Drill Bits（work material：High Hardness Steel）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Holder 3 x D HT800WP 4107

GUHRING

[Features]
· Enables stable machining with the reliable clamping method and highly rigid body.
· Internal oil supply type.

Select to compare

Configure now
Starting from^∗ ：	329.56 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Super U Drill - Cylindrical Shank

SANDVIK

With an indexable drill, balanced cutting and table feed up to twice as high are possible through stepped biting at the entrance, improving the precision of the processed hole.

Select to compare

Configure now
Starting from^∗ ：	618.32 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroDrill 460 Solid Carbide Step and Chamfer Drill

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Aqua Drill EX Flat AQDEXZ

NACHI(FUJIKOSHI)

Countersinking drill with good drilling performance. Well suited for slanted surfaces and pilot drilling for tapping.

Select to compare

Configure now
Starting from^∗ ：	88.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Micro Drill, for Stainless Steel

ATOM

Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.

Select to compare

Configure now
Starting from^∗ ：	39.15 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Aqua Drill EX Flat Long Shank AQDEXZLS

NACHI(FUJIKOSHI)

Flat drill with a lower neck length of 10D and good hole drilling performance.

Select to compare

Configure now
Starting from^∗ ：	106.97 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroDrill 880 Insert for Drilling

SANDVIK

[Specifications]
・Insert clearance angle: n/s
・Grade type: Hard metal
・eClass-5.1: 21011901

[Features]
・Wiper geometry for best surface finish or higher feed possibilities
・Optimized chip channels for accelerated chip evacuation
・Easy identification thanks to laser marking with drill, insert, and screw codes on the drill shank
・Two or four cutting edges depending on drill diameter
・Optimized geometries assure high performance in most materials
・Optimized grades assure longer insert tool life

Select to compare

Configure now
Min. Shipping Days ：	5 Days

MSDH Drill for Small Diameter High-Hardness Processing

NS TOOL

Allows drilling into 65 HCR quenched steel with small diameter drills. Achieves low variation in hole diameter and stable long product life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	60.22 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Micro Drill "NEO PRO" Standard Blade Length

ATOM

A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.68 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SANDVIK CoroDrill 880 Indexable Insert Drill

SANDVIK

[Specifications]
・Drill type: Indexable insert drill
・eClass-5.1: 21010103

[Features]
・Wiper geometry for best surface finish or higher feed possibilities
・Optimized chip channels for accelerated chip evacuation
・Easy identification thanks to laser marking with drill, insert, and screw codes on the drill shank
・Two or four cutting edges depending on drill diameter
・Optimized geometries assure high performance in most materials
・Optimized grades assure longer insert tool life

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK CoroDrill 460 Solid Carbide Drill

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Promotional pricing

Aqua Drill Hard AQDH

NACHI(FUJIKOSHI)

Highly efficient processing of 50-68 HRC tempered steel is possible.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.77 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Aqua Micro Drill AQMD

NACHI(FUJIKOSHI)

Capable of stable drilling of small diameter holes. Well suited for machining of materials ranging from green timber to high hardness steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.65 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

For Broken Tap Removal EX-H-DRL

OSG

Used for removing broken taps, drilling of hardened steel (58 ~ 68HRC), stellite, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	41.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Powder HSS for Tool Steel Stub Type VPH-GDS

OSG

Exhibits High Cost Performance for 40-50 HRC Heat-Treated Steel Processing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.37 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)

OSG

Suitable for steel materials and NI-based alloys up to 55 HRC. Achieves Long Life Processing with Oil Hole Specifications

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	159.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Toglon Hard Drill Regular ALT Coating

IWATA TOOL

· 3-flute blade design gives a finish with outstanding hole diameter accuracy and hole surface roughness.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	89.60 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Toglon Hard Long Drill 20D ALT Coating

IWATA TOOL

[Features]
· Realizes through-holes of 20D or more in quenched steel.
· H7 or greater accuracy is possible due to the extremely high circularity and cylindricity and excellent surface roughness.
· Can also machine mold ejector pin holes, etc., in one go without a pilot hole.
· Reduced processes can help to shorten lead time.

Select to compare

Configure now
Starting from^∗ ：	101.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Standard Solid Drill with Coating

ATOM

ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.28 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

End Mill Shank Type 3 x D RT100U 5514

GUHRING

[Features]
· Supports a wide range of machining and enables high-efficiency, high-speed machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	93.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill Shank Drill 5 × D with Oil Hole RT100U 5511

GUHRING

[Features]
· Internal lubrication enables high performance drilling without steps.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	116.22 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

GUHRING

Internal lubrication enables high performance drilling without steps.

Select to compare

Configure now
Starting from^∗ ：	168.40 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Holder 5 x D HT800WP 4108

GUHRING

[Features]
· Enables stable machining with the reliable clamping method and highly rigid body.
· Unique groove shape and coolant duct position provide excellent chip discharge properties.
· Internal oil supply type.

Select to compare

Configure now
Starting from^∗ ：	396.51 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Super U Drill - Hole Drilling Tip

SANDVIK

Ideal for machining requiring deep cutting and a highly rigid tip

Select to compare

Configure now
Starting from^∗ ：	38.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Aqua Drill EX with Flat Corner R AQDEXZ-R

NACHI(FUJIKOSHI)

Select to compare

Configure now
Starting from^∗ ：	102.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroDrill 880 Drill Body for Cassettes

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	1,287.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroDrill 881 Indexable Insert Drill

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub

MISUMI

[Features]
-Weak helix and large core diameter improve tool rigidity
-Achieves excellent strength by using a straight cutting edge
-Cutting edge chipping is suppressed by corner radius machining, and cracks at the bottom of blind holes in workpieces are also suppressed
-Ideal for machining high hardness steel from HRC40 to 60
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	62.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular

MISUMI

[Features]
-Weak helix angle and high core diameter improve the rigidity of the tool
-Achieves excellent strength by using a straight cutting edge
-Ideal for machining high hardness steels from HRC40 to 60
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	58.66 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular

MISUMI

[Features]
-Weak spiral angle and high core diameter improve tool rigidity
-Achieves excellent strength by using a straight cutting edge
-Ideal for machining high hardness steels from HRC40 to 60
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	55.64 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular

MISUMI

A small radius type of the high-hardness steel series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.70 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Aqua Drill 3-Flute AQD3F

NACHI(FUJIKOSHI)

Adopts three blade with excellent cutting balance. Adopt three blade with excellent cutting balance.

Select to compare

Configure now
Starting from^∗ ：	38.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Aqua Drill EX Oil Hole 5D AQDEXOH5D

NACHI(FUJIKOSHI)

Stable wet machining, can be MQL machining. For high efficiency drilling up to 5 times the drill diameter.

Select to compare

Configure now
Starting from^∗ ：	120.87 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Aqua Drill Regular AQDR

NACHI(FUJIKOSHI)

Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Aqua Drill EX Regular AQDEXR

NACHI(FUJIKOSHI)

Super general-use drill capable of stable high efficiency machining in a range from medium low speed to high speed applications.

Select to compare

Configure now
Starting from^∗ ：	113.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Aqua Drill EX Stub AQDEXS

NACHI(FUJIKOSHI)

Super general-use drill capable of stable high efficiency machining in a range from medium low speed to high speed applications.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Aqua Drill EX Oil Hole 3D AQDEXOH3D

NACHI(FUJIKOSHI)

Stable wet machining, can be MQL machining. For high efficiency drilling up to 3 times the drill diameter.

