Radius End Mills (Carbide) (work material: Cast Iron)

• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  MISUMI

  TSC series carbide radius end mill, 2-flute / regular model

  [Features]General 2-flute cutter with regular flute length and flute radius-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 20	0.1 ～ 3	Cast Iron[○]	3 ～ 60	2	Radius	45 ～ 125	4 ～ 20	23 ～ 55

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  MISUMI

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  [Features] -Radius multi-function cutter-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Radius flute is also effective in suppressing chips.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	0.2 ～ 2	Cast Iron[○]	5 ～ 56	3	Radius	60 ～ 130	6 ～ 20	26 ～ 92

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 2-flute / short model

  [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 20	0.1 ～ 3	Cast Iron[○]	2 ～ 40	2	Radius	40 ～ 110	4 ～ 20	17 ～ 45

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  MISUMI

  TSC series carbide radius end mill, 4-flute / regular model

  [Features] -Regular cutting edge length with cutting edge radius fitted to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	0.1 ～ 3	Cast Iron[○]	3 ～ 36	4	Radius	45 ～ 85	4 ～ 12	23 ～ 55

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • XAL
  • General Steel
  • 2 Flutes

  MISUMI

  XAL series carbide radius end mill, 2-flute / short model

  Radius end mills are available at low prices

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	0.1 ～ 3	Cast Iron[◎]	3 ～ 30	2	Radius	50 ～ 75	4 ～ 12	-

  Cena (bez DPH) od:

  14.52 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

  [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	0.1 ～ 3	Cast Iron[○]	1.5 ～ 18	2	Radius	40 ～ 75	4 ～ 12	14 ～ 45

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • XAL
  • General Steel
  • 4 Flutes

  MISUMI

  XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  4-Flute Radius for High-Efficiency and High-Speed Machining

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 12	0.2 ～ 2	Cast Iron[◎]	18 ～ 38	4	Radius	60 ～ 100	6 ～ 12	-

  Cena (bez DPH) od:

  23.73 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45°, regular model

  [Features] -Radius multi-function cutter-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	0.2 ～ 3	Cast Iron[○]	5 ～ 56	4	Radius	60 ～ 130	6 ～ 20	26 ～ 92

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • XAL
  • General Steel
  • 3 Flutes

  MISUMI

  XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.2 ～ 2	Cast Iron[◎]	16 ～ 38	3	Radius	60 ～ 100	6 ～ 12	-

  Cena (bez DPH) od:

  23.73 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • XAL
  • General Steel
  • 4 Flutes

  MISUMI

  XAL series carbide radius end mill, 4-flute / short model

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	0.1 ～ 3	Cast Iron[◎]	8 ～ 38	4	Radius	50 ～ 100	4 ～ 20	-

  Cena (bez DPH) od:

  18.89 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 3-flute, 45° spiral / short model

  [Features] -The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.3 ～ 2	Cast Iron[○]	5 ～ 26	3	Radius	60 ～ 100	6 ～ 12	18 ～ 70

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 4-flute / stub model

  [Features] -Short cutting edge length with cutting edge radius fitted to a general purpose 4 flute cutter-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	0.1 ～ 3	Cast Iron[○]	1.5 ～ 18	4	Radius	40 ～ 75	4 ～ 12	14 ～ 45

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  MISUMI

  XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

  Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 20	0.2 ～ 3	Cast Iron[◎]	4 ～ 45	4	Radius	50 ～ 110	4 ～ 20	-

  Cena (bez DPH) od:

  17.06 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  MISUMI

  VAC Series Carbide 2-Flute Radius End Mill

  [Features] -Cutting edge radius also reinforced cutting edge rigid-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	0.1 ～ 3	Cast Iron[○]	2.5 ～ 30	2	Radius	50 ～ 130	6 ～ 12	-

  Cena (bez DPH) od:

  49.28 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

  [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 20	0.813 ～ 2.607	Cast Iron[◎]	8 ～ 40	4	High-Feed Radius	50 ～ 150	6 ～ 20	-

