Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Výrobce
  • ATOM Drill Bits(Coating Y/N:Available)

    • Micro Drill, for Stainless Steel
      • SLEVA

      ATOM

      Micro Drill, for Stainless Steel

      Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.1 ~ 31 ~ 15General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[◎]Carbide38 ~ 45End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
      Cena (bez DPH) od:
      37.72 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Micro Drill "NEO PRO" Long Blades
      • SLEVA
      • Volume Discount

      ATOM

      Micro Drill "NEO PRO" Long Blades

      A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.03 ~ 30.6 ~ 40General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38 ~ 65End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
      Cena (bez DPH) od:
      46.50 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Standard Solid Drill with Coating
      • SLEVA
      • Volume Discount

      ATOM

      Standard Solid Drill with Coating

      ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.3 ~ 64 ~ 40General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎]Carbide30 ~ 80Straight ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      22.38 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Micro Drill "NEO PRO" Short Blades
      • SLEVA
      • Volume Discount

      ATOM

      Micro Drill "NEO PRO" Short Blades

      A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.1 ~ 2.990.6 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
      Cena (bez DPH) od:
      34.33 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Micro Drill "NEO PRO" Standard Blade Length
      • SLEVA
      • Volume Discount

      ATOM

      Micro Drill "NEO PRO" Standard Blade Length

      A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.03 ~ 30.3 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38 ~ 50End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
      Cena (bez DPH) od:
      34.30 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Micro Drill "NEO PRO" Semi-Long Blades
      • SLEVA

      ATOM

      Micro Drill "NEO PRO" Semi-Long Blades

      A series that achieves stable long life developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.04 ~ 0.990.6 ~ 11General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
      Cena (bez DPH) od:
      41.11 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat