Registrace

Překládáme náš obchod do češtiny! 

Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Kategorie
Zobrazit další
Podmínky filtrování

Vymazat vše

  • Stock
  • Blade diameter (D)(φ)
  • R Size(mm)
    [0.1–3/0.1mm jednotek]
  • work material
  • Blade length (ℓ)(mm)
    [5–56/1mm jednotek]
  • Number of flutes(sheet)
  • Type
  • Výrobce

    • Carbide Radius End Mills (work material: General Steel)

    116 položek
    * Informace o dnech dodání, přepravních nákladech a cenách
    Seznam
    Fotografie
    Porovnat specifikace
  • 1
  • 2
  • 3
  • Další
    • TSC series carbide radius end mill, 2-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 2-flute / regular model

      [Features]General 2-flute cutter with regular flute length and flute radius-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎]3 ～ 602Radius45 ～ 1254 ～ 2023 ～ 55
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

      [Features] -Radius multi-function cutter-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Radius flute is also effective in suppressing chips.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.2 ～ 2General Steel[◎]5 ～ 563Radius60 ～ 1306 ～ 2026 ～ 92
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 2-flute / short model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 2-flute / short model

      [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎]2 ～ 402Radius40 ～ 1104 ～ 2017 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide long neck radius end mill, 2-flute, long neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide long neck radius end mill, 2-flute, long neck model

      Long neck radius that can be used as a ball and allows a large pick feed
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.2 ～ 60.05 ～ 1General Steel[◎]0.16 ～ 122Long-Neck Radius40 ～ 1004 ～ 61 ～ 40
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL series carbide radius end mill, 2-flute / short model
      • Volume Discount
      • XAL
      • General Steel
      • 2 Flutes

      MISUMI

      XAL series carbide radius end mill, 2-flute / short model

      Radius end mills are available at low prices
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]3 ～ 302Radius50 ～ 754 ～ 12-
      Cena (bez DPH) od:
      14.52 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 4-flute / regular model

      [Features] -Regular cutting edge length with cutting edge radius fitted to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]3 ～ 364Radius45 ～ 854 ～ 1223 ～ 55
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide long neck radius end mill, 4-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes

      MISUMI

      TSC series carbide long neck radius end mill, 4-flute / long neck model

      [Features] -Radius (R)-accuracy of ±5 µm (compared to manufacturer's measurements) enables high-precision milling of deep cavities-By adopting 4-spiral shape, it is possible to work with high feed setting compared to 2-spiral shape-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 60.05 ～ 1General Steel[◎]1.5 ～ 124Long-Neck Radius40 ～ 1004 ～ 63 ～ 40
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

      [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]1.5 ～ 182Radius40 ～ 754 ～ 1214 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • HLRS 4-Flute Long-Neck Radius
      • SLEVA

      UNION TOOL

      HLRS 4-Flute Long-Neck Radius

      [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Rigidity-oriented blade shape provides long life even when machining high hardness materials· Capable of stable machining for both dry and wet type· New HARDMAX coating adopted to improve oxidation resistance.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.8 ～ 60.05 ～ 1General Steel[○]0.48 ～ 4.84Long-Neck Radius50 ～ 1204 ～ 62 ～ 48
      Cena (bez DPH) od:
      55.58 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
      • Volume Discount
      • XAL
      • General Steel
      • 4 Flutes

      MISUMI

      XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

      4-Flute Radius for High-Efficiency and High-Speed Machining
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 120.2 ～ 2General Steel[◎]18 ～ 384Radius60 ～ 1006 ～ 12-
      Cena (bez DPH) od:
      23.73 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL series carbide radius end mill, 4-flute / short model
      • Volume Discount
      • XAL
      • General Steel
      • 4 Flutes

      MISUMI

      XAL series carbide radius end mill, 4-flute / short model

      The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.1 ～ 3General Steel[◎]8 ～ 384Radius50 ～ 1004 ～ 20-
      Cena (bez DPH) od:
      18.89 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute, 45°, regular model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 4-flute, 45°, regular model

      [Features] -Radius multi-function cutter-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.2 ～ 3General Steel[◎]5 ～ 564Radius60 ～ 1306 ～ 2026 ～ 92
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • VAC Series Carbide 2-Flute Long Neck Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 2-Flute Long Neck Radius End Mill

      [Features] -Effective for deep cutting due to long neck-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Cutting edge radius also reinforced cutting edge stiff-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.4 ～ 120.1 ～ 1General Steel[◎]0.6 ～ 18-Long-Neck Radius40 ～ 1004 ～ 122 ～ 50
      Cena (bez DPH) od:
      38.08 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • HLRS2000 HM Coated 2 Flute Long-Neck Radius
      • SLEVA
      • Volume Discount

      UNION TOOL

      HLRS2000 HM Coated 2 Flute Long-Neck Radius

      [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Capable of cutting everything from raw materials to high-hardness materials· Capable of stable, long-life machining for both dry and wet type
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.4 ～ 60.05 ～ 1General Steel[○]0.4 ～ 62Long-Neck Radius50 ～ 1204 ～ 61 ～ 60
      Cena (bez DPH) od:
      43.45 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
      • Volume Discount
      • XAL
      • General Steel
      • 3 Flutes

      MISUMI

      XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

      3-flute 45° helix radius that's resistant to chattering is available at an affordable price
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.2 ～ 2General Steel[◎]16 ～ 383Radius60 ～ 1006 ～ 12-
      Cena (bez DPH) od:
      23.73 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 3-flute, 45° spiral / short model

      [Features] -The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.3 ～ 2General Steel[◎]5 ～ 263Radius60 ～ 1006 ～ 1218 ～ 70
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute / stub model

      [Features] -Short cutting edge length with cutting edge radius fitted to a general purpose 4 flute cutter-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]1.5 ～ 184Radius40 ～ 754 ～ 1214 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes

      MISUMI

      TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model

      [Features] -Multi-functional long neck radius with high feed rate and excellent durability-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 40.2 ～ 1General Steel[◎]0.8 ～ 3.23 ～ 4Long-Neck Radius45 ～ 704 ～ 66 ～ 30
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model
      • Volume Discount

      MISUMI

      XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

      Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 200.2 ～ 3General Steel[◎]4 ～ 454Radius50 ～ 1104 ～ 20-
      Cena (bez DPH) od:
      17.06 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • VAC Series Carbide 2-Flute Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 2-Flute Radius End Mill

      [Features] -Cutting edge radius also reinforced cutting edge rigid-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]2.5 ～ 302Radius50 ～ 1306 ～ 12-
      Cena (bez DPH) od:
      49.28 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Powerful Type Multi-Function FXS-PKE
      • Volume Discount

      OSG

      Powerful Type Multi-Function FXS-PKE

      In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.2 ～ 3General Steel[◎]5 ～ 304Radius60 ～ 1606 ～ 209 ～ 60
      Cena (bez DPH) od:
      95.20 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • CRRS UT Coated 4-Flute Radius
      • SLEVA
      • Volume Discount

      UNION TOOL

      CRRS UT Coated 4-Flute Radius

      [Features]· Suitable for everything from raw materials to 55 HRC, the UTCOAT provides a long life· Variable split, high torsion and positive rake angle design enables stable machining· A blade design that reduces the cutting resistance in helical and inclined use, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.3 ～ 2General Steel[◎]2 ～ 124Long-Neck Radius60 ～ 1204 ～ 126 ～ 36
      Cena (bez DPH) od:
      85.32 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Power Radius End Mill MSXH440R
      • Volume Discount

      NS TOOL

      Power Radius End Mill MSXH440R

      Adopts powered-up unequal leads and large unequal divisions to suppress chatter and realize stable machining
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.3 ～ 3General Steel[◎]8 ～ 264Radius60 ～ 806 ～ 12-
      Cena (bez DPH) od:
      69.81 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

      [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 120.813 ～ 2.438General Steel[◎]8 ～ 243High-Feed Radius80 ～ 1606 ～ 1235 ～ 108
      Cena (bez DPH) od:
      93.37 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-use for engraving, side face, rough and medium grinding.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.5 ～ 2General Steel[◎]2 ～ 123High-Feed Radius50 ～ 1004 ～ 12-
      Cena (bez DPH) od:
      87.94 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

      [Features] -Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.5 ～ 1General Steel[◎]4.5 ～ 183Radius60 ～ 1006 ～ 1214 ～ 68
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

      [Features] -Radius end mill-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.5 ～ 1General Steel[◎]4.5 ～ 184Radius60 ～ 1006 ～ 1214 ～ 68
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 4-flute, 45° spiral / short model

      [Features] -Multi-function end mill with radius-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.2 ～ 3General Steel[◎]5 ～ 384Radius60 ～ 1106 ～ 2018 ～ 73
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute / short model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 4-flute / short model

      [Features] -Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]2 ～ 244Radius40 ～ 754 ～ 1217 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

      [Features] -Suppresses chattering with a short flute length and a tapered shape at the peripheral edge-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.2 ～ 30.05 ～ 0.5General Steel[◎]0.16 ～ 62Tapered neck radius40 ～ 1004 ～ 61 ～ 60
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
      • Non-Coated
      • General Steel

      MISUMI

      Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

      [Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎]4 ～ 602 ～ 4Radius40 ～ 1254 ～ 20-
      Běžné datum odeslání:
      7 pracovních dnů
      Konfigurovat
    • TSC Series Carbide Uneven Lead 4-Flute Radius End Mill
      • Volume Discount

      MISUMI

      TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

      Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 250.2 ～ 6.5General Steel[◎]4 ～ 504Radius50 ～ 1206 ～ 25-
      Cena (bez DPH) od:
      47.37 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

      [Features] -Suppresses chatter in uneven pitch and uneven flutes-Stable machining is possible while maintaining finished surface accuracy-Cutting edge radius also enhances cutting edge rigidity-Can machine heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1.5 ～ 120.2 ～ 3General Steel[◎]4 ～ 304Radius50 ～ 1506 ～ 12-
      Cena (bez DPH) od:
      49.28 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill

      [Features] -Effective for deep cutting due to long neck type-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can process heat treated steel up to 50HRC-Cutting edge radius also reinforced cutting edge rigid-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.2 ～ 1General Steel[◎]1.5 ～ 304Long-Neck Radius50 ～ 1104 ～ 124 ～ 50
      Cena (bez DPH) od:
      40.28 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Multi-Function Type for Deep Wall Applications FXS-MFE

        OSG

        Multi-Function Type for Deep Wall Applications FXS-MFE

        A wide standing wall is machined with high efficiency and precision in step cutting.Coated for steelStandard/Alteration Category: Manufacturer's standard productNumber of flutes (pcs.) 4Spiral angle, Strong spiral (45 to 60°).
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        100.5General Steel[◎]154Radius1308-
        Cena (bez DPH) od:
        225.60 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius
        • SLEVA

        UNION TOOL

        HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius

        [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Capable of cutting everything from raw materials to high-hardness materials· Capable of stable, long-life machining for both dry and wet type
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        0.2 ～ 60.05 ～ 1General Steel[○]0.2 ～ 62Long-Neck Radius50 ～ 1004 ～ 60.5 ～ 30
        Cena (bez DPH) od:
        60.34 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730
        • Volume Discount

        SANDVIK

        CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730

        [Features]· Twice the cutting depth that was conventionally possible· Ideal for everything from shoulder cutting to full grooving.· With reinforced edge lines, assures long product life even with intense machining.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        -0.5 ～ 2General Steel[○]-4Radius57 ～ 726 ～ 12-
        Cena (bez DPH) od:
        111.93 €
        Běžné datum odeslání:
        8 pracovních dnů
        Konfigurovat
      • HRRS 6-Flute Long Neck Radius

          UNION TOOL

          HRRS 6-Flute Long Neck Radius

          [Features] · A long neck radius end mill; ideal for machining high hardness materials. · 6-flute type; designed with an emphasis on rigidity.
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          --General Steel[○]6 ～ 126Long-Neck Radius60 ～ 1006 ～ 12-
          Cena (bez DPH) od:
          116.34 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
          • Volume Discount
          • TS
          • High-Hardness Steel
          • 3 Flutes
          • S (Short)

          MISUMI

          TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

          Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          4 ～ 120.813 ～ 2.438General Steel[◎]8 ～ 243High-Feed Radius50 ～ 1006 ～ 12-
          Cena (bez DPH) od:
          122.52 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model
          • Volume Discount
          • TS
          • High-Hardness Steel
          • 4 Flutes
          • S (Short)

          MISUMI

          TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

          [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          4 ～ 200.813 ～ 2.607General Steel[◎]8 ～ 404High-Feed Radius50 ～ 1506 ～ 20-
          Cena (bez DPH) od:
          116.38 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model
          • Volume Discount
          • TS
          • High-Hardness Steel
          • 4 Flutes
          • S (Short)

          MISUMI

          TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

          [Features] -Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          4 ～ 120.813 ～ 2.438General Steel[◎]8 ～ 244High-Feed Radius80 ～ 1606 ～ 1235 ～ 108
          Cena (bez DPH) od:
          96.97 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • TSC series carbide radius end mill, 4-flute / stub model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill, 4-flute / stub model

          A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 60.2 ～ 0.5General Steel[◎]3 ～ 94Radius506-
          Cena (bez DPH) od:
          59.74 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
          • Volume Discount
          • TS
          • High-Hardness Steel
          • 3 Flutes
          • S (Short)

          MISUMI

          TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

          [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining-Multi-faceted type that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 120.5 ～ 2General Steel[◎]4 ～ 243High-Feed Radius50 ～ 1004 ～ 12-
          Cena (bez DPH) od:
          83.28 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
          • Volume Discount
          • TS
          • High-Hardness Steel
          • 4 Flutes

          MISUMI

          TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

          [Features] -High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 120.75 ～ 3General Steel[◎]1.2 ～ 54High-Feed Radius60 ～ 1106 ～ 127.5 ～ 24
          Cena (bez DPH) od:
          64.07 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
          • Volume Discount
          • TS
          • High-Hardness Steel
          • 4 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

          [Features] -High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-purpose for engraving, side face, rough and medium finishing-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 120.5 ～ 2General Steel[◎]2 ～ 124High-Feed Radius50 ～ 1004 ～ 12-
          Cena (bez DPH) od:
          56.61 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
      • 1
      • 2
      • 3
      • Další

        • Nenašli jste produkt, který hledáte?

        Nedávno zobrazené produkty

        Kategorie související s Carbide Radius End Mills