  Cena (bez DPH) od:

  116.38 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

  [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 12	0.813 ～ 2.438	Cast Iron[◎]	8 ～ 24	3	High-Feed Radius	80 ～ 160	6 ～ 12	35 ～ 108

  Cena (bez DPH) od:

  93.37 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-use for engraving, side face, rough and medium grinding.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.5 ～ 2	Cast Iron[◎]	2 ～ 12	3	High-Feed Radius	50 ～ 100	4 ～ 12	-

  Cena (bez DPH) od:

  87.94 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

  [Features] -Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.5 ～ 1	Cast Iron[○]	4.5 ～ 18	3	Radius	60 ～ 100	6 ～ 12	14 ～ 68

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

  [Features] -Radius end mill-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.5 ～ 1	Cast Iron[○]	4.5 ～ 18	4	Radius	60 ～ 100	6 ～ 12	14 ～ 68

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral / short model

  [Features] -Multi-function end mill with radius-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	0.2 ～ 3	Cast Iron[○]	5 ～ 38	4	Radius	60 ～ 110	6 ～ 20	18 ～ 73

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 4-flute / short model

  [Features] -Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	0.1 ～ 3	Cast Iron[○]	2 ～ 24	4	Radius	40 ～ 75	4 ～ 12	17 ～ 45

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes

  MISUMI

  TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

  [Features] -Suppresses chattering with a short flute length and a tapered shape at the peripheral edge-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  0.2 ～ 3	0.05 ～ 0.5	Cast Iron[○]	0.16 ～ 6	2	Tapered neck radius	40 ～ 100	4 ～ 6	1 ～ 60

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Non-Coated
  • General Steel

  MISUMI

  Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

  [Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 20	0.1 ～ 3	Cast Iron[○]	4 ～ 60	2 ～ 4	Radius	40 ～ 125	4 ～ 20	-

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  MISUMI

  VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

  [Features] -Suppresses chatter in uneven pitch and uneven flutes-Stable machining is possible while maintaining finished surface accuracy-Cutting edge radius also enhances cutting edge rigidity-Can machine heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1.5 ～ 12	0.2 ～ 3	Cast Iron[○]	4 ～ 30	4	Radius	50 ～ 150	6 ～ 12	-

  Cena (bez DPH) od:

  49.28 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  SANDVIK

  CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730

  [Features]· Twice the cutting depth that was conventionally possible· Ideal for everything from shoulder cutting to full grooving.· With reinforced edge lines, assures long product life even with intense machining.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  -	0.5 ～ 2	Cast Iron[○]	-	4	Radius	57 ～ 72	6 ～ 12	-

  Cena (bez DPH) od:

  111.93 €

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

  Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 12	0.813 ～ 2.438	Cast Iron[◎]	8 ～ 24	3	High-Feed Radius	50 ～ 100	6 ～ 12	-

  Cena (bez DPH) od:

  122.52 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

  [Features] -Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 12	0.813 ～ 2.438	Cast Iron[◎]	8 ～ 24	4	High-Feed Radius	80 ～ 160	6 ～ 12	35 ～ 108

  Cena (bez DPH) od:

  96.97 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 4-flute / stub model

  A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 6	0.2 ～ 0.5	Cast Iron[○]	3 ～ 9	4	Radius	50	6	-

  Cena (bez DPH) od:

  59.74 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining-Multi-faceted type that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.5 ～ 2	Cast Iron[◎]	4 ～ 24	3	High-Feed Radius	50 ～ 100	4 ～ 12	-

  Cena (bez DPH) od:

  83.28 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  [Features] -High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.75 ～ 3	Cast Iron[◎]	1.2 ～ 5	4	High-Feed Radius	60 ～ 110	6 ～ 12	7.5 ～ 24

  Cena (bez DPH) od:

  64.07 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-purpose for engraving, side face, rough and medium finishing-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.5 ～ 2	Cast Iron[◎]	2 ～ 12	4	High-Feed Radius	50 ～ 100	4 ～ 12	-