Select to compare

Configure now
Starting from^∗ ：	120.16 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Aqua Drill EX Oil Hole 8D AQDEXOH8D

NACHI(FUJIKOSHI)

Stable wet machining, can be MQL machining. For high efficiency drilling up to 8 times the drill diameter.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	127.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Aqua Drill Stub AQDS

NACHI(FUJIKOSHI)

Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.

Select to compare

Configure now
Starting from^∗ ：	53.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Extra Long Type Carbide with Oil Hole for High Hardness Mold Materials FTO-H-GDXL

OSG

Achieves a stable and long tool life and high efficiency in 20D ultra-deep hole machining of high hardness mold material (45 ~ 55HRC)

Select to compare

Configure now
Starting from^∗ ：	227.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3 Flute Long Neck Type Carbide for High Hardness Steel FHL-GDTS

OSG

The processing of ultra-deep hole of 10d ~ 20D in hardened steel, which could not be achieved only by electrical discharge machining, is now possible with high accuracy, while significant reduction in the total drilling time is achieved.

Select to compare

Configure now
Starting from^∗ ：	67.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Stub Type for High Hardness Steel FH-GDS

OSG

Developed For Crafting Small Diameter Holes in Hardened Steel And is Suited For High Precision / Long Life Crafting of Shallow (Approx. 3D) Holes.

Select to compare

Configure now
Starting from^∗ ：	52.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Medium Type Carbide for High Hardness Steel FH-GDN

OSG

Developed For Crafting Small Diameter Holes in Hardened Steel And Shows its Best Performance When Crafting Deep (Approx. 7D) Holes

Select to compare

Configure now
Starting from^∗ ：	57.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide, Very Small Diameter Drill 10D Type, UVM-DRL-10D

OSG

By using carbide materials, it has high hardness and high modulus of elasticity, which enables drilling of extremely small holes in general steel, heat-treated steel and high hardness steel.

Select to compare

Configure now
Starting from^∗ ：	106.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide, Very Small Diameter Drill 5D Type, UVM-DRL-5D

OSG

UVM ultra-small diameter drill, type 5D, for holes with a minimum diameter of ø0.02.

Select to compare

Configure now
Starting from^∗ ：	91.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Hole diameter (drill diameter) D(mm)
Groove Length L(mm)
work material
Tool Material Type
Overall Length L(mm)
Shank Type
Coating Y/N
Coating Type
With/without Oil Hole

