Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
Carbide Radius End Mills (work material: Aluminum)
83 položek
* Informace o dnech dodání, přepravních nákladech a cenách
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
MISUMI
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machiningVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 5 ～ 22 0.5 ～ 2 Aluminum[◎] 9 ～ 33 3 Radius 80 ～ 200 4 ～ 20 - KonfigurovatCena (bez DPH) od:109.63 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
TSC Series Carbide Uneven Lead 4-Flute Radius End Mill
Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 2 ～ 25 0.2 ～ 6.5 Aluminum[○] 4 ～ 50 4 Radius 50 ～ 120 6 ～ 25 - KonfigurovatCena (bez DPH) od:47.37 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
[Features] -Suppresses chatter in uneven pitch and uneven flutes-Stable machining is possible while maintaining finished surface accuracy-Cutting edge radius also enhances cutting edge rigidity-Can machine heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1.5 ～ 12 0.2 ～ 3 Aluminum[○] 4 ～ 30 4 Radius 50 ～ 150 6 ～ 12 - KonfigurovatCena (bez DPH) od:49.28 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- XAL
- General Steel
- 2 Flutes
MISUMI
XAL series carbide radius end mill, 2-flute / short model
Radius end mills are available at low pricesVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 12 0.1 ～ 3 Aluminum[◎] 3 ～ 30 2 Radius 50 ～ 75 4 ～ 12 - KonfigurovatCena (bez DPH) od:14.52 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- XAL
- General Steel
- 4 Flutes
MISUMI
XAL series carbide radius end mill, 4-flute / short model
The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizesVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 20 0.1 ～ 3 Aluminum[◎] 8 ～ 38 4 Radius 50 ～ 100 4 ～ 20 - KonfigurovatCena (bez DPH) od:18.89 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 2 Flutes
MISUMI
TSC series carbide long neck radius end mill, 2-flute, long neck model
Long neck radius that can be used as a ball and allows a large pick feedVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 0.2 ～ 6 0.05 ～ 1 Aluminum[○] 0.16 ～ 12 2 Long-Neck Radius 40 ～ 100 4 ～ 6 1 ～ 40 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
OSG
3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS
Even in machining of aluminum parts with high cutting removal rate, performs chip discharge ability excellent in creating of unique groove form, at the same time achieving significant depth of cut and high feed.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 6 ～ 12 0.5 ～ 2 Aluminum[◎] 13 ～ 26 3 Radius 50 ～ 75 6 ～ 12 - KonfigurovatCena (bez DPH) od:66.10 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
NS TOOL
Power Radius End Mill MSXH440R
Adopts powered-up unequal leads and large unequal divisions to suppress chatter and realize stable machiningVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 12 0.3 ～ 3 Aluminum[○] 8 ～ 26 4 Radius 60 ～ 80 6 ～ 12 - KonfigurovatCena (bez DPH) od:69.81 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
MISUMI
TSC series carbide radius end mill, 4-flute / stub model
A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machiningVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 2 ～ 6 0.2 ～ 0.5 Aluminum[○] 3 ～ 9 4 Radius 50 6 - KonfigurovatCena (bez DPH) od:59.74 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- XAL
- General Steel
- 3 Flutes
MISUMI
XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
3-flute 45° helix radius that's resistant to chattering is available at an affordable priceVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 12 0.2 ～ 2 Aluminum[◎] 16 ～ 38 3 Radius 60 ～ 100 6 ～ 12 - KonfigurovatCena (bez DPH) od:23.73 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- XAL
- General Steel
- 4 Flutes
MISUMI
XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
4-Flute Radius for High-Efficiency and High-Speed MachiningVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 4 ～ 12 0.2 ～ 2 Aluminum[◎] 18 ～ 38 4 Radius 60 ～ 100 6 ～ 12 - KonfigurovatCena (bez DPH) od:23.73 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
MISUMI
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
[Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 12 0.3 ～ 1 Aluminum[○] 4.5 ～ 18 3 Radius 40 ～ 65 6 ～ 12 - KonfigurovatCena (bez DPH) od:76.51 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
MISUMI
TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model
[Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 12 0.3 ～ 1 Aluminum[○] 4.5 ～ 18 4 Radius 40 ～ 65 6 ～ 12 - KonfigurovatCena (bez DPH) od:82.35 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
MISUMI
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
[Features] -Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 12 0.5 ～ 1 Aluminum[○] 4.5 ～ 18 3 Radius 60 ～ 100 6 ～ 12 14 ～ 68 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
MISUMI
TSC series carbide radius end mill, 3-flute, 45° spiral / short model
[Features] -The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 12 0.3 ～ 2 Aluminum[○] 5 ～ 26 3 Radius 60 ～ 100 6 ～ 12 18 ～ 70 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
