MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-Z100S (Part Numbers)
Suitable for protruding and fillet welding (downward and lateral). Wire focused on middle plates (approximately 7 - 16 mm), combining the low slag of solid wire with the arc stability of DW wire.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
MX-Z100S-1.2-20
Basic information
| Product Type | Welding wire | Wire Diameter(mm) | 1.2 | JIS Standard | Z3313 T 49J 0 T1-0 C A-U |
|---|---|---|---|---|---|
| AWS Standard | A5.20 E70T-1C Applicable | Amount Of Content | 1 Box (20 kg) | Mass(g) | 20000 |
| Application and Usage Characteristic | Ideal for butt-jointing and fillet welding (downward, sideways). The wire places emphasis on the middle plate (approx. 7 - 16 mm), combining the low slag of solid wired and the arc stability of DW wire. | Chemical Composition of Deposited Metal C(%) | 0.05 | Chemical Composition of Deposited Metal Si(%) | 0.6 |
| Chemical Composition of Deposited Metal Mn(%) | 1.5 | Chemical Composition of Deposited Metal P(%) | 0.017 | Chemical Composition of Deposited Metal S(%) | 0.012 |
| Chemical Composition of Deposited Metal, Other | - | Example of Weld Metal Mechanical Properties 0.2% Proof Stress MPa | 500 | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | 560 |
| Mechanical Properties of Weld Metal Proof Stress, Elongation(%) | 28 | Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J) | 98 | Shield Gas | CO2 |
| Authorized by the Classification Society of Japan | - |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.