Registrace

Překládáme náš obchod do češtiny! 

Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Kategorie
Zobrazit další
Podmínky filtrování

Vymazat vše

  • Blade diameter (D)(φ)
  • R Size(mm)
    [0.1–3/0.1mm jednotek]
  • work material
  • Blade length (ℓ)(mm)
    [5–56/1mm jednotek]
  • Number of flutes(sheet)
  • Type
  • Výrobce

MISUMI Carbide Radius End Mills（work material：General Steel）

50 položek
* Informace o dnech dodání, přepravních nákladech a cenách
Seznam
Fotografie
Porovnat specifikace
  • 1
  • 2
  • Další
    • TSC series carbide radius end mill, 2-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 2-flute / regular model

      [Features]General 2-flute cutter with regular flute length and flute radius-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎]3 ～ 602Radius45 ～ 1254 ～ 2023 ～ 55
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

      [Features] -Radius multi-function cutter-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Radius flute is also effective in suppressing chips.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.2 ～ 2General Steel[◎]5 ～ 563Radius60 ～ 1306 ～ 2026 ～ 92
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 2-flute / short model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 2-flute / short model

      [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎]2 ～ 402Radius40 ～ 1104 ～ 2017 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 4-flute / regular model

      [Features] -Regular cutting edge length with cutting edge radius fitted to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]3 ～ 364Radius45 ～ 854 ～ 1223 ～ 55
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL series carbide radius end mill, 2-flute / short model
      • Volume Discount
      • XAL
      • General Steel
      • 2 Flutes

      MISUMI

      XAL series carbide radius end mill, 2-flute / short model

      Radius end mills are available at low prices
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]3 ～ 302Radius50 ～ 754 ～ 12-
      Cena (bez DPH) od:
      14.52 €
      Cena včetně DPH:
      17.28 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide long neck radius end mill, 2-flute, long neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide long neck radius end mill, 2-flute, long neck model

      Long neck radius that can be used as a ball and allows a large pick feed
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.2 ～ 60.05 ～ 1General Steel[◎]0.16 ～ 122Long-Neck Radius40 ～ 1004 ～ 61 ～ 40
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide long neck radius end mill, 4-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes

      MISUMI

      TSC series carbide long neck radius end mill, 4-flute / long neck model

      [Features] -Radius (R)-accuracy of ±5 µm (compared to manufacturer's measurements) enables high-precision milling of deep cavities-By adopting 4-spiral shape, it is possible to work with high feed setting compared to 2-spiral shape-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 60.05 ～ 1General Steel[◎]1.5 ～ 124Long-Neck Radius40 ～ 1004 ～ 63 ～ 40
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

      [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]1.5 ～ 182Radius40 ～ 754 ～ 1214 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
      • Volume Discount
      • XAL
      • General Steel
      • 4 Flutes

      MISUMI

      XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

      4-Flute Radius for High-Efficiency and High-Speed Machining
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 120.2 ～ 2General Steel[◎]18 ～ 384Radius60 ～ 1006 ～ 12-
      Cena (bez DPH) od:
      23.73 €
      Cena včetně DPH:
      28.24 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute, 45°, regular model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 4-flute, 45°, regular model

      [Features] -Radius multi-function cutter-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.2 ～ 3General Steel[◎]5 ～ 564Radius60 ～ 1306 ～ 2026 ～ 92
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • VAC Series Carbide 2-Flute Long Neck Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 2-Flute Long Neck Radius End Mill

      [Features] -Effective for deep cutting due to long neck-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Cutting edge radius also reinforced cutting edge stiff-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.4 ～ 120.1 ～ 1General Steel[◎]0.6 ～ 18-Long-Neck Radius40 ～ 1004 ～ 122 ～ 50
      Cena (bez DPH) od:
      38.08 €
      Cena včetně DPH:
      45.32 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
      • Volume Discount
      • XAL
      • General Steel
      • 3 Flutes

      MISUMI

      XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

      3-flute 45° helix radius that's resistant to chattering is available at an affordable price
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.2 ～ 2General Steel[◎]16 ～ 383Radius60 ～ 1006 ～ 12-
      Cena (bez DPH) od:
      23.73 €
      Cena včetně DPH:
      28.24 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL series carbide radius end mill, 4-flute / short model
      • Volume Discount
      • XAL
      • General Steel
      • 4 Flutes