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	GUHRING	SANDVIK	SANDVIK	NACHI(FUJIKOSHI)	ATOM	NACHI(FUJIKOSHI)	SANDVIK	NS TOOL	ATOM	SANDVIK	SANDVIK	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	IWATA TOOL	IWATA TOOL	ATOM	GUHRING	GUHRING	GUHRING	GUHRING	SANDVIK	NACHI(FUJIKOSHI)	SANDVIK	SANDVIK	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Holder 3 x D HT800WP 4107	Super U Drill - Cylindrical Shank	SANDVIK CoroDrill 460 Solid Carbide Step and Chamfer Drill	Aqua Drill EX Flat AQDEXZ	Micro Drill, for Stainless Steel	Aqua Drill EX Flat Long Shank AQDEXZLS	SANDVIK CoroDrill 880 Insert for Drilling	MSDH Drill for Small Diameter High-Hardness Processing	Micro Drill "NEO PRO" Standard Blade Length	SANDVIK CoroDrill 880 Indexable Insert Drill	SANDVIK CoroDrill 460 Solid Carbide Drill	Aqua Drill Hard AQDH	Aqua Micro Drill AQMD	For Broken Tap Removal EX-H-DRL	Powder HSS for Tool Steel Stub Type VPH-GDS	Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)	Toglon Hard Drill Regular ALT Coating	Toglon Hard Long Drill 20D ALT Coating	Standard Solid Drill with Coating	End Mill Shank Type 3 x D RT100U 5514	End Mill Shank Drill 5 × D with Oil Hole RT100U 5511	End Mill Shank Drill 7 x D with Oil Hole RT100U 5512	Holder 5 x D HT800WP 4108	Super U Drill - Hole Drilling Tip	Aqua Drill EX with Flat Corner R AQDEXZ-R	SANDVIK CoroDrill 880 Drill Body for Cassettes	SANDVIK CoroDrill 881 Indexable Insert Drill	TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub	TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular	TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular	TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular	Aqua Drill 3-Flute AQD3F	Aqua Drill EX Oil Hole 5D AQDEXOH5D	Aqua Drill Regular AQDR	Aqua Drill EX Regular AQDEXR	Aqua Drill EX Stub AQDEXS	Aqua Drill EX Oil Hole 3D AQDEXOH3D	Aqua Drill EX Oil Hole 8D AQDEXOH8D	Aqua Drill Stub AQDS	Extra Long Type Carbide with Oil Hole for High Hardness Mold Materials FTO-H-GDXL	3 Flute Long Neck Type Carbide for High Hardness Steel FHL-GDTS	Carbide Stub Type for High Hardness Steel FH-GDS	Medium Type Carbide for High Hardness Steel FH-GDN	Carbide, Very Small Diameter Drill 10D Type, UVM-DRL-10D	Carbide, Very Small Diameter Drill 5D Type, UVM-DRL-5D
Starting from^∗	329.56 € *Unit price with basic configuration	618.32 € *Unit price with basic configuration	-	88.02 € *Unit price with basic configuration	39.15 € Special price *Unit price with basic configuration Promotional pricing	106.97 € *Unit price with basic configuration	-	60.22 € *Unit price with basic configuration Volume Discount	35.68 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	-	-	30.77 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	39.65 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	41.10 € *Unit price with basic configuration Volume Discount	10.37 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	159.00 € *Unit price with basic configuration Volume Discount	89.60 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	101.01 € *Unit price with basic configuration	23.28 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	93.71 € *Unit price with basic configuration Volume Discount	116.22 € *Unit price with basic configuration Volume Discount	168.40 € *Unit price with basic configuration	396.51 € *Unit price with basic configuration	38.24 € *Unit price with basic configuration	102.02 € *Unit price with basic configuration	1,287.62 € *Unit price with basic configuration	-	62.95 € *Unit price with basic configuration Volume Discount	58.66 € *Unit price with basic configuration Volume Discount	55.64 € *Unit price with basic configuration Volume Discount	43.70 € *Unit price with basic configuration Volume Discount	38.41 € *Unit price with basic configuration	120.87 € *Unit price with basic configuration	87.80 € *Unit price with basic configuration	113.17 € *Unit price with basic configuration	95.75 € *Unit price with basic configuration	120.16 € *Unit price with basic configuration	127.62 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	53.04 € *Unit price with basic configuration	227.50 € *Unit price with basic configuration	67.60 € *Unit price with basic configuration	52.37 € *Unit price with basic configuration	57.45 € *Unit price with basic configuration	106.94 € *Unit price with basic configuration	91.21 € *Unit price with basic configuration
Min. Shipping Days	8 Days	6 Days	5 Days	5 Days	Same day	6 Days	5 Days	6 Days	Same day	5 Days	5 Days	Same day	Same day	6 Days	Same day	6 Days	Same day	6 Days	Same day	6 Days	6 Days	8 Days	8 Days	6 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Hole diameter (drill diameter) D(mm)	-	12.5 ～ 63	3.35 ～ 17.5	0.5 ～ 20	0.1 ～ 3	3 ～ 20	-	0.1 ～ 1	0.03 ～ 3	12 ～ 84	3 ～ 20	2 ～ 12	0.2 ～ 1.99	2 ～ 12	0.5 ～ 20	3.3 ～ 12	1 ～ 6	1.1 ～ 6	0.3 ～ 6	3 ～ 20	3 ～ 20	3 ～ 20	-	44~52 ～ 53~63	3 ～ 12	65 ～ 80	14 ～ 23.8	3 ～ 13	3 ～ 13	3 ～ 13	0.8 ～ 3	3 ～ 16	1 ～ 16	3.7 ～ 10	2.1 ～ 16	2 ～ 16	3 ～ 16	3 ～ 16	4 ～ 12.5	6 ～ 10	1 ～ 3	0.3 ～ 2	0.3 ～ 2	0.02 ～ 0.08	0.02 ～ 0.08
Groove Length L(mm)	-	28 ～ 220	-	1.65 ～ 90	1 ～ 15	14 ～ 90	-	0.2 ～ 2	0.3 ～ 25	212.77 ～ 339.15	-	12 ～ 51	2.5 ～ 15	10 ～ 60	3 ～ 66	32 ～ 96	6 ～ 36	6.6 ～ 36	4 ～ 40	20 ～ 79	28 ～ 101	30 ～ 190	-	-	14 ～ 54	-	-	20 ～ 60	20 ～ 77	16 ～ 78	6 ～ 27	16 ～ 80	8 ～ 128	24 ～ 60	17 ～ 96	8 ～ 55	17 ～ 80	33 ～ 176	22 ～ 51	140 ～ 230	5 ～ 15	1.6 ～ 12	2.5 ～ 18	0.22 ～ 0.88	0.12 ～ 0.48
work material	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[◎]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[○]	High Hardness Steel[◎]	High Hardness Steel[○/◎]	High Hardness Steel[○/◎]	High Hardness Steel[◎]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[○]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[○]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]	High Hardness Steel[◎]
Tool Material Type	-	-	-	Carbide	Carbide	Carbide	-	Carbide	Carbide	-	-	Carbide	Carbide	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	-	Carbide	-	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Overall Length L(mm)	101 ～ 254	91 ～ 331	-	47 ～ 145	38 ～ 45	100 ～ 250	-	45	38 ～ 50	295 ～ 404	62 ～ 268.986	44 ～ 108	38 ～ 47	30 ～ 110	38 ～ 132	78 ～ 156	50 ～ 120	60 ～ 200	30 ～ 80	62 ～ 131	66 ～ 153	70 ～ 244	124 ～ 334	-	50 ～ 90	-	-	62 ～ 107	62 ～ 124	46 ～ 137	47 ～ 67	48 ～ 144	56 ～ 194	56 ～ 110	49 ～ 160	45 ～ 112	68 ～ 146	81 ～ 242	54 ～ 110	190 ～ 280	57 ～ 65	38 ～ 46	38 ～ 50	38	38
Shank Type	-	End Mill Shank / Straight Shank	-	End Mill Shank / Straight Shank	End Mill Shank	End Mill Shank	-	End Mill Shank	End Mill Shank	-	-	End Mill Shank / Straight Shank	End Mill Shank	End Mill Shank / Straight Shank	End Mill Shank / Straight Shank	End Mill Shank / Straight Shank	End Mill Shank	End Mill Shank	Straight Shank	End Mill Shank	End Mill Shank	End Mill Shank	-	-	Straight Shank	-	-	End Mill Shank	End Mill Shank	Straight Shank	End Mill Shank	End Mill Shank / Straight Shank	End Mill Shank / Straight Shank	End Mill Shank / Straight Shank	End Mill Shank / Straight Shank	End Mill Shank / Straight Shank	End Mill Shank / Straight Shank	End Mill Shank / Straight Shank	End Mill Shank / Straight Shank	Straight Shank	End Mill Shank / Straight Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank
Coating Y/N	N/A	-	-	Available	Available	Available	-	Available	Available	-	-	Available	Available	N/A	Available	Available	Available	Available	Available	Available	Available	Available	N/A	-	Available	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	-	-	-	Other	For General Steels (AlCrN, etc.)	Other	-	TiAlN	For General Steels (AlCrN, etc.)	-	-	Other	Other	Non-Coated	Other	Other	TiAlN	TiAlN	TiAlN	Other	Other	Other	-	-	For General Steels (AlCrN, etc.)	-	-	-	-	-	-	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other
With/without Oil Hole	Available	N/A	-	N/A	N/A	Available / N/A	-	N/A	N/A	-	-	N/A	N/A	N/A	N/A	Available	N/A	N/A	N/A	N/A	Available	Available	Available	-	N/A	-	-	N/A	N/A	N/A	N/A	N/A	Available	N/A	N/A	-	Available	Available	N/A	Available	N/A	Available	N/A	N/A	N/A

Filter by:

