HALDER Clamping Levers
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Recommendation
Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.
· The threaded part can be replaced.
· Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
· No scratches formed on the applicable parts as the seat surface does not move.
· A high amount of pretension can be applied to the threaded part so it will not readily loosen.- 3D CAD data available
Starting from∗ ： 22.38 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Recommendation
Eccentric Quick Clamp Lever Nut Included
HALDER
[Features]
· Enables quick and reliable attaching and detaching of components.
· Adjustable type uses the lock nut to adjust the direction the lever faces.- 3D CAD data available
Starting from∗ ： 8.69 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Eccentric Quick Clamp Lever Screw Included
HALDER
[Features]
· Enables quick and reliable attaching and detaching of components.
· Adjustable type uses the lock nut to adjust the direction the lever faces.- 3D CAD data available
Starting from∗ ： 10.44 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamping Catch
HALDER
[Features]
· There is a spacer and washer under the cam disk so the lever can easily be rotated to the desired position even if the securing bolt is tightened.
· Left rotation type can also be provided through special order.- 3D CAD data available
Starting from∗ ： 55.28 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cam Clamp
HALDER
[Features]
· Clamp lever position can be freely changed based on selection.
· If the thrust washer is removed, this can be used as an infinitely adjustable stopper.
· Left rotation type can also be provided through special order.- 3D CAD data available
Starting from∗ ： 56.84 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Position Adjustable Clamping Lever Screw Included
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.
· The threaded part can be replaced.- 3D CAD data available
Starting from∗ ： 7.46 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Swing Clamp Size 40
HALDER
[Features]
· The clamp can be tightened quickly using the bolt or clamp lever or eccentric lever
· Swiveling the clamp arm to the right or left enables simple and quick replacement of the work.
· Clamp position is infinitely adjustable through use of the positioning ring EH23310.0350 and the clamp arm can be brought repeatedly to the same position.
· If a positioning ring is used, dimension h2 gets 7 mm larger (spoke s gets smaller by 7 mm).
· Compact, so clamping is feasible in a narrow space.
· Clamping at a high position is simple using the height adjustment cylinder.- 3D CAD data available
Starting from∗ ： 247.66 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Quick Clamp, Clamp Lever Included
HALDER
[Features]
· This quick clamp tights work to the fixed surface while also supporting the work facing down.
· Low profile design and so is suitable for machining the entire surface of the work.- 3D CAD data available
Starting from∗ ： 174.33 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamp Nut Lever Weld Type
HALDER
[Features] cheaper version of DIN99. [Clamp Type] Clamping mechanism, "working direction" horizontal.- 3D CAD data available
Starting from∗ ： 3.69 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cam Clamp Module Shaft Hole Type
HALDER
[Features]
· Clamp effect is the same at any angle; self-locking.- 3D CAD data available
Starting from∗ ： 12.53 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Eccentric Lever Shaft Pin Included
HALDER
[Features]
· Operating temperature range: plastic grip type maximum 60°C.- 3D CAD data available
Starting from∗ ： 28.95 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Clamp Nut Lever Weld, Double Lever
HALDER
[Features] Double lever, can be operated with both hands. [Type of mounting part] Female thread.- 3D CAD data available
Starting from∗ ： 5.62 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Swing Clamp Low Profile Type, Size 44
HALDER
[Features]
· The clamp can be tightened quickly using the bolt or clamp lever or eccentric lever
· Swiveling the clamp arm to the right or left enables simple and quick replacement of the work.
· Clamp position is infinitely adjustable through use of the positioning ring EH23310.0350 and the clamp arm can be brought repeatedly to the same position.
· If a positioning ring is used, dimension h2 gets 7 mm larger (spoke s gets smaller by 7 mm).
· Compact, so clamping is feasible in a narrow space.
· Clamping at a high position is simple using the height adjustment cylinder.- 3D CAD data available
Starting from∗ ： 190.24 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
For Positioning Ring Swing Clamp Size 40
HALDER
[Features]
· After setting the swing clamp, the positioning ring is set to the main body and secured using a set screw.
· With this ring, the clamp position of the swing clamp can be retained in a prescribed position.
· The positioning ring direction can be mounted 360 degrees in any direction.
· After mounting, the rotation angle of the swing clamp will be set 110 degrees to the right or to the left.
· The clamp arm is pulled in to mount the positioning ring to the swing clamp.- 3D CAD data available
Starting from∗ ： 40.50 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Position Adjustable Clamping Lever Nut Included Thrust Bearing Included
HALDER
[Features]
· Clamping lever enabling adjusting the lever position.
· Internal parts are made of stainless steel.
· Has a variety of uses including for medical devices and in the chemical industry.
· When the lever is pulled up the serrations disengage, letting you freely change the lever position.
· If the lever is released, it returns to meshed status.
· The threaded part can be replaced.
· Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
· No scratches formed on the applicable parts as the seat surface does not move.
· A high amount of pretension can be applied to the threaded part so it will not readily loosen.- 3D CAD data available
Starting from∗ ： 19.72 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Double Side Eccentric Lever Shaft Pin Included
HALDER
[Features]
· Can be clamped in both directions.
· Used in combination with DIN444 eye bolt M12 (EH22980).- 3D CAD data available
Starting from∗ ： 69.89 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Swing Clamp Size 25
HALDER
[Features]
· The clamp can be tightened quickly using the bolt or clamp lever or eccentric lever
· Swiveling the clamp arm enables simple exchange of work pieces.
· Compact, so clamping is feasible in a narrow space.
· Supports necessary clamp heights using a height adjustment cylinder etc.- 3D CAD data available
Starting from∗ ： 160.33 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included, Made Of Stainless Steel
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
· If the lever is released, it returns to meshed status.
· The threaded part can be replaced.
· Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
· No scratches formed on the applicable parts as the seat surface does not move.
· A high amount of pretension can be applied to the threaded part so it will not readily loosen.- 3D CAD data available
Starting from∗ ： 39.39 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Position Adjustable Clamping Lever Screw Included, Internal Parts, Stainless Steel
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
· If the lever is released, it returns to meshed status.
· Threaded part can be replaced
· Internal parts are made of stainless steel.
[Applications]
· Clamping lever for adjusting lever position.
· Has a variety of uses including for medical devices and in the chemical industry.- 3D CAD data available
Starting from∗ ： 9.63 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
For Axle Pin Eccentric Lever
HALDER
[Features] Used together with parts such as eccentric lever EH23390.- 3D CAD data available
Starting from∗ ： 3.83 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Adjustable Flat Clamping Levers / EH 24441 / d1 32,40mm / Black, Silver
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: Black, Silver
・d₁(mm): 32, 40Starting from∗ ： 13.97 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Lever
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.- 3D CAD data available
Starting from∗ ： 12.80 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Swing Clamp Size 60
HALDER
[Features]
· Clamping feasible through quick tightening using a bolt and eccentric lever.
· Swiveling of the clamp arm enables simple and quick exchange of work pieces.
· Compact, so clamping is feasible in a narrow space.
· Clamping at a high position is simple using the height adjustment cylinder.- 3D CAD data available
Starting from∗ ： 448.68 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
No Hold Down Clamp Lever
HALDER
[Features]
· When the ball type set screw is tightened the work piece is pushed to the side and at the same time held down.
· A large force in the sideways direction is applied through use of appropriate leverage.- 3D CAD data available
Starting from∗ ： 148.59 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
No Hold Down Clamp Lever, Base Included
HALDER
[Features]
· When the ball type set screw is tightened the work piece is pushed to the side and at the same time held down.
· A large force in the sideways direction is applied through use of appropriate leverage.- 3D CAD data available
Starting from∗ ： 236.64 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Lever DIN99
HALDER
[Features] Operating parts. [Material] Steel, black oxide coating/stainless steel 1.4305 (corresponds to EN 1.4305 Equiv.), sandblasted.- 3D CAD data available
Starting from∗ ： 6.38 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Position Adjustable Clamping Lever
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.- 3D CAD data available
Starting from∗ ： 19.15 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Position Adjustable Clamping Lever Nut Included
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.
· The threaded part can be replaced.- 3D CAD data available
Starting from∗ ： 7.00 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Position Adjustable Clamping Lever Nut Included, Internal Parts, Made Of Stainless Steel
HALDER
[Features]
· Clamping lever enabling adjusting the lever position.
· Internal parts are made of stainless steel.
· Has a variety of uses including for medical devices and in the chemical industry.
· When the lever is pulled up the serrations disengage, letting you freely change the lever position.
· If the lever is released, it returns to meshed status.
