MAEDLER Keyless Bushing (Fastening Fittings)（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Taper Bushes 4040
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 74.76 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 4545
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 101.80 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 5050
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 136.07 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Welding Hubs for Taper Bushes
MAEDLER
Material: Steel (St52 or comparable), good weldable.
Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft.
Taper bush and chain plate wheel have to be ordered separately.
Recommended bore tolerance: H8.
Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat.- Volume Discount
Starting from∗ ： 11.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shrink Disks ST-R, Stainless
MAEDLER
Material: Stainless steel 1.4057 (AISI 431).
• For medium torques.
• No axial shaft-hub movement.
• Quick mounting.
• Quick demounting.
• Not self-centering.
• Concentricity 0.02-0.04 mm.- Volume Discount
Starting from∗ ： 49.33 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shrink Disks ST-B
MAEDLER
Material: Steel.
• For high torques.
• No axial shaft-hub movement.
• Quick mounting.
• Quick demounting.
• Not self-centering.- Volume Discount
Starting from∗ ： 15.89 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shrink Disks ST
MAEDLER
Material: High-quality steel.
• For very high torques.
• No axial shaft-hub movement.
• Quick mounting.
• Quick demounting.
• Not self-centering.
• Concentricity 0.02-0.04 mm.- Volume Discount
Starting from∗ ： 19.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Miniature Clamping Bushes MSM-N
MAEDLER
Material: Version MSM-N: Stainless steel 1.4305 (AISI 303).
Concentricity: about 0.02 mm.
Tolerance: Shaft k6-h10, Hub H8.
PW ≈ 90N/mm², PN ≈ 70N/mm²- Volume Discount
Starting from∗ ： 48.25 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Miniature Clamping Bushes MSM
MAEDLER
Material: Version MSM: Mild steel.
Concentricity: about 0.02 mm.
Tolerance: Shaft k6-h10, Hub H8.
PW ≈ 90N/mm², PN ≈ 70N/mm²- Volume Discount
Starting from∗ ： 44.74 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TT 17-35 mm
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For high torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Starting from∗ ： 40.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies SSGK
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For low torques.
• Very short version.
• Also suitable for small hub diameters.
• Not self-centering.
• Not self-locking.
• Axial movement during mounting.- Volume Discount
Starting from∗ ： 12.42 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies SSG
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For low to medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• Axial movement during mounting.- Volume Discount
Starting from∗ ： 15.55 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies (Rigid Couplings) ST-K
MAEDLER
Material: Steel.
• For connecting two shafts, as a rigid coupling.
• For medium torques.
• Easy mounting.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 20.28 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Bushes MSA
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium high torques and axial forces.
• Minimal space requirement.
• Self-centering.
• Not self-locking.
• Little axial movement during mounting.
Concentricity: approx. 0.02 mm.
Tolerance: Shaft h11 up to k6, Hub H7 up to H11.- Volume Discount
Starting from∗ ： 165.62 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Bushes E-N
MAEDLER
Material: Stainless steel 1.405 (AISI 431).
The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression.
Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled.
Concentricity: 0.02 mm.
Tolerances: Shaft h7 for d = 15 mm.
Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.
Shaft h8 for the other diameters d.
Hub H7.
Temperature range: -30 oC to 85 oC.- Volume Discount
Starting from∗ ： 427.52 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Bushes E
MAEDLER
Material: High-quality steel.
The clamping bush consists of a double-walled steel sleeve filledwith a pressure medium, and a flange part. Inside the flange thereis a screw and a piston with seal to build up compression.
Function: When the thrust screw is tightened, the sleeve expandsuniformly against shaft and hub, creating a rigid connectionthrough frictional force. When the thrust screw is loosened, thebush returns to its initial position and can be easily disassembled.
Concentricity: 0.02 mm.
Tolerances: Shaft h7 for d = 15 mm.
Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.
Shaft h8 for the other diameters d.
Hub H7.
Temperature range: -30°C to 85°C.- Volume Discount
Starting from∗ ： 255.76 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(Ø) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(Ø) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | ||||||||||||||||
| Starting from∗ | 74.76 € *Unit price with basic configuration Volume Discount | 101.80 € *Unit price with basic configuration Volume Discount | 136.07 € *Unit price with basic configuration Volume Discount | 11.88 € *Unit price with basic configuration Volume Discount | 49.33 € *Unit price with basic configuration Volume Discount | 15.89 € *Unit price with basic configuration Volume Discount | 19.66 € *Unit price with basic configuration Volume Discount | 48.25 € *Unit price with basic configuration Volume Discount | 44.74 € *Unit price with basic configuration Volume Discount | 40.96 € *Unit price with basic configuration Volume Discount | 12.42 € *Unit price with basic configuration Volume Discount | 15.55 € *Unit price with basic configuration Volume Discount | 20.28 € *Unit price with basic configuration Volume Discount | 165.62 € *Unit price with basic configuration Volume Discount | 427.52 € *Unit price with basic configuration Volume Discount | 255.76 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Centering | - | - | - | - | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided | Not Provided | Provided | Not Provided | Provided | Provided | Provided |
| Body Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft Bore Dia. d(Ø) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque Range(N•m) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Hub Dia. D1(Ø) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Structure | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque(N•m) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Type
-
Flanged -
Straight -
Nut Tightening -
Thin Wall -
Direct Mounting -
Sleeve
-
-
Centering
- Provided
- Not Provided
-
Body Material
- Steel
- Stainless Steel
- Aluminum
- Grey Iron
-
Shaft Bore Dia. d(Ø)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(Ø)
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Narrow search by specifying Brand
-
- MISUMI (6)
- MAEDLER (61)
- RINGFEDER (28)
- CONCAR (26)
- ISEL (10)
- KBK (9)
- SUNGIL (9)
- NORELEM (3)
- KATAYAMA CHAIN (3)
- OPTIBELT (2)
- CAP (2)
- MIKI PULLEY (2)
- HALDER (2)
- Save & Secure (2)
- EVER-ON CORPORATION (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Keyless Bushing (Fastening Fittings)
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.