ：	4.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Thread Insert (Box)【100 Pieces Per Package】

  MISUMI

  For your own stock or for a large number of uses, buying per box is beneficial.

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat Three-Hole / Short 307 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.00 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Threaded insert steel self-tapping type B (K1538)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: with cutting bore
  ・Material: Steel
  ・Surface finish body: Galvanised
  ・D1=Internal thread: M8
  
  [Features]
  ・Compatible with Bosch profile
  ・Standard thread M8
  ・Easy to install

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.38 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded inserts (07660)

  NORELEM

  · Enables tapped holes which have been damaged to be used again or repaired
  
  · Suitable for use in various materials
  
  · Quick and easy installation
  
  · No other special tools are needed besides the assembly tool

  Select to compare

  Configure now
  Starting from∗ ：	4.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Brass Insert Nut (Screw-In Type) IRB / IRB-C

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Serrated locking plates, for welding (GN 188)

  GANTER

  With the aid of Stainless Steel-Serrated locking plates GN 188, standard components can be interlocked and firmly attached in defined angular increments. They are joined by welding.The toothing is positioned exactly on the alignment holes d4, which guarantees a parallel or right-angled arrangement.The thrust spring is placed between the toothed discs during assembly and ensures that the toothed discs separate properly when loosening. The scope of delivery includes two serrated locking plates, one thrust spring and, depending on the version, a threaded bushing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Thread Insert Removal Tool

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flat Head Sonic Lock (Type SHK)

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.34 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting slot (07652)

  NORELEM

  · For making high-strength screw connections in materials with low shear strength
  
  · Guarantees secure and firm anchoring in the host material
  
  · Ideal for difficult-to-machine materials
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	0.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taps for Thread Inserts

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  C-Lock (HCL Type)【10-100 Pieces Per Package】

  BOHSEI

  Flange shape enables screws to be tightened without damaging plastics. Also prevents plastic burrs from forming when inserts are pressed in.

  Select to compare

  Configure now
  Starting from∗ ：	4.15 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Insert Phosphor Bronze

  RECOIL

  Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.18 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tool for Inserts Machine Processing 620-Type

  KKV

  A tool for machine processing inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6 size / internal screw d1 (mm) 2.5 3 3.5 4 5 6

  Select to compare

  Configure now
  Starting from∗ ：	157.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tangless Insert Metric Extraction Tool (for Locking)

  ACCURATE

  A dedicated locking-type extraction tool.

  Select to compare

  Configure now
  Starting from∗ ：	158.63 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Tangless Insert Repair Kit

  ACCURATE

  All-in-One Tool and Ball Used For Work Including Pilot Hole Work and Insertion

  Select to compare

  Configure now
  Starting from∗ ：	139.07 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ART 88331 AMECOIL-Thread inserts

  REYHER

  AMECOIL inserts; AMECOIL-inserts; Nuts with fine thread

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting bores (07653)

  NORELEM

  · For making high-strength screw connections in materials with low shear strength
  
  · Guarantees secure and firm anchoring in the host material
  
  · Ideal for difficult-to-machine materials
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	0.61 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...