Registrace
Podmínky filtrování
HALDER

Clamping Elements

Clamping Elements

Číslo dílu:

Nebyly nalezeny žádné nevyřízené. 2 návrhy.
Množství:

Informace o produktu

 

Example

Seznam čísel dílů

Počet položek
  • 1
    • Číslo dílu
    23370.0140
    23370.0145
    Související

    Material

    Type

    Type

    b1

    (mm)

    d3

    (mm)

    h1 max.

    (mm)

    h1 min.

    (mm)

    h2

    (mm)

    h3

    (mm)

    h4

    (mm)

    l

    (mm)

    l1

    (mm)

    l2

    (mm)

    l3

    (mm)

    l4

    (mm)

    WS

    (mm)

    Clamping force

    (kN)

    Stroke

    (mm)

    Location hole

    (mm)

    Clamp length

    (mm)

    Disc

    Body

    Spring

    Tightening torque

    (Nm)

    d1 [f7]

    (mm)

    d4 [n6]

    (mm)

    L1

    (mm)

    Bushing

    Clamping screw

    Weight

    (g)

    		RoHS?Minimální objednací množství

    Data sheet

    -
    -
    -
    33
    M10
    15
    0
    60
    40
    11
    -
    60.5
    43.5
    37
    90
    16
    7.5
    15
    35
    -
    Heat-treated steel, tempered, punched, mechanically trued / , phosphatized
    Case-hardened steel, case-hardened, blackened and ground
    Spring steel wire
    20
    25
    35
    41
    Case-hardened steel, case-hardened
    Heat-treated steel
    483
    -
    1 kusů

    Data sheet

    -
    -
    -
    33
    M10
    20
    10
    78
    58
    11
    -
    60.5
    43.5
    37
    110
    16
    7.5
    10
    35
    -
    Heat-treated steel, tempered, punched, mechanically trued / , phosphatized
    Case-hardened steel, case-hardened, blackened and ground
    Spring steel wire
    20
    25
    35
    49
    Case-hardened steel, case-hardened
    Heat-treated steel
    552
    -
    1 kusů
    Jednotková cena (bez DPH)(Jednotková cena včetně DPH)
    Standardní datum odeslání
    181.61 €
    ( 216.12 € )
    4 pracovních dnů
    181.61 €
    ( 216.12 € )
    4 pracovních dnů
  • 1

    • Podrobné údaje

    Základní informace

    Used as clamps in conventional fixtures. A reamed hole is provided in the body of the fixture. The hole depth has to be adapted to the desired clamping height. To provide a counter force, a support can be placed against the rounded end of the clamp (radius 22). This support can be flat, half-rounded or V-shaped. Clamping is achieved by means of a DIN 933 hexagon screw.