Plates / PUR / Ether, Ester / A50, A70, A90, A95 / through holes / oil-resistant adhesive layer (Part Numbers - CAD Download)

View the FAQ (5)

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Urethane&Rubber Sheets with Oil-Resistant Adhesives:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)

Type		Material	Hardness	Color	Adhesive Surface
A, B Selectable Type	A, B Configurable Type
NTUS	NTUSF	Ether Type Polyurethane	Shore A95	Natural Color	Special Acrylic Adhesive
NTUH	NTUHF		Shore A90
NTUM	NTUMF	Ester Type Polyurethane	Shore A70
NTUL	NTULF		Shore A50

Properties Here
Equiv. to the urethane of the similar hardness.

■Adhesive Strength (180 Degree Peel Strength)

Item		Special Acrylic Adhesive	General Acrylic Adhesive (Reference Values)
Adhesive Strength (N)	Ordinary Condition	11	11
Adhesive Strength (N)	* Oiled Surface	9	3

* Oiled Surface: Salad oil is coated on stainless steel plate using absorbent cotton, and measurement is taken after 2 hours.
Testing Method: 180° Peeling Test (25µm thick and 25mm wide PET film bonded to EN 1.4301 Equiv. plate)

Further specifications can be found under the tab More information.

Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)

Part Number	-	A	-	B	-	F	-	G	-	N
NTUS3 NTUH3 NTUSF4H2	- - -	300 100 150	- - -	100 100 100	-	F140	-	G40	-	N3

Alterations - Panels (polyurethane rubber, rubber, foam, felt)

General Information - Panels (polyurethane rubber, rubber, foam, felt)

Selection details of panels (polyurethane rubber, rubber, foam, felt)

- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam

- Thickness (mm): 0.5 to 50

- Width (mm): 3 to 500

- Length (mm): 10 to 2000

Description/Basics

Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.

In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.

Additional properties on foam panels and rubber plates can be found in the Properties PDF.

MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.

Application Examples - Panels (polyurethane rubber, rubber, foam, felt)

Application example
(1) Low-friction rubber plate (2) belt conveyor

Application example
(1) Vibration damping plate

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
NTUH1-[100,200,300,400,500]-[100,200,300,400,500]
NTUH2-[100,200,300,400,500]-[100,200,300,400,500]
NTUH3-[100,200,300,400,500]-[100,200,300,400,500]
NTUHF1-[10-500/1]-[10-500/1]
NTUHF1H1-[10-500/1]-[10-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10]
NTUHF1H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUHF1H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUHF2-[10-500/1]-[10-500/1]
NTUHF2H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10]
NTUHF2H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUHF2H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUHF3-[10-500/1]-[10-500/1]
NTUHF3H1-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTUHF3H2-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTUHF3H3-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTUHF4H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUHF4H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUHF4H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUHF6H1-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTUHF6H2-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTUHF6H3-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTUL1-[100,200,300,400,500]-[100,200,300,400,500]
NTUL2-[100,200,300,400,500]-[100,200,300,400,500]
NTUL3-[100,200,300,400,500]-[100,200,300,400,500]
NTULF1-[10-500/1]-[10-500/1]
NTULF1H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTULF1H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTULF1H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTULF2-[10-500/1]-[10-500/1]
NTULF2H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTULF2H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10]
NTULF2H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTULF3-[10-500/1]-[10-500/1]
NTULF3H1-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTULF3H2-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTULF3H3-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTULF4H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTULF4H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTULF4H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTULF6H1-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTULF6H2-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTULF6H3-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTUM1-[100,200,300,400,500]-[100,200,300,400,500]
NTUM2-[100,200,300,400,500]-[100,200,300,400,500]
NTUM3-[100,200,300,400,500]-[100,200,300,400,500]
NTUMF1-[10-500/1]-[10-500/1]
NTUMF1H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUMF1H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUMF1H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUMF2-[10-500/1]-[10-500/1]
NTUMF2H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUMF2H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10]
NTUMF2H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10]
NTUMF3-[10-500/1]-[10-500/1]
NTUMF3H1-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTUMF3H2-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTUMF3H3-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10]
NTUMF4H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUMF4H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]
NTUMF4H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,4,5,6,8,10]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Grade, Type	Thickness T (mm)	Width A (mm)	Length B (mm)	Hardness (Shore, Asker, Penetration)	Specifications	Hole Machining	F (mm)	G (mm)	Through Hole Nominal Dia. [N]
-	1	7 Days	[Standard Urethane] Ether Polyurethane	1	100 ～ 500	100 ～ 500	Shore A90	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ether Polyurethane	2	100 ～ 500	100 ～ 500	Shore A90	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ether Polyurethane	3	100 ～ 500	100 ～ 500	Shore A90	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ether Polyurethane	1	10 ～ 500	10 ～ 500	Shore A90	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ether Polyurethane	1	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	1H (1-Hole)	5 ～ 491	5 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	2	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	1H (1-Hole)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	3	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	1H (1-Hole)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	2	10 ～ 500	10 ～ 500	Shore A90	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ether Polyurethane	1	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	2H (Two Holes)	9 ～ 491	5 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	2	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	2H (Two Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	3	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	2H (Two Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	3	10 ～ 500	10 ～ 500	Shore A90	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ether Polyurethane	1	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	3H (Three Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	2	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	3H (Three Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	3	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	3H (Three Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	1	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	4H (Four Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	2	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	4H (Four Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	3	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	4H (Four Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	1	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	6H (Six Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	2	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	6H (Six Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ether Polyurethane	3	10 ～ 500	10 ～ 500	Shore A90	With Machined Hole Type	6H (Six Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	100 ～ 500	100 ～ 500	Shore A50	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	100 ～ 500	100 ～ 500	Shore A50	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	100 ～ 500	100 ～ 500	Shore A50	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A50	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	1H (1-Hole)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	1H (1-Hole)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	1H (1-Hole)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A50	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	2H (Two Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	2H (Two Holes)	9 ～ 491	5 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	2H (Two Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A50	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	3H (Three Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	3H (Three Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	3H (Three Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	4H (Four Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	4H (Four Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	4H (Four Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	6H (Six Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	6H (Six Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A50	With Machined Hole Type	6H (Six Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	100 ～ 500	100 ～ 500	Shore A70	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	100 ～ 500	100 ～ 500	Shore A70	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	100 ～ 500	100 ～ 500	Shore A70	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A70	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	1H (1-Hole)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	1H (1-Hole)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	1H (1-Hole)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A70	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	2H (Two Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	2H (Two Holes)	9 ～ 491	5 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	2H (Two Holes)	9 ～ 491	5 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A70	Standard Type	No Drilling Alteration	-	-	-
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	3H (Three Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	3H (Three Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	3H (Three Holes)	9 ～ 245	9 ～ 491	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	1	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	4H (Four Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	2	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	4H (Four Holes)	9 ～ 491	9 ～ 495	3 ～ 10
-	1	7 Days	[Standard Urethane] Ester Polyurethane	3	10 ～ 500	10 ～ 500	Shore A70	With Machined Hole Type	4H (Four Holes)	9 ～ 491	9 ～ 495	3 ～ 10