Stock

- Show only stock items
Clear

Hole diameter (drill diameter) D(mm)
- 0～0.995
  - 0
  - 0.01
  - 0.015
  - 0.02
  - 0.025
  - 0.03
  - 0.035
  - 0.04
  - 0.045
  - 0.05
  - 0.055
  - 0.06
  - 0.065
  - 0.07
  - 0.075
  - 0.08
  - 0.085
  - 0.09
  - 0.095
  - 0.1
  - 0.105
  - 0.11
  - 0.115
  - 0.12
  - 0.125
  - 0.128
  - 0.13
  - 0.135
  - 0.14
  - 0.143
  - 0.145
  - 0.147
  - 0.15
  - 0.155
  - 0.16
  - 0.165
  - 0.17
  - 0.175
  - 0.18
  - 0.185
  - 0.19
  - 0.195
  - 0.2
  - 0.205
  - 0.21
  - 0.215
  - 0.22
  - 0.225
  - 0.23
  - 0.235
  - 0.24
  - 0.245
  - 0.25
  - 0.255
  - 0.26
  - 0.265
  - 0.27
  - 0.275
  - 0.28
  - 0.285
  - 0.29
  - 0.295
  - 0.3
  - 0.305
  - 0.31
  - 0.315
  - 0.32
  - 0.325
  - 0.33
  - 0.335
  - 0.34
  - 0.345
  - 0.35
  - 0.355
  - 0.36
  - 0.365
  - 0.37
  - 0.375
  - 0.38
  - 0.385
  - 0.39
  - 0.395
  - 0.4
  - 0.405
  - 0.41
  - 0.415
  - 0.42
  - 0.425
  - 0.43
  - 0.432
  - 0.435
  - 0.44
  - 0.445
  - 0.45
  - 0.455
  - 0.46
  - 0.465
  - 0.47
  - 0.475
  - 0.48
  - 0.485
  - 0.49
  - 0.495
  - 0.5
  - 0.505
  - 0.51
  - 0.515
  - 0.52
  - 0.525
  - 0.53
  - 0.535
  - 0.54
  - 0.545
  - 0.55
  - 0.555
  - 0.56
  - 0.565
  - 0.57
  - 0.575
  - 0.58
  - 0.585
  - 0.59
  - 0.595
  - 0.6
  - 0.605
  - 0.61
  - 0.615
  - 0.62
  - 0.625
  - 0.63
  - 0.632
  - 0.635
  - 0.64
  - 0.645
  - 0.65
  - 0.655
  - 0.66
  - 0.665
  - 0.67
  - 0.675
  - 0.68
  - 0.685
  - 0.69
  - 0.695
  - 0.7
  - 0.705
  - 0.71
  - 0.715
  - 0.72
  - 0.725
  - 0.73
  - 0.735
  - 0.74
  - 0.745
  - 0.75
  - 0.755
  - 0.76
  - 0.765
  - 0.77
  - 0.775
  - 0.78
  - 0.785
  - 0.79
  - 0.795
  - 0.8
  - 0.805
  - 0.81
  - 0.815
  - 0.82
  - 0.825
  - 0.83
  - 0.835
  - 0.84
  - 0.845
  - 0.85
  - 0.855
  - 0.86
  - 0.865
  - 0.87
  - 0.875
  - 0.88
  - 0.885
  - 0.89
  - 0.895
  - 0.9
  - 0.905
  - 0.91
  - 0.915
  - 0.92
  - 0.925
  - 0.93
  - 0.935
  - 0.94
  - 0.945
  - 0.95
  - 0.955
  - 0.96
  - 0.965
  - 0.97
  - 0.975
  - 0.98
  - 0.985
  - 0.99
  - 0.995
- 1～1.995
  - 1
  - 1.005
  - 1.01
  - 1.015
  - 1.02
  - 1.025
  - 1.03
  - 1.035
  - 1.04
  - 1.045
  - 1.05
  - 1.055
  - 1.06
  - 1.065
  - 1.07
  - 1.075
  - 1.08
  - 1.085
  - 1.09
  - 1.095
  - 1.1
  - 1.105
  - 1.11
  - 1.115
  - 1.12
  - 1.125
  - 1.13
  - 1.135
  - 1.14
  - 1.145
  - 1.15
  - 1.155
  - 1.16
  - 1.165
  - 1.17
  - 1.175
  - 1.18
  - 1.185
  - 1.19
  - 1.195
  - 1.2
  - 1.205
  - 1.21
  - 1.215
  - 1.22
  - 1.225
  - 1.23
  - 1.235
  - 1.24
  - 1.245
  - 1.25
  - 1.255
  - 1.26
  - 1.265
  - 1.27
  - 1.275
  - 1.28
  - 1.285
  - 1.29
  - 1.295
  - 1.3
  - 1.305
  - 1.31
  - 1.315
  - 1.32
  - 1.325
  - 1.33
  - 1.335
  - 1.34
  - 1.345
  - 1.35
  - 1.355
  - 1.36
  - 1.365
  - 1.37
  - 1.375
  - 1.38
  - 1.385
  - 1.39
  - 1.395
  - 1.4
  - 1.405
  - 1.41
  - 1.415
  - 1.42
  - 1.425
  - 1.43
  - 1.435
  - 1.44
  - 1.445
  - 1.45
  - 1.455
  - 1.46
  - 1.465
  - 1.47
  - 1.475
  - 1.48
  - 1.485
  - 1.49
  - 1.495
  - 1.5
  - 1.5X10D
  - 1.505
  - 1.51
  - 1.515
  - 1.52
  - 1.525
  - 1.53
  - 1.535
  - 1.54
  - 1.545
  - 1.55
  - 1.555
  - 1.56
  - 1.565
  - 1.57
  - 1.575
  - 1.58
  - 1.585
  - 1.59
  - 1.595
  - 1.6
  - 1.6×10D
  - 1.605
  - 1.61
  - 1.615
  - 1.62
  - 1.625
  - 1.63
  - 1.635
  - 1.64
  - 1.645
  - 1.65
  - 1.655
  - 1.66
  - 1.665
  - 1.67
  - 1.675
  - 1.68
  - 1.685
  - 1.69
  - 1.695
  - 1.7
  - 1.705
  - 1.71
  - 1.715
  - 1.72
  - 1.725
  - 1.73
  - 1.735
  - 1.74
  - 1.745
  - 1.75
  - 1.755
  - 1.76
  - 1.765
  - 1.77
  - 1.775
  - 1.78
  - 1.785
  - 1.79
  - 1.795
  - 1.8
  - 1.8×10D
  - 1.805
  - 1.81
  - 1.815
  - 1.82
  - 1.825
  - 1.83
  - 1.835
  - 1.84
  - 1.845
  - 1.85
  - 1.855
  - 1.86
  - 1.865
  - 1.87
  - 1.875
  - 1.88
  - 1.885
  - 1.89
  - 1.895
  - 1.9
  - 1.905
  - 1.91
  - 1.915
  - 1.92
  - 1.925
  - 1.93
  - 1.935
  - 1.94
  - 1.945
  - 1.95
  - 1.955
  - 1.96
  - 1.965
  - 1.97
  - 1.975
  - 1.98
  - 1.984
  - 1.985
  - 1.99
  - 1.995
- 2～2.99
  - 2
  - 2×10D
  - 2.01
  - 2.015
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.1×10D
  - 2.11
  - 2.115
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.2×10D
  - 2.21
  - 2.215
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.3×10D
  - 2.31
  - 2.315
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.383
  - 2.39
  - 2.4
  - 2.4×10D
  - 2.41
  - 2.415
  - 2.42
  - 2.43
  - 2.439
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.489
  - 2.49
  - 2.5
  - 2.5×10D
  - 2.51
  - 2.515
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.578
  - 2.58
  - 2.59
  - 2.6
  - 2.6×10D
  - 2.61
  - 2.615
  - 2.62
  - 2.63
  - 2.64
  - 2.642
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.7×10D
  - 2.705
  - 2.71
  - 2.715
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.779
  - 2.78
  - 2.79
  - 2.8
  - 2.8×10D
  - 2.81
  - 2.815
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.9×10D
  - 2.91
  - 2.915
  - 2.92
  - 2.93
  - 2.94
  - 2.947
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3×10D
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.048
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.1×10D
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.2×10D
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.264
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.3×10D
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.35 / 4.50
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.40 / 4.60
  - 3.4×10D
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.455
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.5×10D
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.571
  - 3.58
  - 3.59
  - 3.6
  - 3.6×10D
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.658
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.70 / 5.00
  - 3.7×10D
  - 3.71
  - 3.72
  - 3.73
  - 3.734
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.8×10D
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.9×10D
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4×10D
  - 4.01
  - 4.02
  - 4.03
  - 4.039
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.1×10D
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.2×10D
  - 4.21
  - 4.217
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.25 / 5.70