      MISUMI

      XAL series carbide radius end mill, 4-flute / short model

      The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.1 ～ 3General Steel[◎]8 ～ 384Radius50 ～ 1004 ～ 20-
      Cena (bez DPH) od:
      18.89 €
      Cena včetně DPH:
      22.48 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 3-flute, 45° spiral / short model

      [Features] -The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.3 ～ 2General Steel[◎]5 ～ 263Radius60 ～ 1006 ～ 1218 ～ 70
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute / stub model

      [Features] -Short cutting edge length with cutting edge radius fitted to a general purpose 4 flute cutter-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]1.5 ～ 184Radius40 ～ 754 ～ 1214 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes

      MISUMI

      TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model

      [Features] -Multi-functional long neck radius with high feed rate and excellent durability-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 40.2 ～ 1General Steel[◎]0.8 ～ 3.23 ～ 4Long-Neck Radius45 ～ 704 ～ 66 ～ 30
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model
      • Volume Discount

      MISUMI

      XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

      Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 200.2 ～ 3General Steel[◎]4 ～ 454Radius50 ～ 1104 ～ 20-
      Cena (bez DPH) od:
      17.06 €
      Cena včetně DPH:
      20.30 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • VAC Series Carbide 2-Flute Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 2-Flute Radius End Mill

      [Features] -Cutting edge radius also reinforced cutting edge rigid-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]2.5 ～ 302Radius50 ～ 1306 ～ 12-
      Cena (bez DPH) od:
      49.28 €
      Cena včetně DPH:
      58.64 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

      [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 200.813 ～ 2.607General Steel[◎]8 ～ 404High-Feed Radius50 ～ 1506 ～ 20-
      Cena (bez DPH) od:
      116.38 €
      Cena včetně DPH:
      138.49 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

      [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 120.813 ～ 2.438General Steel[◎]8 ～ 243High-Feed Radius80 ～ 1606 ～ 1235 ～ 108
      Cena (bez DPH) od:
      93.37 €
      Cena včetně DPH:
      111.11 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-use for engraving, side face, rough and medium grinding.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.5 ～ 2General Steel[◎]2 ～ 123High-Feed Radius50 ～ 1004 ～ 12-
      Cena (bez DPH) od:
      87.94 €
      Cena včetně DPH:
      104.65 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

      [Features] -Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.5 ～ 1General Steel[◎]4.5 ～ 183Radius60 ～ 1006 ～ 1214 ～ 68
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

      [Features] -Radius end mill-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.5 ～ 1General Steel[◎]4.5 ～ 184Radius60 ～ 1006 ～ 1214 ～ 68
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 4-flute, 45° spiral / short model

      [Features] -Multi-function end mill with radius-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.2 ～ 3General Steel[◎]5 ～ 384Radius60 ～ 1106 ～ 2018 ～ 73
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute / short model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 4-flute / short model

      [Features] -Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎]2 ～ 244Radius40 ～ 754 ～ 1217 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

      [Features] -Suppresses chattering with a short flute length and a tapered shape at the peripheral edge-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.2 ～ 30.05 ～ 0.5General Steel[◎]0.16 ～ 62Tapered neck radius40 ～ 1004 ～ 61 ～ 60
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
      • Non-Coated
      • General Steel

      MISUMI

      Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

      [Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎]4 ～ 602 ～ 4Radius40 ～ 1254 ～ 20-
      Běžné datum odeslání:
      7 pracovních dnů
      Konfigurovat
    • VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

      [Features] -Suppresses chatter in uneven pitch and uneven flutes-Stable machining is possible while maintaining finished surface accuracy-Cutting edge radius also enhances cutting edge rigidity-Can machine heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1.5 ～ 120.2 ～ 3General Steel[◎]4 ～ 304Radius50 ～ 1506 ～ 12-
      Cena (bez DPH) od:
      49.28 €
      Cena včetně DPH:
      58.64 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill

      [Features] -Effective for deep cutting due to long neck type-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can process heat treated steel up to 50HRC-Cutting edge radius also reinforced cutting edge rigid-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.2 ～ 1General Steel[◎]1.5 ～ 304Long-Neck Radius50 ～ 1104 ～ 124 ～ 50
      Cena (bez DPH) od:
      40.28 €
      Cena včetně DPH:
      47.93 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

      Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 120.813 ～ 2.438General Steel[◎]8 ～ 243High-Feed Radius50 ～ 1006 ～ 12-
      Cena (bez DPH) od:
      122.52 €
      Cena včetně DPH:
      145.80 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

      [Features] -Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 120.813 ～ 2.438General Steel[◎]8 ～ 244High-Feed Radius80 ～ 1606 ～ 1235 ～ 108
      Cena (bez DPH) od:
      96.97 €
      Cena včetně DPH:
      115.39 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute / stub model

      A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 60.2 ～ 0.5General Steel[◎]3 ～ 94Radius506-
      Cena (bez DPH) od:
      59.74 €
      Cena včetně DPH:
      71.09 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining-Multi-faceted type that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.5 ～ 2General Steel[◎]4 ～ 243High-Feed Radius50 ～ 1004 ～ 12-
      Cena (bez DPH) od:
      83.28 €
      Cena včetně DPH:
      99.10 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

      [Features] -High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.75 ～ 3General Steel[◎]1.2 ～ 54High-Feed Radius60 ～ 1106 ～ 127.5 ～ 24
      Cena (bez DPH) od:
      64.07 €
      Cena včetně DPH:
      76.24 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-purpose for engraving, side face, rough and medium finishing-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.5 ～ 2General Steel[◎]2 ～ 124High-Feed Radius50 ～ 1004 ～ 12-
      Cena (bez DPH) od:
      56.61 €
      Cena včetně DPH:
      67.37 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Variable design that can be used for engraving, side faces, coarse and medium finish-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 200.5 ～ 3General Steel[◎]4 ～ 404High-Feed Radius50 ～ 1304 ～ 20-
      Cena (bez DPH) od:
      77.71 €
      Cena včetně DPH:
      92.47 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

      Long neck type with interference prevention can be selected from a number of effective lengths
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 161 ～ 3General Steel[◎]6 ～ 244Long-Neck Radius70 ～ 1804 ～ 16-
      Cena (bez DPH) od:
      92.43 €
      Cena včetně DPH:
      109.99 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

      [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.3 ～ 1General Steel[◎]4.5 ～ 183Radius40 ～ 656 ～ 12-
      Cena (bez DPH) od:
      76.51 €
      Cena včetně DPH:
      91.05 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

      [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.3 ～ 1General Steel[◎]4.5 ～ 184Radius40 ～ 656 ～ 12-
      Cena (bez DPH) od:
      82.35 €
      Cena včetně DPH:
      98.00 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

      [Features] -Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter-Long shank is ideal for milling deep cavities-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 220.2 ～ 2General Steel[◎]4.5 ～ 304Radius80 ～ 2006 ～ 2010 ～ 18
      Cena (bez DPH) od:
      76.72 €
      Cena včetně DPH:
      91.30 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 2-flute stub model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 2-flute stub model

      [Features] -Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.2 ～ 3General Steel[◎]3 ～ 182Radius35 ～ 604 ～ 12-
      Cena (bez DPH) od:
      34.89 €
      Cena včetně DPH:
      41.52 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute / stub model

      [Features] -Designed with optimum blade length, shank length and overall length considering processing with shrink holder-Can be resharpened. Please refer to the "Regrinding Service" page for information on possible applications, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.3 ～ 1General Steel[◎]3 ～ 184Radius35 ～ 604 ～ 12-
      Cena (bez DPH) od:
      45.06 €
      Cena včetně DPH:
      53.62 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

      By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.8 ～ 2General Steel[◎]4.5 ～ 183Tapered neck radius80 ～ 1606 ～ 1624 ～ 105
      Cena (bez DPH) od:
      87.20 €
      Cena včetně DPH:
      103.77 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model

      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Conical neck effectively suppresses chatter-Variable design that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.8 ～ 2General Steel[◎]4.5 ～ 184Tapered neck radius80 ～ 1606 ～ 1624 ～ 105
      Cena (bez DPH) od:
      101.43 €
      Cena včetně DPH:
      120.70 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

      The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 60.2 ～ 0.5General Steel[○]3 ～ 94High-Feed Radius506-
      Cena (bez DPH) od:
      100.26 €
      Cena včetně DPH:
      119.31 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
  • 1
  • 2
  • Další

    • Kategorie související s Carbide Radius End Mills