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Open the technical drawing in the new window

Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)

■ A, B Selectable - Standard Type

Part Number		Selection
Type	T	A	B
NTUS NTUH NTUM NTUL	1	100 200 300 400 500	100 200 300 400 500
	2
	3

■ A, B Configurable - Standard / Hole Type

Part Number			1mm Increment (A≥B)		0.5mm Increment		N
Type	Nominal	T	A	B	F	G
NTUSF NTUHF NTUMF NTULF	1H 2H 3H 4H 6H	1	10~500	10~500	5~495 (1H Type) 9~491 (2H, 4H Types) 9~245 (3H, 6H Types)	5~495 (1H, 2H, 4H Types) 9~491 (3H, 6H Types)	3 4 5 6 8 10
		2
		3

Dimension F Specification Range: For 1H: d/2+2.5≤F≤A-d/2-2.5, for 2H, 4H: d+5≤F≤A-d-5, for 3H, 6H: d+5≤F≤A/2-d/2-2.5.
Dimension G Specification Range: For 1H, 2H, 3H: d/2+2.5≤G≤B-d/2-2.5, for 4H, 6H: d+5≤G≤B-d-5.
The upper limits of A and B are different between A, B Selectable Type and A, B Configurable Type.

Alterations - Panels (polyurethane rubber, rubber, foam, felt)

Products homepage

Basic information

Material	Urethane	With or w/o Adhesive	Adhesive

Configure

84Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Grade, Type
- Standard Urethane
  - Ester Polyurethane
  - Ether Polyurethane
Clear
Thickness T(mm)
1

2

3
Clear
Width A(mm)
100

200

300

400

500
[10-500/1mm Unit(s)]
Clear
Length B(mm)
100

200

300

400

500
[10-500/1mm Unit(s)]
Clear
Hardness (Shore, Asker, Penetration)
Shore A50

Shore A70

Shore A90

Shore A95
Clear
Specifications
Standard Type

With Machined Hole Type
Clear
Hole Machining
- 1H (1-Hole)
- 2H (Two Holes)
- 3H (Three Holes)
- 4H (Four Holes)
- 6H (Six Holes)
- No Drilling Alteration
Clear
F(mm)
[5-491/0.5mm Unit(s)]
Clear
G(mm)
[5-495/0.5mm Unit(s)]
Clear
Through Hole Nominal Dia. [N]
3

4

5

6

8

10
Clear
Type
- NTUH
- NTUHF
- NTUL
- NTULF
- NTUM
- NTUMF
- NTUS
- NTUSF
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
How can you attach a rubber plate?: Answer:
A rubber plate can be attached with double-adhesive tape. MISUMI offers rubber plates with configurable through holes or counterbores with adhesive tape.
Question:
Do you have screw-on rubber panels?: Answer:
MISUMI offers rubber plates that can be screwed on via a through hole or counterbore. The rubber plates with counterbores are well suited for applications that need to form a flat surface.
Question:
Is NBR oil-resistant?: Answer:
The NBR rubber is oil-resistant and is often used as a sealing material for rubber or foam. In addition, NBR has good thermal resistance, which in combination with high abrasion resistance is the best suited NBR material for seals.
Question:
Which material reduces vibrations well?: Answer:
Silicone gel vibration dampers reduce vibrations well. This elastic material reduces the transmission of vibrations to the subsequent component and also contributes to the acoustics.
Question:
What is Vulkollan?: Answer:
Vulkollan is a highly abrasion-resistant polyurethane rubber that has high wear resistance. It is one of the high-performance rubbers that has little pressure deformation and can withstand high impact forces. In addition, Vulkollan has a high tear strength. However, over time Vulkollan may change its colour, but without losing its mechanical properties.