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.30 / 5.80
  - 4.3×10D
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.366
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.4×10D
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.5×10D
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.6×10D
  - 4.61
  - 4.62
  - 4.623
  - 4.63
  - 4.64
  - 4.65
  - 4.65 / 5.90
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.7×10D
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.763
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.8×10D
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.852
  - 4.86
  - 4.864
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.9×10D
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.00 / 6.80
  - 5×10D
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.10 / 6.90
  - 5.1×10D
  - 5.106
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.159
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.2×10D
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.30 / 7.20
  - 5.3×10D
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.4×10D
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.50 / 7.40
  - 5.5×10D
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.55 / 7.50
  - 5.558
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.6×10D
  - 5.61
  - 5.616
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.7×10D
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.8×10D
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.9×10D
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.954
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.97
  - 6
  - 6×10D
  - 6.01
  - 6.02
  - 6.03
  - 6.04
  - 6.05
  - 6.06
  - 6.07
  - 6.08
  - 6.09
  - 6.1
  - 6.1×10D
  - 6.13
  - 6.15
  - 6.2
  - 6.2×10D
  - 6.23
  - 6.25
  - 6.3
  - 6.3×10D
  - 6.33
  - 6.35
  - 6.35 (¼")
  - 6.37
  - 6.375
  - 6.4
  - 6.4×10D
  - 6.43
  - 6.45
  - 6.5
  - 6.5×10D
  - 6.528
  - 6.53
  - 6.55
  - 6.6
  - 6.60 / 8.90
  - 6.6×10D
  - 6.63
  - 6.65
  - 6.7
  - 6.7×10D
  - 6.73
  - 6.746
  - 6.75
  - 6.75 / 9.10
  - 6.76
  - 6.8
  - 6.8×10D
  - 6.83
  - 6.85
  - 6.85 / 9.20
  - 6.9
  - 6.90 / 9.30
  - 6.9×10D
  - 6.91
  - 6.93
  - 6.95
  - 6.97
- 7～7.98
  - 7
  - 7.00 / 9.50
  - 7×10D
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.1×10D
  - 7.13
  - 7.14
  - 7.145
  - 7.15
  - 7.2
  - 7.2×10D
  - 7.23
  - 7.25
  - 7.25 / 9.80
  - 7.3
  - 7.30 / 9.80
  - 7.3×10D
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.4
  - 7.40 / 9.80
  - 7.4×10D
  - 7.43
  - 7.45
  - 7.49
  - 7.5
  - 7.5×10D
  - 7.52
  - 7.53
  - 7.54
  - 7.541
  - 7.55
  - 7.6
  - 7.6×10D
  - 7.63
  - 7.65
  - 7.67
  - 7.7
  - 7.7×10D
  - 7.73
  - 7.75
  - 7.8
  - 7.8×10D
  - 7.83
  - 7.85
  - 7.9
  - 7.9×10D
  - 7.93
  - 7.938
  - 7.94
  - 7.94 to 8.49
  - 7.95
  - 7.96
  - 7.97
  - 7.98
- 8～8.96
  - 8
  - 8×10D
  - 8.00 / 10.80
  - 8.01
  - 8.02
  - 8.03
  - 8.04
  - 8.05
  - 8.06
  - 8.07
  - 8.08
  - 8.09
  - 8.1
  - 8.1×10D
  - 8.13
  - 8.15
  - 8.2
  - 8.2×10D
  - 8.23
  - 8.25
  - 8.3
  - 8.3×10D
  - 8.33
  - 8.334
  - 8.35
  - 8.4
  - 8.4×10D
  - 8.43
  - 8.433
  - 8.45
  - 8.5
  - 8.50 to 8.99
  - 8.5×10D
  - 8.50 / 11.50
  - 8.50000000000001
  - 8.53
  - 8.55
  - 8.58
  - 8.6
  - 8.6×10D
  - 8.60 / 11.60
  - 8.61
  - 8.63
  - 8.65
  - 8.7
  - 8.7×10D
  - 8.70 / 11.70
  - 8.73
  - 8.733
  - 8.75
  - 8.8
  - 8.8×10D
  - 8.80000000000001
  - 8.83
  - 8.84
  - 8.85
  - 8.9
  - 8.9×10D
  - 8.90000000000001
  - 8.93
  - 8.95
  - 8.96
- 9～9.97
  - 9
  - 9.00 to 9.49
  - 9×10D
  - 9.00 / 11.80
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.1×10D
  - 9.129
  - 9.13
  - 9.15
  - 9.2
  - 9.2×10D
  - 9.20000000000001
  - 9.21
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.3
  - 9.3×10D
  - 9.30 / 12.60
  - 9.30000000000001
  - 9.33
  - 9.34
  - 9.347
  - 9.35
  - 9.36
  - 9.38
  - 9.4
  - 9.4×10D
  - 9.40000000000001
  - 9.43
  - 9.45
  - 9.5
  - 9.50 to 9.99
  - 9.5×10D
  - 9.50 to 11.07
  - 9.50000000000001
  - 9.52
  - 9.525
  - 9.53
  - 9.54
  - 9.55
  - 9.58
  - 9.6
  - 9.6×10D
  - 9.60000000000001
  - 9.63
  - 9.65
  - 9.7
  - 9.7×10D
  - 9.70000000000001
  - 9.73
  - 9.75
  - 9.8
  - 9.8×10D
  - 9.80000000000001
  - 9.83
  - 9.85
  - 9.9
  - 9.9×10D
  - 9.90000000000001
  - 9.92
  - 9.921
  - 9.93
  - 9.95
  - 9.96
  - 9.97
- 10～10.96
  - 10
  - 10×10D
  - 10.00 - 10.49
  - 10.00 to 10.49
  - 10.01
  - 10.02
  - 10.03
  - 10.04
  - 10.05
  - 10.06
  - 10.07
  - 10.08
  - 10.09
  - 10.1
  - 10.1×10D
  - 10.13
  - 10.15
  - 10.2
  - 10.2×10D
  - 10.23
  - 10.25
  - 10.25 / 13.80
  - 10.26
  - 10.3
  - 10.3×10D
  - 10.30 / 13.80
  - 10.32
  - 10.33
  - 10.35
  - 10.4
  - 10.4×10D
  - 10.40 / 13.80
  - 10.43
  - 10.45
  - 10.49
  - 10.5
  - 10.5×10D
  - 10.50 - 10.99
  - 10.50 to 10.99
  - 10.50 / 13.80
  - 10.53
  - 10.55
  - 10.6
  - 10.6×10D
  - 10.63
  - 10.65
  - 10.7
  - 10.7×10D
  - 10.71
  - 10.716
  - 10.72
  - 10.73
  - 10.75
  - 10.8
  - 10.8×10D
  - 10.80 / 14.60
  - 10.83
  - 10.85
  - 10.9
  - 10.9×10D
  - 10.93
  - 10.95
  - 10.96
- 11～11.96
  - 11
  - 11×10D
  - 11.00 - 11.49
  - 11.00 to 11.49
  - 11.00 / 14.90
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.1×10D
  - 11.10 to 12.95
  - 11.11
  - 11.113
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.2
  - 11.2×10D
  - 11.20 / 15.10
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.3
  - 11.3×10D
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.38
  - 11.4
  - 11.4×10D
  - 11.43
  - 11.45
  - 11.5
  - 11.5×10D
  - 11.50 - 11.99
  - 11.50 to 11.99
  - 11.50 / 15.50
  - 11.509
  - 11.51
  - 11.53
  - 11.55
  - 11.56
  - 11.6
  - 11.6×10D
  - 11.63
  - 11.65
  - 11.7
  - 11.7×10D
  - 11.73
  - 11.75
  - 11.8
  - 11.8×10D
  - 11.83
  - 11.85
  - 11.9
  - 11.9×10D
  - 11.908
  - 11.91
  - 11.93
  - 11.95
  - 11.96
- 12～12.98 to 17.65
  - 12
  - 12×10D
  - 12.00 - 12.49
  - 12.00 to 12.49
  - 12.00 to 12.99
  - 12.00 / 15.80
  - 12.01
  - 12.02
  - 12.03
  - 12.04
  - 12.05
  - 12.06
  - 12.07
  - 12.08
  - 12.09
  - 12.1
  - 12.10 / 16.30
  - 12.2
  - 12.25
  - 12.25 / 16.50
  - 12.3
  - 12.304
  - 12.4
  - 12.5
  - 12.50 - 12.99
  - 12.50 to 12.99
  - 12.50 / 16.90
  - 12.55