  Cena (bez DPH) od:

  56.61 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Variable design that can be used for engraving, side faces, coarse and medium finish-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 20	0.5 ～ 3	Cast Iron[◎]	4 ～ 40	4	High-Feed Radius	50 ～ 130	4 ～ 20	-

  Cena (bez DPH) od:

  77.71 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  Long neck type with interference prevention can be selected from a number of effective lengths

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 16	1 ～ 3	Cast Iron[◎]	6 ～ 24	4	Long-Neck Radius	70 ～ 180	4 ～ 16	-

  Cena (bez DPH) od:

  92.43 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.3 ～ 1	Cast Iron[○]	4.5 ～ 18	3	Radius	40 ～ 65	6 ～ 12	-

  Cena (bez DPH) od:

  76.51 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

  [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.3 ～ 1	Cast Iron[○]	4.5 ～ 18	4	Radius	40 ～ 65	6 ～ 12	-

  Cena (bez DPH) od:

  82.35 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

  [Features] -Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter-Long shank is ideal for milling deep cavities-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 22	0.2 ～ 2	Cast Iron[○]	4.5 ～ 30	4	Radius	80 ～ 200	6 ～ 20	10 ～ 18

  Cena (bez DPH) od:

  76.72 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 2-flute stub model

  [Features] -Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.2 ～ 3	Cast Iron[○]	3 ～ 18	2	Radius	35 ～ 60	4 ～ 12	-

  Cena (bez DPH) od:

  34.89 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 4-flute / stub model

  [Features] -Designed with optimum blade length, shank length and overall length considering processing with shrink holder-Can be resharpened. Please refer to the "Regrinding Service" page for information on possible applications, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.3 ～ 1	Cast Iron[○]	3 ～ 18	4	Radius	35 ～ 60	4 ～ 12	-

  Cena (bez DPH) od:

  45.06 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

  By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.8 ～ 2	Cast Iron[◎]	4.5 ～ 18	3	Tapered neck radius	80 ～ 160	6 ～ 16	24 ～ 105

  Cena (bez DPH) od:

  87.20 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Conical neck effectively suppresses chatter-Variable design that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.8 ～ 2	Cast Iron[◎]	4.5 ～ 18	4	Tapered neck radius	80 ～ 160	6 ～ 16	24 ～ 105

  Cena (bez DPH) od:

  101.43 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

  The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 6	0.2 ～ 0.5	Cast Iron[◎]	3 ～ 9	4	High-Feed Radius	50	6	-

  Cena (bez DPH) od:

  100.26 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • Multi-Flutes （5 ~）
  • B (Stub)

  MISUMI

  TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model

  [Features] -High helix angle and radius end mill for machining high hardness steel-High tool rigidity minimises tool tilt when side milling-Machining high hardness steel up to 65HRC is possible-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  6 ～ 12	0.5 ～ 2	Cast Iron[◎]	5 ～ 12	6	Radius	60 ～ 85	6 ～ 12	11 ～ 55

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes

  MISUMI

  TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-The long neck type is ideal for milling deep pockets, etc.-Multi-use for engraving, side faces, R, coarse and medium finish-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 12	1 ～ 2	Cast Iron[◎]	8 ～ 24	3	Long-Neck Radius	70 ～ 140	4 ～ 12	-

  Cena (bez DPH) od:

  90.46 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  MISUMI

  XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 45° radius end mill capable of high-speed and high-efficiency machining

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 12	0.2 ～ 1	Cast Iron[◎]	18 ～ 38	4	Radius	60 ～ 100	6 ～ 12	-

  Cena (bez DPH) od:

  75.31 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  MISUMI

  TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

  Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)

  Více informací

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 25	0.2 ～ 6.5	Cast Iron[○]	4 ～ 50	4	Radius	50 ～ 120	6 ～ 25	-

  Cena (bez DPH) od:

  47.37 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat