Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování
  • Outer Diameter(mm)
    [4–20/0.5mm jednotek]
    [21–50/1mm jednotek]
  • Internal Diameter(mm)
    [3–48/0.5mm jednotek]
  • Thickness and length
      [10–100/0.5]
    • Material
    • Material Detail
    • CAD
    • Odhadované dodací dny
      • Vše
      • V rámci 6 pracovních dnů

    Plastic sleeves / POM / MC nylon / Bakelite / PEEK / GFK

    Pozor

    • Resin is a material that can be easily distorted, expanded or contracted due to temperature and humidity. Please take this into consideration when designing dimensions and storing.(Click here for material properties.)
    • Please check the content on our website as the PDF does not contain the most up-to-date information.

    Číslo dílu:

    Nebyly nalezeny žádné nevyřízené. 17 návrhy.
    Množství:

    Obrysový výkres a tabulka specifikací

    Back to the Category Plastic Washers/Plastic Sleeves

    Technical Drawing - Plastic Washers

    Resin Collars/POM/MC Nylon/Bakelite/PEEK/Epoxy Glass:Related Image
    When D ≥ 30 for CLJB, FCLJB, CLJN, FCLJN, CLJE and FCLJE, the D dimension tolerance will be 0/-0.3.
    Open the technical drawing in the new window

    Available dimensions and tolerances can be found under the tab More information.

    Basic Properties (e.g., material, hardness, coating, tolerance) - Plastic Washers

    Dimension SelectableDimension ConfigurableMaterialColor
    CLJJFCLJJPolyacetalWhite
    CLJKFCLJKBlack
    CLJMFCLJMMC NylonBlue
    CLJWFCLJWStandard GradeIvory
    CLJDFCLJDMC NylonCDR2Black
    CLJTFCLJTConductive GradeCDR6
    CLJBFCLJBBakelitePaper BaseNatural Color
    CLJNFCLJNCloth BaseNatural Color
    CLJFFCLJFFluororesin White
    CLJPFCLJPPEEK Gray
    CLJEFCLJEEpoxy Glass Green
    Material Properties >>P.141

    Further specifications can be found under the tab More information.

    Composition of a Product Code - Plastic Washers

    Part Number-D-L
    CLJJ10-16-20.0
    Part Number-V-D-L
    FCLJB-V20-D30-L18.5

    Alterations - Plastic Washers

    Resin Collars/POM/MC Nylon/Bakelite/PEEK/Epoxy Glass:Related Image

    Seznam čísel dílů

    Počet položek

    Outer Diameter

    (mm)

    Internal Diameter

    (mm)

    Thickness and length

    Material

    Material Detail

    Dimension Selecting Method

    Tapping Coarse Thread Dia. Selection [VM]

    (mm)

    Tapping Fine Thread Dia. Selection [VMA]

    (mm)

    RoHS?Minimální objednací množství
    4 - 12
    2
    10 - 30
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    5 - 12
    3
    10 - 30
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    6 - 20
    4
    10 - 50
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    8 - 20
    5
    10 - 50
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    8 - 25
    6
    10 - 50
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    10 - 30
    8
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    12 - 50
    10
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    15 - 50
    12
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    20 - 60
    15
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    20 - 60
    16
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    25 - 50
    20
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    30 - 50
    25
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    40 - 50
    30
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Selectable
    -
    -
    10
    1 kusů
    4 - 20
    0 - 2.6
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Configurable Type
    -
    -
    10
    1 kusů
    21 - 50
    0 - 2.6
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Configurable Type
    -
    -
    10
    1 kusů
    4 - 20
    3 - 48
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Configurable Type
    -
    -
    10
    1 kusů
    21 - 50
    3 - 48
    10 - 100
    Epoxy Glass
    Epoxy Glass
    Dimension Configurable Type
    -
    -
    10
    1 kusů
    Jednotková cena (bez DPH)(Jednotková cena včetně DPH)
    Standardní datum odeslání
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů
    -
    (
    -
    )
    6 pracovních dnů

    Podrobné údaje

    Základní informace

    Resin collars that can be used as spacers.

    Pozor

    • Resin is a material that can be easily distorted, expanded or contracted due to temperature and humidity. Please take this into consideration when designing dimensions and storing.(Click here for material properties.)
    • Please check the content on our website as the PDF does not contain the most up-to-date information.

    Náčrt a specifikace

    Back to the Category Plastic Washers/Plastic Sleeves

    Technical Drawing - Plastic Washers

    Resin Collars/POM/MC Nylon/Bakelite/PEEK/Epoxy Glass:Related Image
    When D ≥ 30 for CLJB, FCLJB, CLJN, FCLJN, CLJE and FCLJE, the D dimension tolerance will be 0/-0.3.
    Open the technical drawing in the new window

    Specification Tables - Plastic Washers

    ■Dimension Selectable
    Part NumberDLUnit Price
    TypeVSelection0.5mm IncrementCLJJ CLJKCLJM CLJWCLJDCLJBCLJNCLJTCLJFCLJPCLJE
    CLJJ
    CLJK
    CLJM
    CLJW
    CLJD
    CLJT
    CLJB
    CLJN
    CLJF
    CLJP
    CLJE
    2(4)568101112       (4)V2 only10.0~25.0         
    3       25.5~30.0         
    4  (6)81011121314151620  (6)V4 only10.0~25.0         
    5    25.5~50.0         
    6   8101112131415162025     10.0~25.0         
            25.5~50.0         
    8    10111213141516202530    10.0~25.0         
            25.5~50.0         
            50.5~75.0         
            75.5~100.0         
    10      1213141516202530    10.0~25.0         
          25.5~50.0         
          50.5~75.0         
          75.5~100.0         
                  354050 10.0~25.0         
                   25.5~50.0         
                   50.5~75.0         
                   75.5~100.0         
    12         1516202530    10.0~25.0         
           25.5~50.0         
           50.5~75.0         
           75.5~100.0         
                  354050 10.0~25.0         
                   25.5~50.0         
                   50.5~75.0         
                   75.5~100.0         
                202530    10.0~25.0         
                25.5~50.0         
                50.5~75.0         
                75.5~100.0         
    15              354050 10.0~25.0         
                25.5~50.0         
                50.5~75.0         
    16           75.5~100.0         
                      6010.0~25.0     ----
                      25.5~50.0     
                      50.5~75.0     
                      75.5~100.0     
                (25)30(25)V20 only10.0~25.0         
                25.5~50.0         
                50.5~75.0         
                75.5~100.0         
    20              354050 10.0~25.0         
                 25.5~50.0         
                 50.5~75.0         
    25            75.5~100.0         
                      6010.0~25.0     ----
                      25.5~50.0     
                      50.5~75.0     
                      75.5~100.0     
    30               4050 10.0~25.0         
                    25.5~50.0         
                    50.5~75.0         
                    75.5~100.0         
                     6010.0~25.0     ----
                  25.5~50.0     
                  50.5~75.0     
                  75.5~100.0     
    No specification available for those without value.
    ■Dimension Configurable
    Part NumberVDLUnit Price
    V2.6 or Less SelectionD4 ~ 20: 0.5mm Increment0.5mm IncrementFCLJJ FCLJKFCLJM FCLJWFCLJDFCLJBFCLJNFCLJT FCLJFFCLJPFCLJE
    V3.0 or More: 0.5mm IncrementD21 or More: 1mm Increment
    FCLJJ
    FCLJK
    FCLJM
    FCLJW
    FCLJD
    FCLJT
    FCLJB
    FCLJN
    FCLJF
    FCLJP
    FCLJE
     4.0~1010.0~ 25.0         
     (0.5mm Increment)25.5~ 50.0         
     D≤5L≤5050.5~ 75.0         
    075.5~100.0         
    (No Hole Machining)10.5~20
    (0.5mm Increment)
    10.0~ 25.0         
     25.5~ 50.0         
     50.5~ 75.0         
    2.075.5~100.0         
     21~30
    (1mm Increment)
    10.0~ 25.0         
    2.625.5~ 50.0         
     50.5~ 75.0         
     75.5~100.0         
    3.0~55.031~40
    (1mm Increment)
    10.0~ 25.0         
    (0.5mm Increment)25.5~ 50.0         
     50.5~ 75.0         
    L≤ 50.075.5~100.0         
    V≤D-241~50
    (1mm Increment)
    10.0~ 25.0         
     25.5~ 50.0         
    L≥ 50.550.5~ 75.0         
    V≤D-675.5~100.0         
     51~60
    (1mm Increment)
    10.0~ 25.0     ----
     25.5~ 50.0     
     50.5~ 75.0     
     75.5~100.0     
     61~80
    (1mm Increment)
    10.0~ 25.0     ----
    025.5~ 50.0     
    (No Hole Machining)50.5~ 75.0     
     75.5~100.0     
    3.0~90.081~100
    (1mm Increment)
    10.0~ 25.0     ----
    (0.5mm Increment)25.5~ 50.0     
    V≤D-650.5~ 75.0     
     75.5~100.0     
      Machining Conditions L ≤Vx8   No specification available for those without value.

