Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování
  • Outer Diameter (D)(φ)
  • R Size(mm)
  • Work Material
  • Flute Length (ℓ)(mm)
  • Number of Flutes(sheet)
  • Overall Length (L)(mm)
  • Shank Diameter (d)(mm)
  • Length Under Neck (ℓ1)(mm)
  • Processing Applications
  • R Precision(μm)
  • Additional Classification
  • #6
      [13–38/1]
    • Odhadované dodací dny
      • Vše
      • V rámci 5 pracovních dnů
      • V rámci 8 pracovních dnů

    TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model

    TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model

    Přesunutím myši nad obrázek ho zvětšíte

    • TSC-CR-HEM3LB
    • LN-TSC-CR-HEM3S

    Číslo dílu:

    Nebyly nalezeny žádné nevyřízené. 40 návrhy.
    Množství:

    Obrysový výkres

    TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model:Related Image

    Seznam čísel dílů

    Počet položek

    Outer Diameter (D)

    (φ)

    R Size

    (mm)

    Work Material

    Flute Length (ℓ)

    (mm)

    Number of Flutes

    (sheet)

    Overall Length (L)

    (mm)

    Shank Diameter (d)

    (mm)

    Length Under Neck (ℓ1)

    (mm)

    Processing Applications

    R Precision

    (μm)

    Additional Classification

    #6

    Figure

    Under Neck Diameter d1

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 30'

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 1°

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 2°

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 3°

    (mm)