MISUMI
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
[Features] -Radius multi-function cutter-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Radius flute is also effective in suppressing chips.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 20 0.2 ～ 2 Aluminum[○] 5 ～ 56 3 Radius 60 ～ 130 6 ～ 20 26 ～ 92 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
MISUMI
TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
[Features] -Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter-Long shank is ideal for milling deep cavities-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 22 0.2 ～ 2 Aluminum[○] 4.5 ～ 30 4 Radius 80 ～ 200 6 ～ 20 10 ～ 18 KonfigurovatCena (bez DPH) od:76.72 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
MISUMI
TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
[Features] -Radius end mill-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same timeVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 12 0.5 ～ 1 Aluminum[○] 4.5 ～ 18 4 Radius 60 ～ 100 6 ～ 12 14 ～ 68 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
MISUMI
TSC series carbide radius end mill, 4-flute, 45° spiral / short model
[Features] -Multi-function end mill with radius-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 20 0.2 ～ 3 Aluminum[○] 5 ～ 38 4 Radius 60 ～ 110 6 ～ 20 18 ～ 73 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
MISUMI
TSC series carbide radius end mill, 4-flute, 45°, regular model
[Features] -Radius multi-function cutter-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 20 0.2 ～ 3 Aluminum[○] 5 ～ 56 4 Radius 60 ～ 130 6 ～ 20 26 ～ 92 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
MISUMI
TSC series carbide radius end mill, 2-flute stub model
[Features] -Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 2 ～ 12 0.2 ～ 3 Aluminum[○] 3 ～ 18 2 Radius 35 ～ 60 4 ～ 12 - KonfigurovatCena (bez DPH) od:34.89 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
MISUMI
TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
[Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 12 0.1 ～ 3 Aluminum[○] 1.5 ～ 18 2 Radius 40 ～ 75 4 ～ 12 14 ～ 45 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
MISUMI
TSC series carbide radius end mill, 2-flute / short model
[Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 20 0.1 ～ 3 Aluminum[○] 2 ～ 40 2 Radius 40 ～ 110 4 ～ 20 17 ～ 45 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
MISUMI
TSC series carbide radius end mill, 2-flute / regular model
[Features]General 2-flute cutter with regular flute length and flute radius-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 20 0.1 ～ 3 Aluminum[○] 3 ～ 60 2 Radius 45 ～ 125 4 ～ 20 23 ～ 55 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
MISUMI
TSC series carbide radius end mill, 4-flute / stub model
[Features] -Designed with optimum blade length, shank length and overall length considering processing with shrink holder-Can be resharpened. Please refer to the "Regrinding Service" page for information on possible applications, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 2 ～ 12 0.3 ～ 1 Aluminum[○] 3 ～ 18 4 Radius 35 ～ 60 4 ～ 12 - KonfigurovatCena (bez DPH) od:45.06 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
MISUMI
TSC series carbide radius end mill, 4-flute / stub model
[Features] -Short cutting edge length with cutting edge radius fitted to a general purpose 4 flute cutter-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 12 0.1 ～ 3 Aluminum[○] 1.5 ～ 18 4 Radius 40 ～ 75 4 ～ 12 14 ～ 45 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
MISUMI
TSC series carbide radius end mill, 4-flute / short model
[Features] -Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 12 0.1 ～ 3 Aluminum[○] 2 ～ 24 4 Radius 40 ～ 75 4 ～ 12 17 ～ 45 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
MISUMI
TSC series carbide radius end mill, 4-flute / regular model
[Features] -Regular cutting edge length with cutting edge radius fitted to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 12 0.1 ～ 3 Aluminum[○] 3 ～ 36 4 Radius 45 ～ 85 4 ～ 12 23 ～ 55 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 3 Flutes
MISUMI
TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
[Features] -Multi-functional long neck radius with high feed rate and excellent durability-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 4 0.2 ～ 1 Aluminum[○] 0.8 ～ 3.2 3 ～ 4 Long-Neck Radius 45 ～ 70 4 ～ 6 6 ～ 30 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 4 Flutes
MISUMI
TSC series carbide long neck radius end mill, 4-flute / long neck model
[Features] -Radius (R)-accuracy of ±5 µm (compared to manufacturer's measurements) enables high-precision milling of deep cavities-By adopting 4-spiral shape, it is possible to work with high feed setting compared to 2-spiral shape-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 6 0.05 ～ 1 Aluminum[○] 1.5 ～ 12 4 Long-Neck Radius 40 ～ 100 4 ～ 6 3 ～ 40 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- General Steel
- 2 Flutes
MISUMI
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
[Features] -Suppresses chattering with a short flute length and a tapered shape at the peripheral edge-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 0.2 ～ 3 0.05 ～ 0.5 Aluminum[○] 0.16 ～ 6 2 Tapered neck radius 40 ～ 100 4 ～ 6 1 ～ 60 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- TS
- SUS
- 3 Flutes
- S (Short)
MISUMI
TSC series carbide radius end mill, 3-flute, 45° spiral / short model
The popular radius type for stainless steel processing is also effective in preventing chippingVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 ～ 12 0.5 ～ 2 Aluminum[○] 7 ～ 18 3 Radius 60 ～ 100 6 ～ 12 - KonfigurovatCena (bez DPH) od:93.25 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- R (Regular)
MISUMI
DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
In addition to the standard products, the radius can be selected extensively for manufactured productsVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 2 ～ 12 0.2 ～ 1 Aluminum[◎] 5 ～ 36 2 Radius 40 ～ 80 4 ～ 12 23 ～ 50 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
MISUMI
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughnessVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 2 ～ 12 0.2 ～ 1 Aluminum[◎] 5 ～ 36 3 Radius 40 ～ 80 4 ～ 12 23 ～ 50 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- R (Regular)
MISUMI
Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
Non-coated manufactured products can be shipped on the 5th day in addition to the stocked productsVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 2 ～ 12 0.2 ～ 1 Aluminum[◎] 5 ～ 36 2 Radius 40 ～ 80 4 ～ 12 23 ～ 50 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- R (Regular)
MISUMI
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
Radius type that's also effective in preventing cutter marksVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 2 ～ 12 0.2 ～ 1 Aluminum[◎] 5 ～ 36 3 Radius 40 ～ 80 4 ～ 12 23 ～ 50 KonfigurovatBěžné datum odeslání:5 pracovních dnů
- Volume Discount
- DIA
- Graphite
- 4 Flutes
- Long
MISUMI
Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model
The diamond coated radius shape that's ideal for shaping graphiteVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 6 ～ 12 0.5 ～ 3 Aluminum[◎] 30 ～ 60 4 Radius 150 ～ 200 6 ～ 12 60 ～ 85 KonfigurovatCena (bez DPH) od:166.75 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- R (Regular)
MISUMI
Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model
Small radius type that prevents cutter marks on resinVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 10 0.2 Aluminum[○] 3 ～ 30 2 Radius 50 ～ 80 3 ～ 10 - KonfigurovatCena (bez DPH) od:44.46 €Běžné datum odeslání:5 pracovních dnů
- Non-Coated
- General Steel
MISUMI
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
[Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 20 0.1 ～ 3 Aluminum[○] 4 ～ 60 2 ～ 4 Radius 40 ～ 125 4 ～ 20 - KonfigurovatBěžné datum odeslání:7 pracovních dnů
- Volume Discount
MISUMI
XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model
Introducing the short type in the 4-flute radius for high-efficiency and high-speed machiningVíce informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 2 ～ 20 0.2 ～ 3 Aluminum[◎] 4 ～ 45 4 Radius 50 ～ 110 4 ～ 20 - KonfigurovatCena (bez DPH) od:17.06 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
VAC Series Carbide 2-Flute Radius End Mill
[Features] -Cutting edge radius also reinforced cutting edge rigid-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 12 0.1 ～ 3 Aluminum[○] 2.5 ～ 30 2 Radius 50 ～ 130 6 ～ 12 - KonfigurovatCena (bez DPH) od:49.28 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
VAC Series Carbide 2-Flute Long Neck Radius End Mill
[Features] -Effective for deep cutting due to long neck-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Cutting edge radius also reinforced cutting edge stiff-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 0.4 ～ 12 0.1 ～ 1 Aluminum[○] 0.6 ～ 18 - Long-Neck Radius 40 ～ 100 4 ～ 12 2 ～ 50 KonfigurovatCena (bez DPH) od:38.08 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill
[Features] -Effective for deep cutting due to long neck type-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can process heat treated steel up to 50HRC-Cutting edge radius also reinforced cutting edge rigid-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 1 ～ 12 0.2 ～ 1 Aluminum[○] 1.5 ～ 30 4 Long-Neck Radius 50 ～ 110 4 ～ 12 4 ～ 50 KonfigurovatCena (bez DPH) od:40.28 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
NACHI(FUJIKOSHI)
End-mill for aluminum and copper alloys. R part processing of corner of the groove is possible.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 3 0.2 Aluminum[◎] 8 2 Radius 45 6 - KonfigurovatCena (bez DPH) od:95.67 €Běžné datum odeslání:6 pracovních dnů
OSG
2-Flute Corner R Short GX-CR-EDS-SF
Mushroom shape super hard corner radius end mills developed for shrink fitting.Více informacíBlade diameter (D)(φ) R Size(mm) work material Blade length (ℓ)(mm) Number of flutes(sheet) Type Overall Length (L)(mm) Shank diameter (d)(mm) Underneck length (ℓ1)(mm) 12 0.5 Aluminum[○] 12 2 Radius 34 6 - KonfigurovatCena (bez DPH) od:68.32 €Běžné datum odeslání:6 pracovních dnů
