Spring-Action Side Thrust Pins 2214 (Part Numbers)
- Volume Discount
Material: Steel, black oxide finish. Ball: Stainless steel, hardened. Spring: Stainless steel.
Temperature range -30°C to +50°C.
Version B:
Material: Free cutting steel, burnished. Ball: Steel, hardened. Spring: Plastic.
Temperature range -40°C to +80°C.
Note:
The side thrust pin is pressed into the bore by at least as far as the measure l3. It serves to position, hold or clamp small workpieces inside fixtures. If the workpiece is machined, additional clamping devices might be required for holding it safely in place. If fixtures are stored please make sure that the plastic spring is not loaded.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Product data
- CAD data not available
Part Number
|
|---|
| 65492800 |
| 65493000 |
| 65493200 |
| 65493400 |
| 65495000 |
| 65495200 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Version | Outer diameter d1 (mm) | Ball diameter d2 (mm) | Total length l1 (mm) | Center distance ball area to head l2 (mm) | Length to flattening l3 (mm) | Spring travel of ball b (mm) | Overhang of ball s (mm) | Intake bore H8 (mm) | Spring load inital* F1 (N) | Spring load end* F2 (N) | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
15.70 € | 1 | Available | 4 Days | A | 8 | 3 | 25 | 3.6 | 6 | 3.2 | 0.9 | 8 | 2.5 | 6.5 | 8.7 | |
16.00 € | 1 | Available | 4 Days | A | 10 | 4 | 30 | 4.2 | 7 | 4 | 1 | 10 | 4.5 | 9 | 17 | |
16.32 € | 1 | Available | 4 Days | A | 12 | 5 | 35 | 4.8 | 9 | 5 | 1.5 | 12 | 6.5 | 13 | 29 | |
17.17 € | 1 | Available | 4 Days | A | 14 | 6.5 | 40 | 5.8 | 10 | 5.4 | 1.8 | 14 | 8 | 18 | 43 | |
26.70 € | 1 | Available | 4 Days | B | 10 | 5.5 | 30 | 7 | 8 | 4.5 | 1 | 10 | 50 | 160 | 8.6 | |
28.90 € | 1 | Available | 4 Days | B | 12 | 6.5 | 35 | 8 | 9 | 5.5 | 1.5 | 12 | 60 | 270 | 13 |
Loading...
Basic information
| Material | Steel / Stainless steel | Surface | Black oxide finish |
|---|
Configure
Basic Attributes
-
Version
- A
- B
-
Outer diameter d1(mm)
-
Ball diameter d2(mm)
-
Total length l1(mm)
-
Center distance ball area to head l2(mm)
- 3.6
- 4.2
- 4.8
- 5.8
- 7
- 8
-
Length to flattening l3(mm)
- 6
- 7
- 8
- 9
- 10
-
Spring travel of ball b(mm)
- 3.2
- 4
- 4.5
- 5
- 5.4
- 5.5
-
Overhang of ball s(mm)
-
Intake bore H8(mm)
- 8
- 10
- 12
- 14
-
Spring load inital* F1(N)
-
Spring load end* F2(N)
Filter by standard shipping days
-
- All
- 4 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.