    Minimální objednací množství
    3
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    45
    6
    -
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.01
    Manufactured Product
    13 - 36
    2
    2.9
    -
    -
    -
    -
    1 kusů
    3
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    -
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.01
    Manufactured Product
    13 - 36
    2
    2.9
    -
    -
    -
    -
    1 kusů
    4
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    4
    70
    6
    -
    Flat Surface / Side Surface / Curved Surface / Inclined Cutting
    ±0.01
    Manufactured Product
    16 - 38
    2
    3.8
    -
    -
    -
    -
    1 kusů
    4
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    4
    70
    6
    -
    Flat Surface / Side Surface / Curved Surface / Inclined Cutting
    ±0.01
    Manufactured Product
    16 - 38
    2
    3.8
    -
    -
    -
    -
    1 kusů
    1
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    0.8
    3
    50
    4
    6
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    0.95
    6.28
    6.59
    7.32
    8.24
    1 kusů
    1
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    0.8
    3
    50
    4
    6
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    0.95
    6.28
    6.59
    7.32
    8.24
    1 kusů
    1
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    0.8
    3
    50
    4
    8
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    0.95
    8.38
    8.79
    9.76
    10.98
    1 kusů
    1
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    0.8
    3
    50
    4
    8
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    0.95
    8.38
    8.79
    9.76
    10.98
    1 kusů
    1
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    0.8
    3
    50
    4
    12
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    0.95
    12.57
    13.19
    14.65
    16.48
    1 kusů
    1.5
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.2
    3
    50
    4
    6
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.45
    6.28
    6.59
    7.32
    8.24
    1 kusů
    1.5
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.2
    3
    50
    4
    6
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.45
    6.28
    6.59
    7.32
    8.24
    1 kusů
    1.5
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.2
    3
    50
    4
    8
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.45
    8.38
    8.79
    9.76
    10.98
    1 kusů
    1.5
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.2
    3
    50
    4
    8
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.45
    8.38
    8.79
    9.76
    10.98
    1 kusů
    1.5
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.2
    3
    50
    4
    12
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.45
    12.57
    13.19
    14.65
    16.48
    1 kusů
    2
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    10
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    10.47
    10.99
    12.21
    13.73
    1 kusů
    2
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    10
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    10.47
    10.99
    12.21
    13.73
    1 kusů
    2
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    12
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    12.57
    13.19
    14.65
    16.48
    1 kusů
    2
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    14
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    14.66
    15.39
    17.09
    19.22
    1 kusů
    2
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    14
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    14.66
    15.39
    17.09
    19.22
    1 kusů
    2
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    16.75
    17.58
    19.53
    Without Interference
    1 kusů
    2
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    70
    4
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    20.94
    21.98
    24.41
    Without Interference
    1 kusů
    2.5
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2
    3
    70
    4
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.4
    16.75
    17.58
    19.53
    Without Interference
    1 kusů
    2.5
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2
    3
    70
    4
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.4
    16.75
    17.58
    19.53
    Without Interference
    1 kusů
    2.5
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2
    3
    70
    4
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.4
    31.41
    32.97
    Without Interference
    Without Interference
    1 kusů
    2.5
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2
    3
    70
    4
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.4
    31.41
    32.97
    Without Interference
    Without Interference
    1 kusů
    3
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    16.75
    17.58
    19.53
    21.97
    1 kusů
    3
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    16.75
    17.58
    19.53
    21.97
    1 kusů
    3
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    20.94
    21.98
    24.41
    27.46
    1 kusů
    3
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    20.94
    21.98
    24.41
    27.46
    1 kusů
    3
    1
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    20.94
    21.98
    24.41
    27.46
    1 kusů
    3
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    31.41
    32.97
    36.62
    Without Interference
    1 kusů
    3
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    31.41
    32.97
    36.62
    Without Interference
    1 kusů
    4
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    16.75
    17.58
    19.53
    Without Interference
    1 kusů
    4
    1
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    16.75
    17.58
    19.53
    Without Interference
    1 kusů
    4
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    20.94
    21.98
    24.41
    Without Interference
    1 kusů
    4
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    20.94
    21.98
    24.41
    Without Interference
    1 kusů
    4
    1
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    20.94
    21.98
    24.41
    Without Interference
    1 kusů
    4
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    31.41
    32.97
    Without Interference
    Without Interference
    1 kusů
    4
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    31.41
    32.97
    Without Interference
    Without Interference
    1 kusů
    4
    1
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    31.41
    32.97
    Without Interference
    Without Interference
    1 kusů
    Jednotková cena (bez DPH)(Jednotková cena včetně DPH)
    Standardní datum odeslání
    -
    (
    -
    )
    8 pracovních dnů
    -
    (
    -
    )
    8 pracovních dnů
    -
    (
    -
    )
    8 pracovních dnů
    -
    (
    -
    )
    8 pracovních dnů
    60.76 €
    (
    72.30 €
    )
    5 pracovních dnů
    80.02 €
    (
    95.22 €
    )
    5 pracovních dnů
    80.02 €
    (
    95.22 €
    )
    5 pracovních dnů
    60.76 €
    (
    72.30 €
    )
    5 pracovních dnů
    80.02 €
    (
    95.22 €
    )
    5 pracovních dnů
    77.65 €
    (
    92.40 €
    )
    5 pracovních dnů
    82.65 €
    (
    98.35 €
    )
    5 pracovních dnů
    77.65 €
    (
    92.40 €
    )
    5 pracovních dnů
    82.65 €
    (
    98.35 €
    )
    5 pracovních dnů
    82.65 €
    (
    98.35 €
    )
    5 pracovních dnů
    78.87 €
    (
    93.86 €
    )
    5 pracovních dnů
    85.59 €
    (
    101.85 €
    )
    5 pracovních dnů
    85.59 €
    (
    101.85 €
    )
    5 pracovních dnů
    88.15 €
    (
    104.90 €
    )
    5 pracovních dnů
    88.15 €
    (
    104.90 €
    )
    5 pracovních dnů
    85.59 €
    (
    101.85 €
    )
    5 pracovních dnů
    85.59 €
    (
    101.85 €
    )
    5 pracovních dnů
    80.79 €
    (
    96.14 €
    )
    5 pracovních dnů
    64.60 €
    (
    76.87 €
    )
    5 pracovních dnů
    70.51 €
    (
    83.91 €
    )
    5 pracovních dnů
    88.68 €
    (
    105.53 €
    )
    5 pracovních dnů
    77.16 €
    (
    91.82 €
    )
    5 pracovních dnů
    66.17 €
    (
    78.74 €
    )
    5 pracovních dnů
    87.97 €
    (
    104.68 €
    )
    5 pracovních dnů
    85.56 €
    (
    101.82 €
    )
    5 pracovních dnů
    87.28 €
    (
    103.86 €
    )
    5 pracovních dnů
    87.00 €
    (
    103.53 €
    )
    5 pracovních dnů
    87.00 €
    (
    103.53 €
    )
    5 pracovních dnů
    95.49 €
    (
    113.63 €
    )
    5 pracovních dnů
    99.44 €
    (
    118.33 €
    )
    5 pracovních dnů
    95.49 €
    (
    113.63 €
    )
    5 pracovních dnů
    95.49 €
    (
    113.63 €
    )
    5 pracovních dnů
    99.44 €
    (
    118.33 €
    )
    5 pracovních dnů
    94.71 €
    (
    112.70 €
    )
    5 pracovních dnů
    113.32 €
    (
    134.85 €
    )
    5 pracovních dnů
    104.43 €
    (
    124.27 €
    )
    5 pracovních dnů

