Screw-Hole-Related Tools（work material：Steel casting (SC)）

?* Information on days to ship and prices

• • Promotional pricing

  

  Taper Tap Series for Pipes General Applications TPT

  OSG

  For use when machining tapered female threads for pipes. Long threaded type used primarily for connecting pipe-shaped items

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  For Tapered Screw for Pipe (Short Screw Type Spiral) SP-S-PT

  YAMAWA MFG

  A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	39.87 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Hand Tap HT (Cutting Tap)

  YAMAWA MFG

  Hand tap used for general tapping work.
  [Features]
  ・ High blade tip strength makes it easy for regrinding.
  ・ More suitable for manual work compared to taps of other shapes.
  ・ 2 types are available, with 5P or 1.5P chamfered threads.
  ・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
  ・ Machining with mechanical machinery is also possible.
  ・ Has straight grooves out of consideration for cutting chip stow.
  ・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
  [Applications]
  ・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	18.10 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

  YAMAWA MFG

  Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  A Tap Series, Spiral Tap, A-SFT

  OSG

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Groove-Free Tap Series VP New Roll VP-NRT

  OSG

  Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

  • Volume Discount

  Select to compare

  Configure now
  Min. Shipping Days ：	6 Days

• 

  Carbide Hand Tap

  MISUMI

  [Features]
  -Hand taps made from uncoated carbide
  -Can be used for both blind holes and through holes
  -Suitable for mass production of taps for various cast irons.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	34.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  A Tap Series Point Tap Long Shank A-LT-POT

  OSG

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

  Select to compare

  Configure now
  Starting from∗ ：	23.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand Tap - Metric Fine Thread Screw

  SKC

  [Features]
  It can be used for engraving thread grooves of fine threads.
  [Features]
  For right-hand threads.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	66.20 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  A Tap Series, Spiral Tap, Long Shank A-LT-SFT

  OSG

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Select to compare

  Configure now
  Starting from∗ ：	24.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spiral Tap Series, V Coated, V-SFT

  OSG

  Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.63 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters

  CARMEX

  For both internal and external threading
  
  [Features]
  · Ultrafine particle carbide and new type three-layer PVD coating

  Select to compare

  Configure now
  Starting from∗ ：	208.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】

  MISUMI

  [Features]
  -Can be used for through hole machining
  -Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.
  -Excellent abrasion resistance and resistance to chip welding due to TiN coating
  -Long shank, ideal for drilling deep tapped holes (G-LS-POT).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High-Speed Steel Hand Tap【10 Pieces Per Package】

  MISUMI

  [Features]
  A general purpose hand tap made from uncoated high speed steel
  High versatility, suitable for a wide range of applications and materials such as aluminium and general steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	34.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Spiral Fluted SFT-TPT

  OSG

  It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.

  Select to compare

  Configure now
  Starting from∗ ：	24.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap for Nickel Base Alloy ZEN-B

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole PG

  CARMEX

  For both internal and external diameters.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	390.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS Coated Carbide Threading Cutter, for Internal Metric Threads

  MISUMI

  [Features]
  --Tungsten carbide thread cutter for stable high speed machining
  -Can be used for both blind holes and through holes
  -
  -It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	181.83 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

  OSG

  The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	101.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Planet Cutter Series NC-Planet Cutters WX-PNC

  OSG

  Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	158.30 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC

  OSG

  By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.

  Select to compare

  Configure now
  Starting from∗ ：	165.90 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Point Tap Series, General Homo Treatment, EX-H-POT

  OSG

  Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.22 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

  OSG

  Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

  Select to compare

  Configure now
  Starting from∗ ：	24.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hand Tap Set (for metric screws / HSS-E)

  TRUSCO NAKAYAMA

  [Characteristics]
  Can be used for both through holes and blind holes.
  High-speed steel (HSS-E) tap set.
  Work materials: general steel, low to medium carbon steel, alloy steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	33.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Short Spiral Tap for Deep Holes S-SP

  YAMAWA MFG

  Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Solid Tapered End Mill

  CARMEX

  [Features]
  · Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
  · Increases the service life of solid carbide type mill threads or mill thread tips.
  · Equal and proper load will be applied to the cutting edge of the mill thread cutter.
  · By applying taper shape pre-processing, the machining time of the mill thread is shortened

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	119.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

  MISUMI

  Threading cutters that enable the high-speed stable processing are available at special prices

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	112.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

  MISUMI

  The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	222.23 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

  MISUMI

  [Features]
  -Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
  -Reduced cutting load due to short flute length (3 webs)
  -Enables effective thread cutting right into the corners of blind holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	181.78 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Carbide Spiral Tap

  MISUMI

  [Features]
  -Carbide tap with uncoated spiral flute
  -Can be used for machining blind holes
  -Suitable for mass production of aluminium and copper alloys

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	34.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】

  MISUMI

  The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  MT Series High-Speed Steel Spiral Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
  The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
  [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MT Series High-Speed Steel Point Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
  The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
  [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hand Tap Series, Tin Coated, TIN-HT

  OSG

  Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.26 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Point Tap Series, for Difficult-to-Machine Material, CPM-POT

  OSG

  Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.49 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Groove-Free Tap Series, Tin Coated, TIN-NRT

  OSG

  Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  A Tap Series for Pipes Point Tap A-POT

  OSG

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap for Titanium Alloy ZET-B

  YAMAWA MFG

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Plus Series Point Tap +PO (N+PO)

  YAMAWA MFG

  * N+SP will be replaced with +SP as soon as there is no more in stock.

  Select to compare

  Configure now
  Starting from∗ ：	11.11 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Long Shank Spiral Tap LS-SP(LS-N-SP)

  YAMAWA MFG

  * LS-N-SP will switch to LS-SP as soon as the stock runs out.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	25.00 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread G (55°)

  CARMEX

  Threading can be performed for both internal and external threads with a single pass.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mill Thread G (55°) Solid Carbide with Oil Hole

  CARMEX

  Whitworth screw, I.D./O.D. common type.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTZ Jet Mill Thread with Oil Hole ISO

  CARMEX

  For metric I.D. thread.
  
  [Features]
  · New type of carbide solid mill thread with oil holes inside the spiral groove.
  · Efficiently conveys cooling fluid to the cutting edge for smoother machining.
  · Especially effective with through holes.
  · Effective for cutting powder removal.
  · Also suitable for machinery that does not include an external lubricating device.

  Select to compare

  Configure now
  Starting from∗ ：	263.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads

  CARMEX

  For internally threaded metric screws.
  
  [Features]
  · For thread cutting deep, large diameter holes.
  · With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
  · Stable processing without causing chatter is possible.
  · Deep hole drilling can be performed with one pass.
  · Blade length is shorter, so cutting resistance decreases.
  · Able to thread long blade lengths of up to 3D

  Select to compare

  Configure now
  Starting from∗ ：	349.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini Mill Thread G55°

  CARMEX

  For both G (55°) inner and outer diameter thread (MT7).
  
  [Features]
  · Mini mill thread is a carbide solid mill thread developed for threading the inside diameter of very small holes.
  · Achieves phenomenal performance due to its highly precise blade shape and multiple-layer titanium aluminum nitride coated high performance ultrafine particle carbide (MT7).
  · Small diameter threading from M1 x 0.25 (pilot hole diameter φ0.75 mm) is possible.
  · Because high-speed cutting can be performed, machining time is shortened.
  · The blade length is short (3 ridges), so cutting load is not applied.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · Enables thread cutting of difficult-to-cut and high hardness materials.

  Select to compare

  Configure now
  Starting from∗ ：	211.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...