  - 12.6
  - 12.7
  - 12.75
  - 12.8
  - 12.9
  - 12.95
  - 12.96
  - 12.98 to 17.65
- 13～13.95
  - 13
  - 13.00 - 13.49
  - 13.00 to 13.49
  - 13.00 to 13.99
  - 13.096
  - 13.1
  - 13.2
  - 13.25
  - 13.3
  - 13.4
  - 13.43
  - 13.487
  - 13.49
  - 13.5
  - 13.50 - 13.99
  - 13.50 to 13.99
  - 13.50 / 17.80
  - 13.55
  - 13.6
  - 13.65
  - 13.7
  - 13.75
  - 13.8
  - 13.89
  - 13.891
  - 13.9
  - 13.95
- 14～14.96
  - 14
  - 14.00 to 14.49
  - 14.0～14.5
  - 14.00 - 14.99
  - 14.00 to 14.99
  - 14~16
  - 14.00 / 18.90
  - 14.1
  - 14.10 / 19.00
  - 14.2
  - 14.25
  - 14.25 / 19.20
  - 14.275
  - 14.288
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.50 to 14.99
  - 14.50 / 19.60
  - 14.55
  - 14.6
  - 14.6～15.5
  - 14.68
  - 14.684
  - 14.69
  - 14.7
  - 14.75
  - 14.8
  - 14.9
  - 14.95
  - 14.96
- 15～15.95
  - 15
  - 15.00 - 15.99
  - 15.00 to 15.99
  - 15.08
  - 15.083
  - 15.1
  - 15.10 / 19.80
  - 15.2
  - 15.25
  - 15.3
  - 15.4
  - 15.479
  - 15.48
  - 15.5
  - 15.50 to 17.65
  - 15.55
  - 15.6
  - 15.6～16.5
  - 15.7
  - 15.75
  - 15.8
  - 15.87
  - 15.875
  - 15.88
  - 15.9
  - 15.95
- 16～16.9
  - 16
  - 16.00 - 16.99
  - 16.00 to 16.99
  - 16.08
  - 16.1
  - 16.13
  - 16.2
  - 16.25
  - 16.27
  - 16.271
  - 16.3
  - 16.4
  - 16.5
  - 16.5~19.5
  - 16.55
  - 16.6
  - 16.6～17.5
  - 16.662
  - 16.67
  - 16.7
  - 16.75
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.00 - 17.99
  - 17.00 to 17.99
  - 17.07
  - 17.1
  - 17.2
  - 17.25
  - 17.3
  - 17.4
  - 17.45
  - 17.46
  - 17.463
  - 17.5
  - 17.50 / 19.80
  - 17.53 to 24.38
  - 17.55
  - 17.6
  - 17.6～18.5
  - 17.7
  - 17.75
  - 17.8
  - 17.86
  - 17.9
- 18～18.9
  - 18
  - 18.00 - 18.99
  - 18.00 to 18.99
  - 18.00 to 19.99
  - 18.1
  - 18.2
  - 18.25
  - 18.258
  - 18.26
  - 18.3
  - 18.35
  - 18.4
  - 18.5
  - 18.6
  - 18.6～19.5
  - 18.65
  - 18.654
  - 18.7
  - 18.75
  - 18.8
  - 18.9
- 19～19.95
  - 19
  - 19.00 - 19.99
  - 19.00 to 19.99
  - 19.05
  - 19.1
  - 19.2
  - 19.25
  - 19.3
  - 19.4
  - 19.45
  - 19.5
  - 19.55
  - 19.6
  - 19.6～20.5
  - 19.7
  - 19.75
  - 19.8
  - 19.84
  - 19.9
  - 19.95
- 20～20.9
  - 20
  - 20.00 - 20.99
  - 20.00 to 20.99
  - 20.00 to 21.99
  - 20~23.9
  - 20.1
  - 20.2
  - 20.24
  - 20.25
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.6～21.5
  - 20.62
  - 20.625
  - 20.64
  - 20.7
  - 20.75
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.00 - 21.99
  - 21.00 to 21.99
  - 21.03
  - 21.1
  - 21.2
  - 21.25
  - 21.3
  - 21.4
  - 21.43
  - 21.5
  - 21.6
  - 21.6～22.5
  - 21.7
  - 21.75
  - 21.8
  - 21.83
  - 21.83 to 24.38
  - 21.9
- 22～22.9
  - 22
  - 22.00 - 22.99
  - 22.00 to 22.99
  - 22.00 to 23.99
  - 22.1
  - 22.2
  - 22.22
  - 22.225
  - 22.23
  - 22.25
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.6～23.5
  - 22.62
  - 22.7
  - 22.75
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.00 - 23.99
  - 23.00 to 23.99
  - 23.02
  - 23.1
  - 23.2
  - 23.25
  - 23.3
  - 23.4
  - 23.42
  - 23.5
  - 23.6
  - 23.6～24.5
  - 23.7
  - 23.75
  - 23.79
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.00 - 24.99
  - 24.00 to 24.99
  - 24.00 to 25.99
  - 24.1
  - 24.2
  - 24.21
  - 24.25
  - 24.3
  - 24.4
  - 24.41 to 35.05
  - 24.5
  - 24.5/24.7
  - 24.6
  - 24.6～25.5
  - 24.61
  - 24.7
  - 24.75
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.00 to 25.50
  - 25.00 - 25.99
  - 25.1
  - 25.2
  - 25.25
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.6～26.5
  - 25.7
  - 25.75
  - 25.8
  - 25.9
- 26～26.99
  - 26
  - 26.00 - 26.99
  - 26.00 to 28.99
  - 26.1
  - 26.19
  - 26.2
  - 26.25
  - 26.3
  - 26.4
  - 26.5
  - 26.5/26.7
  - 26.59
  - 26.6
  - 26.6～27.5
  - 26.65
  - 26.7
  - 26.75
  - 26.8
  - 26.9
  - 26.97
  - 26.975
  - 26.99
- 27～27.9
  - 27
  - 27.00 - 27.99
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.6～28.5
  - 27.7
  - 27.75
  - 27.78
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.00 - 28.99
  - 28.1
  - 28.2
  - 28.25
  - 28.3
  - 28.4
  - 28.5
  - 28.57
  - 28.575
  - 28.58
  - 28.6
  - 28.6～29.5
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.00 - 29.99
  - 29.00 to 31.99
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.56
  - 29.6
  - 29.6～30.5
  - 29.65
  - 29.7
  - 29.8
  - 29.9
- 30～30.8
  - 30
  - 30.00 - 30.99
  - 30.00 to 35.05
  - 30.1
  - 30.14
  - 30.15
  - 30.2
  - 30.3
  - 30.5
  - 30.6～31.5
  - 30.7
  - 30.8
- 31～31.8
  - 31
  - 31.00 - 33.00
  - 31.2
  - 31.3
  - 31.5
  - 31.6～32.0
  - 31.7
  - 31.75
  - 31.8
- 32～32.8
  - 32
  - 32.00 to 35.00
  - 32.15
  - 32.2
  - 32.3
  - 32.5
  - 32.7
  - 32.8
- 33～33.5
  - 33
  - 33.325
  - 33.5
- 34～34.925
  - 34
  - 34.36 to 47.80
  - 34.5
  - 34.925
- 35～35.5
  - 35
  - 35.5
- 36～36.91
  - 36
  - 36~43
  - 36.5
  - 36.91
- 37～37.7
  - 37
  - 37.5
  - 37.7
- 38～38.5
  - 38
  - 38.1
  - 38.5
- 39～39.675
  - 39
  - 39.5
  - 39.67
  - 39.675
- 40～40.5
  - 40
  - 40.5
- 41～41.5
  - 41
  - 41.275
  - 41.5
- 42～42.85
  - 42
  - 42.5
  - 42.84
  - 42.85
- 43～43.5
  - 43
  - 43.5
- 44～44.8
  - 44
  - 44~52
  - 44.45
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.5
- 46～46.99 to 65.28
  - 46
  - 46.5
  - 46.99 to 65.28
- 47～47.63
  - 47
  - 47.5
  - 47.625
  - 47.63
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51～51.5
  - 51
  - 51.5
- 52～52.5
  - 52
  - 52.5
- 53～53.975
  - 53
  - 53~63
  - 53.5
  - 53.975
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.2
  - 55.5
- 56～56.5
  - 56
  - 56.5
- 57～57.5
  - 57
  - 57.15
  - 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60～60.5
  - 60
  - 60.325
  - 60.5
- 61～61.5
  - 61
  - 61.5
- 62～62.5
  - 62
  - 62.38 to 89.08
  - 62.5
- 63～63.5
  - 63
  - 63.5
- 64～64.5
  - 64
  - 64.5
- 65～65.5
  - 65
  - 65.5
- 66～66.5
  - 66
  - 66.5
- 67～67.5
  - 67
  - 67.5
- 68～68.5
  - 68
  - 68.5
- 69～69.5
  - 69
  - 69.5
- 70～70.5
  - 70
  - 70.5
- 71～71.5
  - 71
  - 71.5
- 72～72.5
  - 72
  - 72.5
- 73～73.5
  - 73
  - 73.5
- 74～74.5
  - 74
  - 74.5
- 75
- 76
- 77
- 78
- 79～79.50
  - 79
  - 79.50
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87～87.76 to 114.48
  - 87
  - 87.76 to 114.48
- 88
- 89
- 90
- 91
- 92
- 93
- 94～94.50
  - 94
  - 94.50
- 95～95.50
  - 95
  - 95.50
- 96
- 97
- 98
- 99
- 100
- 103
- 105
- 110
- 115
- 120
Drawing

Clear

Groove Length L(mm)
- 0～0.9
  - 0
  - 0.015
  - 0.025
  - 0.04
  - 0.05
  - 0.06
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.12
  - 0.14
  - 0.15
  - 0.16
  - 0.18
  - 0.2
  - 0.22
  - 0.24
  - 0.25
  - 0.3
  - 0.33
  - 0.4
  - 0.44
  - 0.48
  - 0.5
  - 0.55
  - 0.6
  - 0.7
  - 0.8
  - 0.88
  - 0.9
- 1～1.98
  - 1
  - 1,000
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.65
  - 1.7
  - 1.8
  - 1.9
  - 1.98
- 2～2.97
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.31
  - 2.4
  - 2.5
  - 2.6
  - 2.64
  - 2.7
  - 2.8
  - 2.9
  - 2.97
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.8
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.7
  - 5.8
- 6～6.8
  - 6
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.8
- 7～7.8
  - 7
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.8
- 8～8.8
  - 8
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.8
- 9～9.8
  - 9
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.8
- 10～10.8
  - 10
  - 10..1
  - 10.2
  - 10.4
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
- 12～12.8
  - 12
  - 12.2
  - 12.3
  - 12.5
  - 12.6
  - 12.8
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.5
  - 13.8
- 14～14.9
  - 14
  - 14.3
  - 14.4
  - 14.5
  - 14.8
  - 14.9
- 15～15.8
  - 15
  - 15.3
  - 15.6
  - 15.8
- 16～16.8
  - 16
  - 16.05
  - 16.1
  - 16.2
  - 16.5
  - 16.7
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.8
- 18～18.9
  - 18
  - 18.5
  - 18.6
  - 18.8
  - 18.9
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.55
  - 19.6
  - 19.7
  - 19.8
- 20～20.7
  - 20
  - 20.3
  - 20.4
  - 20.7
- 21～21.8
  - 21
  - 21.2
  - 21.4
  - 21.6
  - 21.8
- 22～22.8
  - 22
  - 22.05
  - 22.1
  - 22.2
  - 22.5
  - 22.8
- 23～23.9
  - 23
  - 23.3
  - 23.4
  - 23.9
- 24～24.8
  - 24
  - 24.25
  - 24.3
  - 24.5
  - 24.6
  - 24.8
- 25～25.8
  - 25
  - 25.2
  - 25.5
  - 25.7
  - 25.8
- 26～26.6
  - 26
  - 26.1
  - 26.3
  - 26.4
  - 26.6
- 27～27.8
  - 27
  - 27.6
  - 27.8
- 28～28.8
  - 28
  - 28.1
  - 28.2
  - 28.5
  - 28.8
- 29～29.5
  - 29
  - 29.3
  - 29.4
  - 29.5
- 30～30.8
  - 30
  - 30.6
  - 30.8
- 31～31.7
  - 31
  - 31.2
  - 31.5
  - 31.7
- 32～32.4
  - 32
  - 32.3
  - 32.4
- 33～33.8
  - 33
  - 33.5
  - 33.6
  - 33.8
- 34～34.8
  - 34
  - 34.1
  - 34.4
  - 34.5
  - 34.8
- 35～35.5
  - 35
  - 35.3
  - 35.5
- 36～36.8
  - 36
  - 36.5
  - 36.8
- 37～37.5
  - 37
  - 37.5
- 38～38.3
  - 38
  - 38.3
- 39～39.8
  - 39
  - 39.8
- 40～40.5
  - 40
  - 40.5
- 41～41.3
  - 41
  - 41.3
- 42～42.8
  - 42
  - 42.8
- 43～43.5
  - 43
  - 43.5
- 44～44.3
  - 44
  - 44.3
- 45
- 46～46.5
  - 46
  - 46.5
- 47
- 48
- 49～49.5
  - 49
  - 49.5
- 50
- 51
- 52～52.5
  - 52
  - 52.5
- 53
- 54
- 55～55.5
  - 55
  - 55.5
- 56
- 57
- 58～58.5
  - 58
  - 58.5
- 59
- 60
- 61～61.5
  - 61
  - 61.5
- 62
- 63～63.4
  - 63
  - 63.4
- 64～64.5
  - 64
  - 64.5
- 65～65.5
  - 65
  - 65.5
- 66
- 67～67.5
  - 67
  - 67.1
  - 67.5
- 68
- 69
- 70～70.5
  - 70
  - 70.5
- 71～71.7
  - 71
  - 71.7
- 72
- 73～73.5
  - 73
  - 73.5
- 74
- 75
- 76～76.8
  - 76
  - 76.5
  - 76.8
- 77
- 78
- 79～79.5
  - 79
  - 79.5
- 80
- 81～81.4
  - 81
  - 81.4
- 82～82.5
  - 82
  - 82.5
- 83
- 84
- 85～85.5
  - 85
  - 85.4
  - 85.5
- 86
- 87
- 88～88.5
  - 88
  - 88.5
- 89
- 90～90.1
  - 90
  - 90.1
- 91
- 92～92.5
  - 92
  - 92.5
- 93
- 94～94.7
  - 94
  - 94.7
- 95
- 96
- 97
- 98～98.8
  - 98
  - 98.8
- 99
- 100
- 101
- 102
- 103～103.4
  - 103
  - 103.4
- 104
- 105
- 106
- 107
- 108～108.4
  - 108
  - 108.4
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 140
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 188
- 189
- 190
- 191
- 193
- 194
- 195
- 196
- 197
- 198
- 200
- 201
- 205
- 206
- 207
- 208
- 209
- 210
- 212～212.77
  - 212
  - 212.77
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 222
- 223
- 224
- 225
- 227
- 228
- 230
- 231
- 232
- 234
- 235
- 239
- 240
- 242
- 245
- 246
- 247
- 248
- 249.63
- 250
- 252
- 253
- 254
- 255
- 257
- 258
- 260～260.15
  - 260
  - 260.15
- 262
- 263
- 264
- 265
- 267
- 270
- 272
- 274
- 275
- 276
- 277
- 278
- 280
- 281.77
- 282
- 285
- 287
- 290
- 292
- 295
- 298
- 300
- 302
- 305
- 310
- 315
- 318
- 320
- 321
- 322
- 323～323.63
  - 323
  - 323.63
- 325
- 327
- 330
- 337
- 339.15
- 340
- 343
- 350
- 355
- 360
- 370
- 372
- 385
- 400
- 402
- 432
- 440
- 450
- 460
- 500
- 512
- 550
- 600
- 692
- 700
- 800
- 860
- 1030
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
- Machinable Ceramics
Details

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- PCD
- High Vanadium HSS
- High-grade Powdered High-Speed Steel
Details

Clear

Overall Length L(mm)
1,200

1,500

19

20

21

22

23

24

25

26

27

28

30

32

33

34

35

36

37

38

39

40

41

42

42.5

43

44

45

45.5

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

61.163

62

63

64

65

65.176

65.989

66

67

68

69

70

71

72

73

74

75

76

77

77.343

78

78.994

79

80

81

81.991

82

83

84

85

86

86.741

86.995

87

88

89

89.992

90

91

92

93

94

95

95.6

96

97

97.6

98

99

99.517

99.644

100

100.736

100.99

101

102

102.5

103

103.886

103.988

104

104.6

105

105.5

106

107

108

108.5

109

110

111

111.1

111.5

111.9

112

113

113.5

114

115

115.646

115.9

116

116.6

117

118

119

119.3

120

120.879

121

122

122.4

123

124

125

125.1

125.984

126

126.5

127

128

129

129.5

130

131

131.3

131.8

132

132.5

133

134

134.1

135

135.5

136

137

138

138.5

139

139.7

140

141

141.5

142

142.1

142.6

143

144

144.5

145

146

146.2

147

147.3

147.5

148

148.5

149

150

150.5

151

151.994

152

152.3

152.4

152.7

153

154

155

156

156.1

157

158

159

159.5

160

161

161.3

162

162.5

163

163.2

164

164.3

165

165.5

165.8

166

167

168

168.5

168.6

169

169.8

170

170.1

171

172

173

173.5

174

174.6

175

175.3

176

177

178

179

179.984

180

181

182

182.4

183

183.4

184

185

186

187

188

188.1

188.6

189

190

190.5

191

192

192.9

193

194

195

196

196.2

197

198

199

199.3

200

200.1

201

201.981

202

203

204

205

206

207

208

209

209.3

210

210.8

211

212

213

214

215

216

217

218

219

220

221

221.8

222

223

224

225

226

226.974

227

227.7

228

229

230

231

232

232.5

233

234

235

236

237

238

239

239.4

240

241

242

243

243.7

244

245

245.974

245.999

246

246.1

247

248

249

249.4

250

251

251.8

252

252.1

253

254

255

256

256.4

257

257.3

258

259

260

260.1

261

261.6

262

263

264

265

267

268

268.986

269

270

271

272

273

273.8

274

275

276

277

278

279

280

281

282

283

283.3

284

285

286

287

287.5

288

289

290

290.2

291

292

293

294

295

296

297

298

300

301

301.7

302

303

304

304.1

305

306

307

309

310

311

312

313

314

315

317

318

319

319.1

320

321

321.7

322

323

324.1

324.6

325

326

327

328

329

330

331

331.8

331.9

332

334

334.2

335

336

339

340

341

342

343

344

345

347

349

350

351

352

354

355

359

360

363

363.2

363.5

363.6

364

365

366

367

368.0

369

369.9

370

371

373.9

374

375

375.4

377

380

382

382.6

383

385

386

388

390

391

391.8

393

394

397

398

399

400

403

404

405

406

407.1

408

410

412

413

416

417

418

420

422

423

424

425

426

427

428

429

430

430.2

432

435

435.8

436

437

439.7

440

441

442

445

447

450

455

460

462.1

465

465.1

466.0

470

471.6

475

480

485

487.75

490

495

500

506.7

510

514

519.35

520

525

529

530

531.8

534

540

541.3

541.5

550

550.5

552

557

560

562

572

579.35

582

592

600

602

612

614.1

625

649.5

658.5

681.1

700

722.3

740

744.7

795.1

800

823.9

829.35

909.7

910

969.35

998.7

1000

1080
Drawing

Clear

Shank Type
- End Mill Shank
- Straight Shank
- Taper shank
Images

Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- CrN
- Dia Coat
- Non-Coated
- Other
Details

Clear

With/without Oil Hole
- Available
- N/A
Clear

Brand

- MISUMI (4)
- Cost Efficient Products ()
- NACHI(FUJIKOSHI) (23)
- GUHRING (21)
- OSG (12)
- SANDVIK (11)
- IWATA TOOL (8)
- ATOM (7)
- OKAZAKI SEIKO (4)
- DIJET (3)
- WIDIN (2)
- 7 LEADERS (1)
- NS TOOL (1)
- RYOKO SEIKI (0)
- UNION TOOL (0)
- HOZAN (0)
- MAKITA (0)
- OMIKOGYO (0)
- ALPEN (0)
- METABO (0)
- BICTOOL (0)
- DIXI (0)
- KYOWA SEIKO (0)
- ESCO (0)
- ISHIHASHI (0)
- ASAHI TOOLS (0)
- FUKUDA (0)
- TOYO DRILL (0)
- KYOCERA (0)
- THE CUT (0)
- TWININGS (0)
- WIDIA (0)
- EIKOSHA (0)
- NGK SPARK PLUG (0)
Clear