    Podrobné údaje

    Základní informace

    [Features]
    -Multi-functional long neck radius with high feed rate and excellent durability
    -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
    -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

    Specifikace a cena

    Specifications

    TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model:Related Image

     Model Number
    TSC-CR-HEM3LB (Stocked Product) / LN-TSC-CR-HEM3S (Manufactured Product)

    Outer Diameter
    D
    Length Under Neck ℓ1
    (Manufactured products designated
    in 1 mm increment)
    Radius
    R
    Flute Length
    Under Neck Diameter
    d1
    Overall Length
    L
    Shank Diameter
    d
    Actual Effective Length Depends on Work Inclination Angle Figure ● Stocked Product
    □ Manufactured Product
    30'
    1 6 0.2 0.3 0.8 0.95 50 4 6.28 6.59 7.32 8.24 1
    8 8.38 8.79 9.76 10.98
    12 12.57 13.19 14.65 16.48
    1.5 6 0.2 0.3 1.2 1.45 50 4 6.28 6.59 7.32 8.24 1
    8 8.38 8.79 9.76 10.98
    12 12.57 13.19 14.65 16.48
    2 10 0.2 0.5 1.6 1.95 50 4 10.47 10.99 12.21 13.73 1
    12 12.57 13.19 14.65 16.48
    14 14.66 15.39 17.09 19.22
    16 16.75 17.58 19.53 Without Interference
    20 70 20.94 21.98 24.41 Without Interference
    2.5 16 0.2 0.5 2 2.4 70 4 16.75 17.58 19.53 Without Interference 1
    20 20.94 21.98 Without Interference Without Interference
    30 31.41 32.97 Without Interference Without Interference
    3 16 0.2 0.5 1 2.4 2.9 70 6 16.75 17.58 19.53 21.97 1
    20 20.94 21.98 24.41 27.46
    30 31.41 32.97 36.62 Without Interference
    13 ~ 36 0.3 0.5 8 60 - - - - 2
    4 16 0.2 0.5 1 3.2 3.8 70 6 16.75 17.58 19.53 Without Interference 1
    20 20.94 21.98 24.41 Without Interference
    30 31.41 32.97 Without Interference Without Interference
    16 ~ 38 0.3 0.5 11 60 - - - - 2

    [ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the points below differ when ordering a stocked product.
    (1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number. (3) The order for specifying the "length under neck" and "radius" is the opposite.

    For Cutting Conditions, Refer to >>Click here.

    Funkce a příklady používání

    More Information

    TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model:Related Image