Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Type
  • Screw Dia. M (after insertion)(mm)
  • Thread Dia. (After inserted), Unified(inch)
  • CAD
  • Thread Inserts - Tangless

      • Tangless Insert
        • SLEVA
        • Volume Discount

        RECOIL

        Tangless Insert

        The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        TanglessLight MetalStainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread2.5 ~ 12-1D / 1.5D / 2DNot Provided-
        Cena (bez DPH) od:
        0.50 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Tangless Insert Metric Coarse Phosphor Bronze
        • Volume Discount

        ACCURATE

        Tangless Insert Metric Coarse Phosphor Bronze

        We recommend using this on anti-magnetic works or locations.
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        TanglessLight Metal / Cast Iron / Resin GeneralPhosphor BronzeMetric (Coarse) Thread3 ~ 6-1D / 1.5D / 2D--
        Cena (bez DPH) od:
        0.58 €
        Běžné datum odeslání:
        10 pracovních dnů
        Konfigurovat
      • Tangless Insert Metric Coarse
        • SLEVA
        • Volume Discount

        ACCURATE

        Tangless Insert Metric Coarse

        An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        TanglessLight Metal / Cast Iron / Resin GeneralStainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread / Metric (Fine) Thread2 ~ 24-1D / 1.5D / 2DNot Provided-
        Cena (bez DPH) od:
        0.51 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Stainless Steel-Serrated locking plates, for welding (GN 188)
        • Volume Discount

        GANTER

        Stainless Steel-Serrated locking plates, for welding (GN 188)

        With the aid of Stainless Steel-Serrated locking plates GN 188, standard components can be interlocked and firmly attached in defined angular increments. They are joined by welding.The toothing is positioned exactly on the alignment holes d4, which guarantees a parallel or right-angled arrangement.The thrust spring is placed between the toothed discs during assembly and ensures that the toothed discs separate properly when loosening. The scope of delivery includes two serrated locking plates, one thrust spring and, depending on the version, a threaded bushing.
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        --Stainless Steel------
        Cena (bez DPH) od:
        12.36 €
        Běžné datum odeslání:
        7 pracovních dnů
        Konfigurovat
      • Serrated locking plates, Stainless Steel
        • SLEVA
        • Volume Discount

        GANTER

        Serrated locking plates, Stainless Steel

        With the aid of Stainless Steel-Serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        --Stainless Steel------
        Cena (bez DPH) od:
        11.38 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Thread Inserts / Tangless
        • SLEVA
        • Volume Discount

        MISUMI

        Thread Inserts / Tangless

        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        TanglessLight MetalStainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread2.5 ~ 10-1D / 1.5D / 2DNot Provided-
        Cena (bez DPH) od:
        1.90 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Tangless Insert Metric Coarse Locking
        • SLEVA
        • Volume Discount

        ACCURATE

        Tangless Insert Metric Coarse Locking

        A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        TanglessLight Metal / Cast Iron / Resin GeneralStainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread2.5 ~ 12-1D / 1.5D / 2D--
        Cena (bez DPH) od:
        0.71 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Stainless Steel Tangless Insert
        • SLEVA
        • Volume Discount

        SUNCO

        Stainless Steel Tangless Insert

        [Nominal M] 2, 2.5, 2.6, 3, 4, 5, 6, , 8, 10, 12, 16, 20[Material] Stainless Steel[Surface Processing] Bare
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        Tangless-Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread2 ~ 20-1D / 1.5D / 2DProvidedStandard
        Cena (bez DPH) od:
        0.72 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Thrust springs, Stainless Steel
        • SLEVA
        • Volume Discount

        GANTER

        Thrust springs, Stainless Steel

        Thrust springs, Stainless Steel
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        ---------
        Cena (bez DPH) od:
        0.56 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Thread Insert (Box)
        • Stock

        MISUMI

        Thread Insert (Box)【100 kusů】

        For own stockpiling or for a large number of uses, buying per carton is advantageous.
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        TanglessLight MetalStainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread2.5 ~ 8-1D / 1.5D / 2DNot Provided-
        Cena (bez DPH) od:
        63.26 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Tangless Insert Unified Coarse
        • Volume Discount

        ACCURATE

        Tangless Insert Unified Coarse

        Unified size tangless insert that reduces the number of work steps and greatly reduces working cost compared to inserts with a tang.
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        TanglessLight Metal / Cast Iron / Resin GeneralStainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Unified (Coarse) Thread-1/4 ~ 101D / 1.5D / 2D--
        Cena (bez DPH) od:
        0.86 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Serrated locking plates, Sintered Steel
        • SLEVA
        • Volume Discount

        GANTER

        Serrated locking plates, Sintered Steel

        With the aid of serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.
        Více informací
        TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
        --Steel------
        Cena (bez DPH) od:
        8.52 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Tangless Insert Repair Kit

          ACCURATE

          Tangless Insert Repair Kit

          All-in-One Tool and Ball Used For Work Including Pilot Hole Work and Insertion
          Více informací
          TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
          Tangless--Metric (Coarse) Thread--1.5D--
          Cena (bez DPH) od:
          122.96 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Screw Reinforcement Tangless Insert
          • SLEVA

          KS SANGYO

          Screw Reinforcement Tangless Insert【10 až 20 kusů】

          Tangless insert screw.[Features]· This tangless insert drastically cuts down on work procedures and time, which increases work efficiency, making it possible to reduce costs.· Insert work, which took 56 seconds in the past, was drastically shortened to 7 seconds by using a dedicated power tool.· Tangless design means no tangs to break off and no concerns for missing pitches or damaging the base material.[Applications]· For reinforcement of materials such as aluminum and plastic where female threads have low strength.· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.· Repairs and reforms broken, worn out, and crushed female threads.
          Více informací
          TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
          TanglessLight Metal / Cast Iron / Resin GeneralStainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread2 ~ 12-1D / 1.5D / 2DProvidedStandard
          Cena (bez DPH) od:
          14.81 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Locking joint sets locking plates GN
          • Volume Discount

          GANTER

          Locking joint sets locking plates GN

          [Specifications]・Product type: Locking joint sets[Features]・Locking joint sets GN 187.6 can be used to combine stainless steellocking heads GN 187.5 to form locking joints・Thanks to the hexagonal shoulder, which creates a form-locking connection that prevents the part from also turning, the centering bushing allows fast and easy mounting・In the unlocked state, the bushing or draw nut forms the axis that positions the locking heads center to center・The use of stainless steel pressure springs GN 187.2 allows the locking heads to be cleanly separated from each other. The types E and K are used in applications requiring frequent and tool-free adjustment of the locking joints
          Více informací
          TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
          ---------
          Cena (bez DPH) od:
          4.16 €
          Běžné datum odeslání:
          7 pracovních dnů
          Konfigurovat
        • Stainless Steel-Locking plates
          • Volume Discount

          GANTER

          Stainless Steel-Locking plates

          [Specifications]・Product type: Stainless Steel-Locking plates・Material: NI. Stainless Steel precision casting[Features]・Stainless steel locking plates GN 187.5 can be installed in combination with locking joint sets GN 187.6 to create locking joints・This allows gear lever handles and retaining tubes or trays and mounts to be adjusted relative to each other at defined angles with a form-locking connection・The angle orientation of the teeth is adapted to the connecting elements, permitting an axis-parallel or right-angled arrangement
          Více informací
          TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
          ---------
          Cena (bez DPH) od:
          14.14 €
          Běžné datum odeslání:
          7 pracovních dnů
          Konfigurovat
        • Tangless Insert Metric Coarse Taping Packaging
          • Volume Discount

          ACCURATE

          Tangless Insert Metric Coarse Taping Packaging

          We prevent incorrect quantities by shipping using tape and packaging. Aims to improve efficiency through using electric tools in combination.
          Více informací
          TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
          TanglessLight Metal / Cast Iron / Resin GeneralStainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Metric (Coarse) Thread2.5 ~ 5-1D / 1.5D / 2D--
          Cena (bez DPH) od:
          0.95 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Tangless Insert Unified Fine
          • SLEVA
          • Volume Discount

          ACCURATE

          Tangless Insert Unified Fine

          Unified size tangless insert that reduces the number of work steps and greatly reduces working cost compared to inserts with a tang.
          Více informací
          TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
          TanglessLight Metal / Cast Iron / Resin GeneralStainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)Unified (Fine) Thread-1/4 ~ 101D--
          Cena (bez DPH) od:
          0.72 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Guide pots, Stainless Steel
          • Volume Discount

          GANTER

          Guide pots, Stainless Steel

          [Specifications]・Product type: Guide pots・Materials: Stainless Steel AISI 303・Inner diameter d1: 22-40[Features]・Accessories for serrated locking plates
          Více informací
          TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
          --Stainless Steel------
          Cena (bez DPH) od:
          10.02 €
          Běžné datum odeslání:
          7 pracovních dnů
          Konfigurovat
        • Guide pots, Steel
          • SLEVA
          • Volume Discount

          GANTER

          Guide pots, Steel

          [Specifications]・Product type: Guide pots・Materials: Steel: blackened・Inner diameter d1: 22-40[Features]・Accessories for serrated locking plates
          Více informací
          TypeApplicationMaterialScrew TypeScrew Dia. M (after insertion)(mm)Thread Dia. (After inserted), Unified(inch)Length L (after insertion) (D = Thread Dia. M)NotchShape
          --Steel------
          Cena (bez DPH) od:
          9.58 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          K dispozici odeslání ve stejný den
          Konfigurovat