    Alterations - Plastic Washers

    Resin Collars/POM/MC Nylon/Bakelite/PEEK/Epoxy Glass:Related Image

    General Information - Plastic Washers

     

    Selection details of plastic washers/plastic sleeves

    - Material: MC-nylon, polyacetal (POM), Bakelit, epoxy glass, polyether ether ketone (PEEK), fluoroplastic, polyslider, ceramic, polycarbonate (PC), polyamide (PA), polytetrafluoroethylene (PTFE), Duracon, Duranex, ABS, glass (lime-sodium glass)

    - Outer diameter: 2 to 100 mm

    - Inner diameter: 1 to 90 mm

    - Thickness, length: 0.1 to 500 mm

    - Forms: cylindrical, with collar, with pins, with countersunk bore, with guide, square washers

     

    Description/Basics of plastic washers/plastic sleeves

    Sleeves in general, are among the most commonly used machine elements to create a distance between two components. Plastic sleeves and ceramic sleeves offer added value compared to conventional metal collars.

    Plastic sleeves and plastic sleeves with a collar have some advantages over their metallic counterparts. In addition to creating and maintaining a distance, they also have an insulating effect. The insulation effect refers to thermal insulation or electrical insulation depending on the material. In addition, their similarity to natural materials is greater than with metal sleeves. As a result, plastic washers and plastic sleeves (depending on the material) expand to the same extent under the influence of heat, such as wood or similar soft materials.

    Plastic washers, as well as washers, enable an increase in surface compression. However, their resistance to pressure loads is lower depending on the material selected than that of a similarly large metal washer. For this purpose, the advantage of thermal and electrical insulation effects exists in plastic washers.

    MISUMI also offers plastic washers and plastic sleeves with gliding properties. For example, washers and sleeves made of fluoroplastics are suitable for reducing friction resistances in hinge constructions. It should be noted that plastic sleeves do not replace plain bearings.

    Polyether ether ketone (PEEK) has excellent thermal insulating properties. Depending on the strength and material composition, PEEK has a melting point of up to 300°C. It is therefore suitable, among other things, for insulating heating and cooling lines, for example. Due to the quality of the surface, the material has particularly good adhesive properties.

    Polyacetal, also called POM, is characterized by its very good machinability and excellent mechanical properties. Polyacetal (POM) products are widely used in various branches of mechanical engineering.

    At MISUMI you will find washers and sleeves made of various variants of MC Nylon. In addition to the standard version, a conductive and antistatic type is also offered. Thus, MC Nylon can be used in a wide variety of applications.

    The different versions and shapes of the plastic washers and plastic sleeves allow utilising them in a wide variety of applications. Thus, plastic washers can be used, for example, as bearing mountings up to the assembly of printed circuit boards.

     

    Application Examples

    Plastic sleeve as thermally insulating spacer sleeve
    (1) Plastic sleeves, (2) Cylindrical plastic sleeve, (3) Plastic washer, (4) Hexagon socket screws, (5) Washer, (6) Hexagon nut

    Plastic sleeve as bearing ring
    (1) Plastic sleeve with guide, (2) Rotary shaft, (3) Timing pulley, (4) Ball bearing (5) Bearing with housing, (6) Drive wheel