· The threaded part can be replaced.- 3D CAD data available
Starting from∗ ： 8.98 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Module For Securing With Screw Hole For Attaching Lever
HALDER
[Features]
· Enables quick securing to a shaft providing a base to attach the lever.- Volume Discount
- 3D CAD data available
Starting from∗ ： 11.28 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Holding Plates Quick-Release For Down-Hold Clamps
HALDER
[Features]
· Using this mounting plate it is possible to mount downhold clamps, etc. to the T groove at any angle and position.- 3D CAD data available
Starting from∗ ： 83.10 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Clamping Levers, with clamping screw
HALDER
[Operation]
By lifting the lever, the serrations are disengaged. The lever can be positioned by the serrations. On releasing the lever, the serrations are automatically re-engaged.Starting from∗ ： 9.69 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Flat Clamping Levers with Female Thread, Smooth Bore / EH 24441. / d1 32, 40mm / Black, Silver
HALDER
Adjustable flat clamping levers are used when the swivel range is limited or a specific lever position is required.
Adjustable flat clamping levers are characterised by their low construction height and are particularly suitable for use in restricted spaces or when the lever should not overhang..
[Operation]
By lifting the lever, the serrations are disengaged. The lever can be positioned by the serrations. On releasing the lever, the serrations are automatically re-engaged.Starting from∗ ： 13.97 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Clamping Levers, clamping screw / ball-headed mm / / mm / orange
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: orange
・d₁(mm): 14, 18
Adjustable clamping levers find versatile applications when the area of use is confined or aspecific lever position is required.
[Features]
・Ball-headed-picture 3, orangeStarting from∗ ： 12.12 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Flat Clamping Levers, screw, stainless steel mm / / mm / silver
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: Silver
・d₁(mm): 32, 40
Adjustable flat tension levers are used when the swivel range is limited or a specific lever position is required.
Adjustable flat tension levers are characterised by their low construction height and are particularly suitable for use in restricted spaces or when the lever should not overhang.Starting from∗ ： 25.64 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Clamping Levers, clamping screw / with brass thrust pin mm / / mm / black
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: black
・d₁(mm): 14, 18
[Features]
・With brass thrust pin-picture 1, black
・Adjustable clamping levers find versatile applications when the area of use is confined or aspecific lever position is required.Starting from∗ ： 10.14 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Clamping Levers, clamping screw / with thrust pin mm / / mm / black
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: black
・d₁(mm): 14, 18
[Features]
・With thrust pin-picture 2, black
・Adjustable clamping levers find versatile applications when the area of use is confined or aspecific lever position is required.Starting from∗ ： 11.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Clamping Levers, clamping screw / with thrust pin mm / / mm / silver
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: silver
・d₁(mm): 14, 18
[Features]
・With thrust pin-picture 2, silver
・Adjustable clamping levers find versatile applications when the area of use is confined or aspecific lever position is required.Starting from∗ ： 11.60 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Flat Clamping Levers, stainless steel / with smooth bore mm / mm / black
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: black
・d₁(mm): 32, 40
Adjustable flat tension levers are used when the swivel range is limited or a specific lever position.
Adjustable flat tension levers are characterised by their low construction height and are particularly suitable for use in restricted spaces or when the lever should not overhang.
With smooth bore-picture 2, blackStarting from∗ ： 23.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Flat Clamping Levers, stainless steel / with female thread mm / / mm / black
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: black
・d₁(mm): 32, 40
Adjustable flat tension levers are used when the swivel range is limited or a specific lever position.
Adjustable flat tension levers are characterised by their low construction height and are particularly suitable for use in restricted spaces or when the lever should not overhang.
With female thread-picture 1, blackStarting from∗ ： 23.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Flat Clamping Levers, stainless steel / with smooth bore mm / mm / silver
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: silver
・d₁(mm): 32, 40
Adjustable flat tension levers are used when the swivel range is limited or a specific lever position.
Adjustable flat tension levers are characterised by their low construction height and are particularly suitable for use in restricted spaces or when the lever should not overhang.
With smooth bore-picture 2, silverStarting from∗ ： 23.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Flat Clamping Levers / with female thread mm / / mm / silver
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: silver
・d₁(mm): 32, 40
Adjustable flat tension levers are used when the swivel range is limited or a specific lever positione is required.
Adjustable flat tension levers are characterised by their low construction height and are particularly suitable for use in restricted spaces or when the lever should not overhang.
With female thread-picture 1, silverStarting from∗ ： 13.97 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Clamping Levers, clamping screw / with thrust pin mm / / mm / orange
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: orange
・d₁(mm): 14, 18
Adjustable clamping levers find versatile applications when the area of use is confined or aspecific lever position is required.
[Features]
・With thrust pin-picture 2, orangeStarting from∗ ： 11.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Flat Clamping Levers, stainless steel / with female thread mm / / mm / silver
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: silver
・d₁(mm): 32, 40
Adjustable flat tension levers are used when the swivel range is limited or a specific lever position.
Adjustable flat tension levers are characterised by their low construction height and are particularly suitable for use in restricted spaces or when the lever should not overhang.
With female thread-picture 1, silverStarting from∗ ： 23.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjustable Clamping Levers, clamping screw / ball-headed mm / / mm / silver
HALDER
[Specifications]
・Function: tighten|operate|fasten|clamp|contact|readjust
・Colour: silver
・d₁(mm): 14, 18
Adjustable clamping levers find versatile applications when the area of use is confined or aspecific lever position is required. Ball-headed-picture 3, silverStarting from∗ ： 12.24 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Type Clamp |
| Type operation |
| Operation Direction |
| Shape |
| L-Shaped Clamp Lever Shape |
| Lever Shape with Knob |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| Main Body Surface Treatment |
| Mounting Section Material |
| Mounting Section Surface Treatment |
| Knob Material |
| Surface Treatment of knob |
| Adjustment screw for gap |
| Mounting Section Diameter d(mm) and/or Diameter |
| Mounting Section Length L(mm) |
| Mounting Section Diameter C(mm) |
| Mounting Section Thickness h(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
| Product Series | Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included | Position Adjustable Clamping Lever Nut Included Thrust Bearing Included | Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included, Made Of Stainless Steel | Position Adjustable Clamping Lever Screw Included, Internal Parts, Stainless Steel | Adjustable Flat Clamping Levers / EH 24441 / d1 32,40mm / Black, Silver | Position Adjustable Clamping Lever Nut Included, Internal Parts, Made Of Stainless Steel | Adjustable Clamping Levers, clamping screw / ball-headed mm / / mm / orange | Adjustable Flat Clamping Levers, screw, stainless steel mm / / mm / silver | Adjustable Clamping Levers, clamping screw / with brass thrust pin mm / / mm / black | Adjustable Clamping Levers, clamping screw / with thrust pin mm / / mm / black | Adjustable Clamping Levers, clamping screw / with thrust pin mm / / mm / silver | Adjustable Flat Clamping Levers, stainless steel / with smooth bore mm / mm / black | Adjustable Flat Clamping Levers, stainless steel / with female thread mm / / mm / black | Adjustable Flat Clamping Levers, stainless steel / with smooth bore mm / mm / silver | Adjustable Flat Clamping Levers / with female thread mm / / mm / silver | Adjustable Clamping Levers, clamping screw / with thrust pin mm / / mm / orange | Adjustable Flat Clamping Levers, stainless steel / with female thread mm / / mm / silver | Adjustable Clamping Levers, clamping screw / ball-headed mm / / mm / silver | |||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||
| Starting from∗ | 22.38 € *Unit price with basic configuration | 8.69 € *Unit price with basic configuration | 10.44 € *Unit price with basic configuration | 55.28 € *Unit price with basic configuration | 56.84 € *Unit price with basic configuration | 7.46 € *Unit price with basic configuration | 247.66 € *Unit price with basic configuration | 174.33 € *Unit price with basic configuration | 3.69 € *Unit price with basic configuration | 12.53 € *Unit price with basic configuration | 28.95 € *Unit price with basic configuration | 5.62 € *Unit price with basic configuration | 190.24 € *Unit price with basic configuration | 40.50 € *Unit price with basic configuration | 19.72 € *Unit price with basic configuration | 69.89 € *Unit price with basic configuration | 160.33 € *Unit price with basic configuration | 39.39 € *Unit price with basic configuration | 9.63 € *Unit price with basic configuration | 3.83 € *Unit price with basic configuration | 13.97 € *Unit price with basic configuration | 12.80 € *Unit price with basic configuration | 448.68 € *Unit price with basic configuration | 148.59 € *Unit price with basic configuration | 236.64 € *Unit price with basic configuration | 6.38 € *Unit price with basic configuration | 19.15 € *Unit price with basic configuration | 7.00 € *Unit price with basic configuration | 8.98 € *Unit price with basic configuration | 11.28 € *Unit price with basic configuration Volume Discount | 83.10 € *Unit price with basic configuration | 9.69 € *Unit price with basic configuration | 13.97 € *Unit price with basic configuration | 12.12 € *Unit price with basic configuration | 25.64 € *Unit price with basic configuration | 10.14 € *Unit price with basic configuration | 11.26 € *Unit price with basic configuration | 11.60 € *Unit price with basic configuration | 23.19 € *Unit price with basic configuration | 23.19 € *Unit price with basic configuration | 23.19 € *Unit price with basic configuration | 13.97 € *Unit price with basic configuration | 11.26 € *Unit price with basic configuration | 23.19 € *Unit price with basic configuration | 12.24 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | Same day | Same day | Same day | 4 Days | Same day | Same day | Same day | Same day | 2 Days | 2 Days | Same day | 4 Days | 4 Days | Same day | 3 Days | Same day | Same day | Same day | 2 Days | 4 Days | Same day | Same day | Same day | 4 Days | Same day | Same day | Same day | Same day | 2 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Application | Related Components | Clamp | Clamp | Clamp | Clamp | Related Components | Clamp | Clamp | Related Components | Clamp | Related Components | Related Components | Clamp | Related Components | Related Components | Related Components | Clamp | Related Components | Related Components | Related Components | - | Related Components | Clamp | Clamp | Clamp | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type Clamp | Clamp Mechanism | Cam Mechanism | Cam Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | - | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | - | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type operation | - | N/A | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operation Direction | Horizontal | Vertical | Vertical | Horizontal | Horizontal | Horizontal | - | Horizontal | Horizontal | Horizontal | - | Horizontal | - | - | Horizontal | - | - | Horizontal | Horizontal | Horizontal | - | Horizontal | - | - | - | - | - | Horizontal | Horizontal | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shape | Shape with Knob | L-Shaped | L-Shaped | Shape with Knob | Shape with Knob | Shape with Knob | L-Shaped / T-Shaped | Shape with Knob | Shape with Knob | Other | Shape with Knob | Shape with Knob | L-Shaped / T-Shaped | - | Shape with Knob | Shape with Knob | L-Shaped / T-Shaped | Shape with Knob | Shape with Knob | Other | - | Shape with Knob | L-Shaped / T-Shaped | Other | Other | L-Shaped / Other | L-Shaped | Shape with Knob | Shape with Knob | Shape with Knob | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| L-Shaped Clamp Lever Shape | - | No Set Screw | No Set Screw | - | Set Screw Type | Set Screw Type | Set Screw Type | - | Set Screw Type | - | - | Set Screw Type | Set Screw Type | - | - | - | Set Screw Type | - | - | - | - | Set Screw Type | Set Screw Type | - | - | - | Set Screw Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lever Shape with Knob | - | - | - | Single lever | Single lever | Single lever | Single lever | Single lever | Single lever | - | - | Double Lever | Single lever | - | Single lever | - | Single lever | - | Single lever | - | - | Single lever | Single lever | - | - | Single lever | Single lever | Single lever | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Type | Male thread | Female Thread | Male thread | Male thread | Male thread | Male thread | Female Thread | Round Hole | Female Thread | Round Hole | Round Hole | Female Thread | Female Thread | - | Female Thread | Round Hole | Female Thread | Male thread | Male thread | - | - | Female Thread | Female Thread | Round Hole | Round Hole | Female Thread / Round Hole | Male thread / Female Thread | Female Thread | Female Thread | Female Thread | Female Thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Rotating Radius R(mm) | 62 ～ 108 | 63 ～ 82 | 63 ～ 82 | 109 | 109 | 30 ～ 108 | 108 | - | 60 ～ 152 | - | 114 ～ 157 | 47.5 ～ 118 | 100 | - | 62 ～ 108 | - | 74 ～ 82 | 62 ～ 108 | 30 ～ 108 | - | - | - | 100 | - | - | 48 ～ 190 | - | 30 ～ 108 | 30 ～ 108 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Material | Zinc Alloy | Zinc Alloy | Zinc Alloy | Steel | Steel | Zinc Alloy | Steel | Steel | Steel | Steel | Steel / Zinc Alloy | Steel | Steel | - | Zinc Alloy | Steel | Steel | Zinc Alloy | Zinc Alloy | - | - | Steel | Steel | Steel | Steel | Steel | Steel | Zinc Alloy | Zinc Alloy | Steel | Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Surface Treatment | Other | Other | Other | Nickel Plating / Black Oxide | Nickel Plating / Black Oxide | Other | Black Oxide | Black Oxide | - | Other | - | Other | Black Oxide | - | - | - | Black Oxide | Other | - | - | - | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide / Other | Black Oxide / Other | - | - | Black Oxide | Black Oxide | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Material | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | - | - | - | - | Stainless Steel | - | - | - | Stainless Steel / Steel | - | - | Stainless Steel | Stainless Steel | - | - | - | - | - | - | - | Stainless Steel / Steel | Steel | Stainless Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Surface Treatment | Black Oxide | N/A / Zinc Plating | N/A / Zinc Plating | Electroless Nickel Plating | Electroless Nickel Plating / Black Oxide | Black Oxide | - | - | - | - | - | - | - | - | Black Oxide | - | - | - | - | - | - | - | - | - | - | - | - | Black Oxide | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Knob Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ABS Resin | - | - | - | - | ABS Resin | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment of knob | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Adjustment screw for gap | - | N/A | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Diameter d(mm) and/or Diameter | 6 ～ 12 | 5 ～ 8 | 5 ～ 8 | 10 | 10 | 4 ～ 16 | 12 | 8 ～ 12 | 8 ～ 20 | 8 ～ 12 | 8 ～ 12 | 8 ～ 20 | 12 | - | 6 ～ 12 | 12 | 8 | 6 ～ 12 | 4 ～ 16 | 8 ～ 12 | - | 8 ～ 20 | 12 ～ 16 | 8 ～ 16 | 8 ～ 16 | 6 ～ 24 | 6 ～ 20 | 3 ～ 16 | 3 ～ 16 | 10 ～ 16 | 8 ～ 24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Length L(mm) | 20 ～ 85 | 13 ～ 15 | 16 ～ 60 | - | - | 12 ～ 80 | - | 132 ～ 190 | 63 ～ 160 | - | - | - | - | - | 12.5 ～ 26.5 | - | - | 20 ～ 85 | 12 ～ 80 | 14 ～ 31 | - | - | 65 ～ 69 | 52 ～ 86 | 72.5 ～ 126 | 50 ～ 200 | 11 ～ 80 | 7 ～ 22 | - | 15.5 ～ 19.5 | 100 ～ 220 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Diameter C(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Thickness h(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Application
- Clamp
- Operation
- Related Components
-
Type Clamp
-
Type operation
-
Operation Direction
-
Shape
-
L-Shaped Clamp Lever Shape
-
Lever Shape with Knob
-
Mounting Section Type
- Male thread
- Female Thread
- Round Hole
- Square Hole
-
Rotating Radius R(mm)
- 25
- 26
- 30
- 33.5
- 36.2
- 39
- 39.9
- 40
- 40.1
- 42
- 43
- 44
- 45
- 46.5
- 47.5
- 47.9
- 48
- 50
- 52.3
- 55
- 59.5
- 60
- 62
- 63
- 63.5
- 64
- 64.5
- 64.9
- 65
- 65.2
- 67
- 68
- 70
- 70.4
- 71.5
- 74
- 75
- 75.5
- 76
- 78
- 78.5
- 79
- 79.5
- 80
- 80.2
- 80.3
- 81
- 81.1
- 82
- 83
- 84
- 84.5
- 85
- 87
- 88
- 88.1
- 88.5
- 89
- 90
- 92
- 93
- 94.5
- 95
- 95.4
- 96
- 96.8
- 97
- 99
- 99.9
- 100
- 101
- 102
- 104
- 106
- 108
- 109
- 109.9
- 110
- 110.9
- 111
- 114
- 115
- 118
- 119
- 120
- 121
- 123
- 123.5
- 125
- 126
- 126.5
- 127
- 128
- 128.5
- 130
- 131
- 132
- 134
- 134.5
- 136
- 138
- 140
- 145
- 146
- 148
- 150
- 152
- 157
- 160
- 170
- 180
- 187.5
- 190
- 200
- 230
- 300
- 400
-
Main Body Material
- Stainless Steel
- Steel
- Zinc Alloy
- Polyamide
- Nylon
- Aluminum
- Other
-
Main Body Surface Treatment
-
Mounting Section Material
-
Mounting Section Surface Treatment
-
Knob Material
-
Surface Treatment of knob
-
Adjustment screw for gap
-
Mounting Section Diameter d(mm) and/or Diameter
-
Mounting Section Length L(mm)
-
Mounting Section Diameter C(mm)
-
Mounting Section Thickness h(mm)
Narrow search by specifying Brand
-
- MISUMI (19)
- NORELEM (264)
- KIPP (152)
- ESCO (116)
- GANTER (70)
- HALDER (47)
- KONISHI MFG (30)
- IMAO CORPORATION (25)
- NABEYA BI-TECH (21)
- ELESA (18)
- EUROFLEX (3)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Clamping Levers
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.