Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

Replaceable Blade Type Chamfering Tools/Tips/Blades

Spare blade type chamfering tools / tips / blades are cutting tools such as blades, inserts, blades, etc. used for chamfering and their parts. Chamfering is a process that removes burrs by cutting sharp parts of metal, and is essential for making safe products with high accuracy. The main products are replaceable blades such as spot drills, chamfer cutters, counter sinks, etc. With spot drills, there is a type that can perform drill hole positioning and chamfering at one time. The chamfering cutter can be used for chamfering the edges of square objects. The feature of the counter sink is that it can be chamfered easily on a drill press. Each blade can be replaced, eliminating the need for regrinding, resulting in lower costs and higher work reproducibility.
    • Spot Drill Insert

        NINE9

        Spot Drill Insert

        Insert for NC spot drill holders.
        Více informací
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved60 ~ 901–6 ~ 3 to 15General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Single bladeN/ACarbideAvailableTiAlN / TiN / DLC
        Cena (bez DPH) od:
        52.26 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • C-Cutter Boy

          BIG KAISER

          C-Cutter Boy

          [Features] Ideal for chamfering work using a tabletop drilling machine. Clean chamfering can be done using carbide throw-away tips. The carbide guide prevents chattering to allow work to be carried out easily by anyone.
          Více informací
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Chamfering/Horizontal45-General Steel[○] / Cast Iron[○] / Aluminum[○]-N/A---
          Cena (bez DPH) od:
          156.00 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Insert for Engraving Cutter

            NINE9

            Insert for Engraving Cutter

            The special insert design realizes an ultra-long operating life.
            Více informací
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Centering (Positioning) / Engraved45 ~ 600.45~2.1 ~ 0.65~2.7General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○/◎] / Titanium[○] / Copper[○] / Resin[○]Single bladeN/ACarbideAvailableTiAlN / TiN
            Cena (bez DPH) od:
            59.23 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • NC Spot Drill for 90° / Corner Radius Cutter

              NINE9

              NC Spot Drill for 90° / Corner Radius Cutter

              A carbide insert type of NC spot drill. High Efficiency! Low Cost! Ideal for CNC lathes and machining centers. Processing of the corner R is also usable insert.
              Více informací
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Centering (Positioning) / Hole Chamfer9016 ~ 20-Single bladeN/A-N/ANon-Coated
              Cena (bez DPH) od:
              147.08 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Counter Sink (for Outer Diameter Chamfering)

                NOGAJAPAN

                Counter Sink (for Outer Diameter Chamfering)

                [Features]· KOPAL chamfer unit is made of a combination of a body, blade, and guide.· Conical guide serves to align the workpiece, and its height can be adjusted with a spring.· HSS steel blade can be locked with a nut to set the blade projection length.[Applications]· Outer diameter chamfering.· For chamfering end faces of round bars, square rods, etc.
                Více informací
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                ---------
                Cena (bez DPH) od:
                427.35 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Carving Cutter for 60°

                  NINE9

                  Carving Cutter for 60°

                  An innovative carbide insert type engraving tool. High-quality engraving is possible on most material.
                  Více informací
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  Other606-Single bladeN/A-N/ANon-Coated
                  Cena (bez DPH) od:
                  112.23 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Carving Cutter for 45°

                    NINE9

                    Carving Cutter for 45°

                    An innovative carbide insert type engraving tool. High-quality engraving is possible on most material.
                    Více informací
                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                    Other456-Single bladeN/A-N/ANon-Coated
                    Cena (bez DPH) od:
                    112.23 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Throw-Away Tip for C-Cutter Mini

                      BIG KAISER

                      Throw-Away Tip for C-Cutter Mini

                      Throw-away insert for "C-Cutter Mini" high performance chamfering cutters that achieve ultra-high feed rates and a compact size.
                      Více informací
                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                      Hole Chamfer / Chamfering/Horizontal--General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]---AvailableOther
                      Cena (bez DPH) od:
                      14.64 €
                      Běžné datum odeslání:
                      5 pracovních dnů
                      Konfigurovat
                    • High Speed Coating for Center Boy Throwaway Bit

                        BIG KAISER

                        High Speed Coating for Center Boy Throwaway Bit【5 kusů】

                        [Features]· Shows outstanding sharpness as it has a cutting edge with precision finishing.· Because it is a disposable item with replaceable edge, it does not require regrinding and always performs smoothly.
                        Více informací
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Centering (Positioning) / Hole Chamfer90-General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AHigh-speed steelAvailableTiN
                        Cena (bez DPH) od:
                        109.37 €
                        Běžné datum odeslání:
                        8 pracovních dnů
                        Konfigurovat
                      • NC Spot Drill for 90°

                          NINE9

                          NC Spot Drill for 90°

                          Carbide insert type NC spot drill. High efficiency. Low cost. For CNC lathe, CNC lathe, machining center
                          Více informací
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Centering (Positioning) / Hole Chamfer906-Single bladeN/ACarbideN/ANon-Coated
                          Cena (bez DPH) od:
                          153.50 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • Mini Momi

                            FUJIGEN

                            Mini Momi

                            [Features]· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.
                            Více informací
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Centering (Positioning) / Chamfering/Horizontal909General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                            Cena (bez DPH) od:
                            151.75 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Momimen
                            • Volume Discount

                            FUJIGEN

                            Momimen

                            [Features]· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.
                            Více informací
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Centering (Positioning) / Chamfering/Horizontal90 ~ 11813.5 ~ 16.15General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                            Cena (bez DPH) od:
                            144.46 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Machining Bit
                            • Volume Discount
                            • Stock

                            FUJIGEN

                            Machining Bit

                            [Features]· For drilling machines. Excellent sharpness is provided due to high-speed steel tip with breaker.· Lineup of 30°, 45°, and 60° types.
                            Více informací
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Chamfering/Horizontal30 ~ 6021.77 ~ 67.94-Single bladeN/A-N/ANon-Coated
                            Cena (bez DPH) od:
                            136.04 €
                            Běžné datum odeslání:
                            8 pracovních dnů
                            Konfigurovat
                          • For Uratorimen-C

                              FUJIGEN

                              For Uratorimen-C

                              One insert for Uratrimen-C (for M8).[Features]For chamfering the back.
                              Více informací
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Chamfering/Horizontal--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                              Cena (bez DPH) od:
                              29.21 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • C-Cutter Mini, 1-Flute Front-Chamfering Type

                                BIG KAISER

                                C-Cutter Mini, 1-Flute Front-Chamfering Type

                                [Features]· 1-flute type front chamfering "C-Cutter Mini" high performance chamfering cutter that achieves ultra-high feed rates and a compact size.· Ultra-high feed machining achieves dramatic reductions in chamfering time.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Chamfering/Horizontal30 ~ 60---N/A---
                                Cena (bez DPH) od:
                                90.00 €
                                Běžné datum odeslání:
                                6 pracovních dnů
                                Konfigurovat
                              • Disposable Tip for R-Cutter

                                  BIG KAISER

                                  Disposable Tip for R-Cutter

                                  [Features] It can be used for cutters for chamfering curved surfaces. [Features] The coating is carbide and 4 corners can be used.
                                  Více informací
                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                  Round Chamfer45°-General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]Single bladeN/A-AvailableOther
                                  Cena (bez DPH) od:
                                  38.59 €
                                  Běžné datum odeslání:
                                  10 pracovních dnů
                                  Konfigurovat
                                • C-Cutter, Straight Shank

                                    BIG KAISER

                                    C-Cutter, Straight Shank

                                    [Features]· Aggregation of chamfering tools is enabled with the C-Cutter, suitable for a wide range of applications.· A dedicated design for chamfering, this insert has a large rake angle and provides beautiful chamfering.· The wide machining range can reduce the number of tools inside the magazine to greatly improve the ATC loss time.
                                    Více informací
                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                    Chamfering/Horizontal5~85 ~ 60---N/A---
                                    Cena (bez DPH) od:
                                    95.00 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • NC Spot Drill for 60°

                                      NINE9

                                      NC Spot Drill for 60°

                                      A carbide insert type of NC spot drill. High Efficiency! Low Cost! For Use with CNC Lathes, CNC Combined Lathe, Machining Centers
                                      Více informací
                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      Centering (Positioning) / Hole Chamfer6016-Single bladeN/A-N/ANon-Coated
                                      Cena (bez DPH) od:
                                      161.70 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat
                                    • NC Spott Drill for 90° / Engraving Cutter

                                        NINE9

                                        NC Spott Drill for 90° / Engraving Cutter

                                        A carbide insert type of NC spot drill. High Efficiency! Low Cost! Ideal for CNC lathes and machining centers. Engraved cutter insert is also used.
                                        Více informací
                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                        Centering (Positioning) / Hole Chamfer9010-Single bladeN/A-N/ANon-Coated
                                        Cena (bez DPH) od:
                                        130.13 €
                                        Běžné datum odeslání:
                                        6 pracovních dnů
                                        Konfigurovat
                                      • Momimen Nano
                                        • Volume Discount

                                        FUJIGEN

                                        Momimen Nano

                                        [Features]· Smallest class in the industry. A screw-on type, the smallest class in the industry thanks to its industry-smallest class tip (underneck diameter of φ6 mm).· Interference of vise, clamp and the like can be avoided.· Capable of machining previously unreachable locations.
                                        Více informací
                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                        Centering (Positioning) / Chamfering/Horizontal90 ~ 1206 ~ 7.4General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                        Cena (bez DPH) od:
                                        143.60 €
                                        Běžné datum odeslání:
                                        8 pracovních dnů
                                        Konfigurovat
                                      • Decamomi
                                        • Volume Discount

                                        FUJIGEN

                                        Decamomi

                                        [Features]· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.
                                        Více informací
                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                        Centering (Positioning) / Chamfering/Horizontal90 ~ 12022.5 ~ 26.6General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                        Cena (bez DPH) od:
                                        209.92 €
                                        Běžné datum odeslání:
                                        6 pracovních dnů
                                        Konfigurovat
                                      • 60° Momimen

                                          FUJIGEN

                                          60° Momimen

                                          [Features]· A throw-away type requiring only a tip change (no tool correction required).· This tool allows C-chamfering and conical gouging, while reducing the number of tools used in ATC tool changes, and improving machining speed and productivity.· The shank diameter is φ16 and the cutting edge diameter is φ12, making it suitable for 60° chamfering in tight spaces.
                                          Více informací
                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                          Centering (Positioning) / Chamfering/Horizontal6011.88General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                          Cena (bez DPH) od:
                                          185.50 €
                                          Běžné datum odeslání:
                                          8 pracovních dnů
                                          Konfigurovat
                                        • Mini Eco

                                            FUJIGEN

                                            Mini Eco

                                            [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life
                                            Více informací
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning) / Chamfering/Horizontal90 ~ 12010.3 ~ 12.3General Steel[○] / Stainless Steel[○] / Cast Iron[○]Single bladeN/A-N/ANon-Coated
                                            Cena (bez DPH) od:
                                            101.27 €
                                            Běžné datum odeslání:
                                            8 pracovních dnů
                                            Konfigurovat
                                          • Momi Eco

                                              FUJIGEN

                                              Momi Eco

                                              [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life
                                              Více informací
                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                              Centering (Positioning) / Chamfering/Horizontal90 ~ 12014.2 ~ 17.1General Steel[○] / Stainless Steel[○] / Cast Iron[○]Single bladeN/A-N/ANon-Coated
                                              Cena (bez DPH) od:
                                              144.46 €
                                              Běžné datum odeslání:
                                              8 pracovních dnů
                                              Konfigurovat
                                            • Ecomen

                                                FUJIGEN

                                                Ecomen

                                                [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life
                                                Více informací
                                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                Centering (Positioning) / Chamfering/Horizontal90 ~ 12022 ~ 26.6General Steel[○] / Stainless Steel[○] / Cast Iron[○]Single bladeN/A-N/ANon-Coated
                                                Cena (bez DPH) od:
                                                179.22 €
                                                Běžné datum odeslání:
                                                8 pracovních dnů
                                                Konfigurovat
                                              • Mini Eco 2

                                                  FUJIGEN

                                                  Mini Eco 2

                                                  [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life
                                                  Více informací
                                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                  Chamfering/Horizontal30 ~ 6016.5 ~ 18.6General Steel[○] / Stainless Steel[○] / Cast Iron[○]Single bladeN/A-N/ANon-Coated
                                                  Cena (bez DPH) od:
                                                  177.54 €
                                                  Běžné datum odeslání:
                                                  8 pracovních dnů
                                                  Konfigurovat
                                                • Momi Eco 2

                                                    FUJIGEN

                                                    Momi Eco 2

                                                    [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life
                                                    Více informací
                                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                    Chamfering/Horizontal30 ~ 6022.3 ~ 25.3General Steel[○] / Stainless Steel[○] / Cast Iron[○]Single bladeN/A-N/ANon-Coated
                                                    Cena (bez DPH) od:
                                                    236.52 €
                                                    Běžné datum odeslání:
                                                    8 pracovních dnů
                                                    Konfigurovat
                                                  • Ecomen 2

                                                      FUJIGEN

                                                      Ecomen 2

                                                      [Features]· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.· Improved tip shape and cutting edge specification improve machinability and chip discharge.· Ultrafine particle base material has a new coating for a long service life
                                                      Více informací
                                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                      Chamfering/Horizontal30 ~ 6034.1 ~ 36.9General Steel[○] / Stainless Steel[○] / Cast Iron[○]Single bladeN/A-N/ANon-Coated
                                                      Cena (bez DPH) od:
                                                      399.29 €
                                                      Běžné datum odeslání:
                                                      9 pracovních dnů
                                                      Konfigurovat
                                                    • Chamfering Cutter
                                                      • Volume Discount

                                                      FUJIGEN

                                                      Chamfering Cutter

                                                      [Features]· Wide variety. Angle can be selected from 15° to 75° (5° increments) according to applications.· Tips are available in many types to support diverse workpieces.
                                                      Více informací
                                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                      Chamfering/Horizontal15 ~ 7029.9 ~ 37.9General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                      Cena (bez DPH) od:
                                                      399.29 €
                                                      Běžné datum odeslání:
                                                      9 pracovních dnů
                                                      Konfigurovat
                                                    • Young Men

                                                        FUJIGEN

                                                        Young Men

                                                        [Features]· C15 chamfering. An excellent finish without chattering after one round of chamfering.· Chamfering performance next only to that of "Gentlemen" at a price equivalent to "Chamfering Cutter".
                                                        Více informací
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Chamfering/Horizontal30 ~ 6058.2 ~ 62.2General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                        Cena (bez DPH) od:
                                                        305.46 €
                                                        Běžné datum odeslání:
                                                        8 pracovních dnů
                                                        Konfigurovat
                                                      • Gentlemen
                                                        • Volume Discount

                                                        FUJIGEN

                                                        Gentlemen

                                                        [Features]· The longest blade length. It is also possible to machine difficult-to-cut materials with a unique breaker with a tip blade length of 30 mm.· Available in 13 angles from 15° to 75°.
                                                        Více informací
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Chamfering/Horizontal15 ~ 7550.7 ~ 73.3General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                        Cena (bez DPH) od:
                                                        614.29 €
                                                        Běžné datum odeslání:
                                                        9 pracovních dnů
                                                        Konfigurovat
                                                      • Kame Cutter

                                                          FUJIGEN

                                                          Kame Cutter

                                                          [Features]· Reduction of work time. : The special tip shape enables high-feed processing
                                                          Více informací
                                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                          Chamfering/Horizontal4534.9General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                          Cena (bez DPH) od:
                                                          375.21 €
                                                          Běžné datum odeslání:
                                                          9 pracovních dnů
                                                          Konfigurovat
                                                        • Ryanmencut V
                                                          • Volume Discount

                                                          FUJIGEN

                                                          Ryanmencut V

                                                          [Features]· Simultaneous chamfering. : Can be used for front and back chamfering, as well as side V-grooving
                                                          Více informací
                                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                          Chamfering/Horizontal / V Groove4519.5 ~ 45.6General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                          Cena (bez DPH) od:
                                                          223.27 €
                                                          Běžné datum odeslání:
                                                          9 pracovních dnů
                                                          Konfigurovat
                                                        • Uratorimen-C

                                                            FUJIGEN

                                                            Uratorimen-C

                                                            The chipbreaker insert provides excellent sharpness.Since the insert is replaceable, it does not need to be reground.
                                                            Více informací
                                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                            Chamfering/Horizontal456.2 ~ 14General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                            Cena (bez DPH) od:
                                                            183.04 €
                                                            Běžné datum odeslání:
                                                            8 pracovních dnů
                                                            Konfigurovat
                                                          • Multi Angle Mill

                                                              FUJIGEN

                                                              Multi Angle Mill

                                                              [Features]· Variable angle type. : Features a serrated structure and double-clamp mechanism that provides good part retention and prevents tip movement during machining.· 0° to 90° at 5° pitch for easy, reliable angle adjustment
                                                              Více informací
                                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                              Chamfering/Horizontal / V Groove0–90-General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                              Cena (bez DPH) od:
                                                              507.98 €
                                                              Běžné datum odeslání:
                                                              9 pracovních dnů
                                                              Konfigurovat
                                                            • Menmen

                                                                FUJIGEN

                                                                Menmen

                                                                [Features]· Small diameter type. Small diameter type supporting smaller diameter machining than conventional chamfer cutters.· Angle can be selected from 15° to 75° (5° increments) according to applications.· Tips are available in many materials to support diverse workpieces.
                                                                Více informací
                                                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                Chamfering/Horizontal15 ~ 7513.5 ~ 18.2General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                                Cena (bez DPH) od:
                                                                152.26 €
                                                                Běžné datum odeslání:
                                                                8 pracovních dnů
                                                                Konfigurovat
                                                              • Baitender

                                                                  FUJIGEN

                                                                  Baitender

                                                                  [Features]· Turning tool type. Telescopic turning tool enables a wide range of chamfering.· Hole chamfering capacity: φ28 mm - φ134 mm.· Uses the T32 type tip.
                                                                  Více informací
                                                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                  Chamfering/Horizontal4549.85~134.6General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                                  Cena (bez DPH) od:
                                                                  331.91 €
                                                                  Běžné datum odeslání:
                                                                  9 pracovních dnů
                                                                  Konfigurovat
                                                                • Baitender Dedicated Arm

                                                                    FUJIGEN

                                                                    Baitender Dedicated Arm

                                                                    It is a special accessory for the Baitender.With the telescopic cutter, a wide range of chamfering is possible.
                                                                    Více informací
                                                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                    Chamfering/Horizontal4516General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                                    Cena (bez DPH) od:
                                                                    124.85 €
                                                                    Běžné datum odeslání:
                                                                    9 pracovních dnů
                                                                    Konfigurovat
                                                                  • R Cutting Bit

                                                                      FUJIGEN

                                                                      R Cutting Bit

                                                                      [Features]· Easy rounding change: Various round chamfering is possible by exchanging the tip.
                                                                      Více informací
                                                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                      Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                                      Cena (bez DPH) od:
                                                                      306.98 €
                                                                      Běžné datum odeslání:
                                                                      6 pracovních dnů
                                                                      Konfigurovat
                                                                    • R Special Jr.

                                                                        FUJIGEN

                                                                        R Special Jr.

                                                                        Single-action interchangeable insert for round chamfering from R0.5 to R5 and also for small diameter round chamfering.Using Fujigen's unique negative/positive method, it is possible to cut R5 in a single operation.
                                                                        Více informací
                                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                        Round Chamfer-25General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                                        Cena (bez DPH) od:
                                                                        164.97 €
                                                                        Běžné datum odeslání:
                                                                        8 pracovních dnů
                                                                        Konfigurovat
                                                                      • R Special

                                                                          FUJIGEN

                                                                          R Special

                                                                          Replaceable insert for round chamfering from R0.5 to R5.Carbide insert that can be used on 4 sides with 1 insert.
                                                                          Více informací
                                                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                          Round Chamfer-56General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                                          Cena (bez DPH) od:
                                                                          462.82 €
                                                                          Běžné datum odeslání:
                                                                          8 pracovních dnů
                                                                          Konfigurovat
                                                                        • R-Nouveau Jr.

                                                                            FUJIGEN

                                                                            R-Nouveau Jr.

                                                                            Single-flute interchangeable insert for round chamfering from R5 to R10.Fujigen's original negative/positive method is used, making it possible to cut R10 in a single pass, even with compact machining.
                                                                            Více informací
                                                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                            Round Chamfer-35.4General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                                            Cena (bez DPH) od:
                                                                            205.62 €
                                                                            Běžné datum odeslání:
                                                                            9 pracovních dnů
                                                                            Konfigurovat
                                                                          • R-Nouveau

                                                                              FUJIGEN

                                                                              R-Nouveau

                                                                              Various round chamfering is possible by exchanging the tip.
                                                                              Více informací
                                                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                              Round Chamfer-69.2General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                                              Cena (bez DPH) od:
                                                                              445.48 €
                                                                              Běžné datum odeslání:
                                                                              8 pracovních dnů
                                                                              Konfigurovat
                                                                            • RC Hand Cutter

                                                                                FUJIGEN

                                                                                RC Hand Cutter

                                                                                Round chamfering and C chamfering of R1, R2 and R3 are possible by replacing the insert.The unique insert replacement process makes insert replacement fast and accurate.
                                                                                Více informací
                                                                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                                Round Chamfer-25General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                                                Cena (bez DPH) od:
                                                                                164.97 €
                                                                                Běžné datum odeslání:
                                                                                8 pracovních dnů
                                                                                Konfigurovat
                                                                              • Ryanmencut R

                                                                                  FUJIGEN

                                                                                  Ryanmencut R

                                                                                  [Features]· Front and back round and corner chamfering possible. Back and front C chamfering is also possible by exchanging the tip.· Mini R is for front only.· Uses a tip that allows 8 corners to be used.
                                                                                  Více informací
                                                                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                                  Round Chamfer-30 ~ 48General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                                                                                  Cena (bez DPH) od:
                                                                                  352.62 €
                                                                                  Běžné datum odeslání:
                                                                                  9 pracovních dnů
                                                                                  Konfigurovat