Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Výrobce

MISUMI Drill Bits(work material:Stainless Steel)

  • TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
    • Volume Discount

    MISUMI

    TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

    [Features] -Ideal for high-precision small-diameter drilling-The shank diameter is standardised at 3 mm and enables high-precision clamping-The combination of super-fine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.
    Více informací
    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
    0.38 ~ 2.76 ~ 12Stainless Steel[○]Carbide38End Mill ShankAvailableTiAlNN/A
    Cena (bez DPH) od:
    36.61 €
    Cena včetně DPH:
    43.57 €
    Běžné datum odeslání:
    5 pracovních dnů
    Konfigurovat
  • TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade
    • Volume Discount

    MISUMI

    TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade

    (DLC-SC-SDR)-Drilling and countersinking holes for screws can be done in one operation, resulting in highly efficient machining (countersink type)-Since relief holes can be drilled at the same time as drilling pilot holes for power strips, it is ideal for drilling pilot holes in thick panels that require relief (single-cut type).
    Více informací
    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
    3.4 ~ 10.321 ~ 72Stainless Steel[○]Carbide73 ~ 136Straight ShankAvailableTiAlNN/A
    Cena (bez DPH) od:
    81.59 €
    Cena včetně DPH:
    97.09 €
    Běžné datum odeslání:
    5 pracovních dnů
    Konfigurovat
  • Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type

      MISUMI

      Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type

      [Features]・Introducing a long shank type with custom pilot diameter / large diameter dimensions to the lineup of customizable step drill bits with helical flutes.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      --Stainless Steel[○]Carbide-End Mill ShankN/A-N/A
      Běžné datum odeslání:
      9 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular

      [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a wavy edge achieves outstanding sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape and R-type thinning-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1328 ~ 77Stainless Steel[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      47.83 €
      Cena včetně DPH:
      56.92 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill, Stub
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Stub

      [Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.3 ~ 62 ~ 28Stainless Steel[○]Carbide38 ~ 66End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      23.28 €
      Cena včetně DPH:
      27.70 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Regular

      [Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, performance range, prices, delivery times, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.3 ~ 133 ~ 77Stainless Steel[○]Carbide38 ~ 124End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      22.57 €
      Cena včetně DPH:
      26.86 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiN Coated High-Speed Steel Drill, End Mill Shank / Stub
      • Volume Discount

      MISUMI

      TiN Coated High-Speed Steel Drill, End Mill Shank / Stub

      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      2 ~ 1312 ~ 51Stainless Steel[○]Cobalt HSS44 ~ 111End Mill ShankAvailableTiNN/A
      Cena (bez DPH) od:
      10.26 €
      Cena včetně DPH:
      12.21 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiN Coated High-Speed Steel Drill, Straight Shank / Regular
      • Volume Discount

      MISUMI

      TiN Coated High-Speed Steel Drill, Straight Shank / Regular【1 až 10 kusů】

      With a wide range of response capabilities for everything from general steel to difficult-to-cut materials, it is capable of deep drilling with a high degree of difficulty
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1 ~ 12.512 ~ 101Stainless Steel[◎]Cobalt HSS34 ~ 151Straight ShankAvailableTiNN/A
      Cena (bez DPH) od:
      13.33 €
      Cena včetně DPH:
      15.86 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TS Coated Carbide Composite Spiral Drill, Stub Model
      • Volume Discount

      MISUMI

      TS Coated Carbide Composite Spiral Drill, Stub Model

      [Features] -Designed with a 30° helix angle near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, delivery times, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1220 ~ 55Stainless Steel[○]Carbide50 ~ 115End Mill ShankAvailable-N/A
      Cena (bez DPH) od:
      100.34 €
      Cena včetně DPH:
      119.40 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)

      [Features] -Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously-Supports a wide range of materials, from general steel to stainless steel-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1320 ~ 71Stainless Steel[○]Carbide62 ~ 124End Mill ShankAvailableTiAlNAvailable / N/A
      Cena (bez DPH) od:
      55.49 €
      Cena včetně DPH:
      66.03 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular

      3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      2 ~ 1312 ~ 77Stainless Steel[○]Carbide46 ~ 124End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      60.30 €
      Cena včetně DPH:
      71.76 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Double Margin Drill, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Double Margin Drill, Regular

      [Features] -Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling-Supports a wide range of materials, from general steel to stainless steel-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1 ~ 1112 ~ 71Stainless Steel[○]Carbide45 ~ 118End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      81.68 €
      Cena včetně DPH:
      97.20 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub

      [Features] -The wavy cutting edge achieves excellent sharpness and strength and promotes chip evacuation-The use of triple rake and R-type thinning achieves high centripetal force-Designed with larger core diameter than TAC-ESDBA to improve durability-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1320 ~ 60Stainless Steel[○]Carbide66 ~ 107End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      43.35 €
      Cena včetně DPH:
      51.59 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

      By applying three rake + R thinning, it demonstrates a high level of afferent.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1328 ~ 77Stainless Steel[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      51.31 €
      Cena včetně DPH:
      61.06 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular

      [Features] -Corner radius treatment suppresses chipping-Wavy flute shape achieves excellent cutting sharpness and strength and promotes chip flow-High centripetal force is achieved by using three chip and R thinning-Combination of ultra-fine grain carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high speed machining-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1316 ~ 77Stainless Steel[○]Carbide49 ~ 124Straight ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      40.76 €
      Cena včetně DPH:
      48.50 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

      [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 820 ~ 41Stainless Steel[○]Carbide62 ~ 79End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      40.39 €
      Cena včetně DPH:
      48.06 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular

      [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning-Suppresses chipping by adopting chamfer treatment on the shoulder-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole tolerance
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      4.2 ~ 724 ~ 53Stainless Steel[○]Carbide66 ~ 91End Mill ShankAvailableTiAlNAvailable
      Cena (bez DPH) od:
      107.05 €
      Cena včetně DPH:
      127.39 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model

      [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a fluted cutting edge achieves outstanding sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1316 ~ 78Stainless Steel[○]Carbide46 ~ 137Straight ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      36.40 €
      Cena včetně DPH:
      43.32 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill, Regular Model with Oil Holes
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Regular Model with Oil Holes

      [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Supports a wide range of materials, from general steel to stainless steel-Achieves excellent strength by adopting a straight cutting edge-Demonstrates high centripetal force by using three chip and X-type thinning-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1328 ~ 77Stainless Steel[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNAvailable
      Cena (bez DPH) od:
      79.21 €
      Cena včetně DPH:
      94.26 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular

      [Features] -MIAutomatic steelI-Original shape ideal for EN 1.4016 Equiv. machining-Designed with a helix angle of 38° near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Superfine carbide alloy provides excellent abrasion resistance and enables high speed machining-125° tip angle and combined helix angle improve cutting performance.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1028 ~ 61Stainless Steel[◎]Carbide60 ~ 120End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      117.87 €
      Cena včetně DPH:
      140.27 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

        MISUMI

        Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

        [Features] -No complicated estimates required. It is possible to order the part number of the step drill without drawings.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        --Stainless Steel[○]Carbide-Straight ShankN/A-N/A
        Běžné datum odeslání:
        12 pracovních dnů
        Konfigurovat
      • TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model
        • Volume Discount

        MISUMI

        TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model

        Sophisticated deep hole drilling that's made possible by well-balanced models that are aimed for the highest standards in high-speed steel
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        2 ~ 1324 ~ 101Stainless Steel[○]Powder high-speed steel56 ~ 161End Mill ShankAvailableTiAlNAvailable / N/A
        Cena (bez DPH) od:
        15.71 €
        Cena včetně DPH:
        18.69 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiN Coated High-Speed Steel Drill for Stainless Steel Machining, Straight Shank / Stub, Regular Model
        • Volume Discount

        MISUMI

        TiN Coated High-Speed Steel Drill for Stainless Steel Machining, Straight Shank / Stub, Regular Model【5 až 10 kusů】

        [Features] -Products are designed for stainless steel machining-Excellent heat resistance due to the combination of cobalt high-speed steel and TiN coating-Special drill shape enables highly efficient drilling.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        2 ~ 1312 ~ 87Stainless Steel[◎]Cobalt HSS44 ~ 137Straight ShankAvailableTiNN/A
        Cena (bez DPH) od:
        53.95 €
        Cena včetně DPH:
        64.20 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiN Coated High-Speed Steel Drill, End Mill Shank / Regular
        • Volume Discount

        MISUMI

        TiN Coated High-Speed Steel Drill, End Mill Shank / Regular

        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        2 ~ 1324 ~ 101Stainless Steel[○]Cobalt HSS56 ~ 161End Mill ShankAvailableTiNN/A
        Cena (bez DPH) od:
        9.96 €
        Cena včetně DPH:
        11.85 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular
        • Volume Discount

        MISUMI

        TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular【1 až 10 kusů】

        [Features] -Demonstrates one of the best cutting performances for general steel, stainless steel, titanium, Inconel, heat resistant alloys and other difficult to cut materials-High spiral shape promotes chip evacuation-X-shaped thinning provides a good bevel and reduces pressure load significantly.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        2 ~ 1324 ~ 101Stainless Steel[◎]Cobalt HSS49 ~ 151Straight ShankAvailableTiNN/A
        Cena (bez DPH) od:
        8.17 €
        Cena včetně DPH:
        9.72 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long
        • Volume Discount

        MISUMI

        TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long

        [Features] -The best cutting performance for general steel, stainless steel, titanium, Inconel, heat resistant alloys and other difficult to cut materials-High spiral shape promotes chip flow.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        2 ~ 1356 ~ 134Stainless Steel[◎]Cobalt HSS85 ~ 205Straight ShankAvailableTiNN/A
        Cena (bez DPH) od:
        17.53 €
        Cena včetně DPH:
        20.86 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub
        • Volume Discount

        MISUMI

        TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub

        · A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel· MISUMI's unique thinning enables excellent center biting
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        1 ~ 9.26 ~ 40Stainless Steel[◎]Powder high-speed steel38 ~ 90End Mill ShankAvailableTiAlNN/A
        Cena (bez DPH) od:
        7.37 €
        Cena včetně DPH:
        8.77 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular
        • Volume Discount

        MISUMI

        TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular

        · A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel· MISUMI's unique thinning enables excellent center biting
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        --Stainless Steel[◎]Powder high-speed steel-End Mill ShankAvailableTiAlNN/A
        Cena (bez DPH) od:
        8.31 €
        Cena včetně DPH:
        9.89 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Carbide Step Drill Bit, With Custom Dimensions

          MISUMI

          Carbide Step Drill Bit, With Custom Dimensions

          [Features]・Introducing a standard shank type with a tip diameter / large diameter custom dimensions type to a customizable step drill bits with helical flutes.
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          --Stainless Steel[○]Carbide-End Mill ShankN/A-N/A
          Běžné datum odeslání:
          9 pracovních dnů
          Konfigurovat